Home > Microphones > Condenser Microphones > Small Diaphragm >

  DPA ST4011C Stereo Microphone Kit

DPA ST4011C
DPA ST4011C
 
List Price: $3,349.95
Our Price: $3,349.95


Availability: Usually Ships in 24 Hours
Product Code: 9999-13571

 

DPA ST4011C Stereo Microphone Kit

DPA ST4011C Stereo Microphone Kit

DPA ST4011C Stereo Microphone Kit Details
Whenever a small, lightweight, inconspicuous microphone for top-quality sound is required, the compact design and uniform unidirectional response of our versatile 4011C makes it the perfect choice. They are particularly popular as spot mics for classical recording and on-stage close mics for live sound.

The DPA ST4011C is a complete DPA 4011C Stereo Pair with two carefully factory-matched first order cardioid microphones. Even though the standard tolerances on DPA Reference Standards are extremely low, a stereo match is even closer.

The specially selected DPA 4011C microphones are matched within ±1 dB on both frequency response and sensitivity.

The foam design in the heavy-duty transportation box allows for fast and easy exchange of microphone/accessory inlays.

DPA ST4011C Stereo Microphone Kit Features
  • Excellent for both PA/Live and recording
  • Carefully matched within ± 1 dB
  • Low profile mounting options
  • PeliTM Case transportation and protection
DPA ST4011C Stereo Microphone Kit Includes
  • Two carefully matched 4011C cardioid microphones
  • sturdy PeliTM case
  • holders
  • windscreens

DPA 4011C Compact Cardioid Microphone Specifications

  • Directional characteristics: Cardioid
  • Principle of operation: Pressure gradient
  • Cartridge type: Pre-polarized condenser
  • Frequency range: 20 Hz to 20 kHz
  • Frequency range, ± 2 dB: 40 Hz to 20 kHz
  • Sensitivity, nominal ± 2 dB at 1 kHz: 10 mV/Pa; -40 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 18 dB(A) re. 20 µPa (max. 20 dB)
  • Equivalent noise level, ITU-R BS.468-4: Typ. 25 dB
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 76 dB(A)
  • Total Harmonic Distortion (THD): < 1 % up to 139 dB SPL peak
  • Dynamic range: Typ. 121 dB
  • Max. SPL, peak before clipping: 152 dB
  • Minimum load impedance: 2 kohm
  • Output impedance: < 200 ohm
  • Cable drive capability: 100 m (328 ft)
  • Output balance principle: Impedance balancing with Active Drive
  • Common Mode Rejection Ratio (CMRR): > 50 dB
  • Power supply (for full specifications): 48 V Phantom power (± 4 V)
  • Current consumption: 2.8 mA
  • Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
  • Color: Matte black
  • Weight: 58 g (2 oz)
  • Microphone diameter: 19 mm (0.75 in)
  • Capsule diameter: 19 mm (0.75 in)
  • Length: 64 mm (2.5 in)
  • Output voltage, RMS: > 4 V
  • Polarity: +V at Pin 2 for positive sound pressure
  • Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
  • Relative Humidity (RH): Up to 90 %
  • Matching tolerance: ± 1 dB
  • Phase deviation for kit: < 10°


You may also need...
DPA DUA0019 Spacer for Stereo Boom DPA UA0837 Stereo Boom DPA UA0897 Shock Mount DPA UA0836 Stereo Boom with Holders
Our Price: $30.00

Add
Our Price: $569.95

Add
Our Price: $340.00

Add
Our Price: $759.95

Add
DPA DUA0019 DPA UA0837 DPA UA0897 DPA UA0836