Home > Microphones > Microphone Packages > Studio Microphone Packages >

  DPA SMK4060 Stereo Miking Kit

DPA SMK4060
DPA SMK4060
 
Alternative Views:


List Price: $949.95
Our Price: $949.95


Availability: Usually Ships in 24 Hours
Product Code: 9999-13579

 

DPA SMK4060 Stereo Miking Kit

DPA SMK4060 Stereo Miking Kit

DPA SMK4060 Stereo Miking Kit Details
The SMK4060 Stereo Microphone Kit is a cost-effective and flexible stereo recording solution aimed at project studios and for discreet mic setup on stage.

The SMK4060 combines two DPA 4060s omnidirectional miniature microphones, Hi-Sens, with a variety of mounting accessories. These include the BLM6000 Boundary Layer Mount, which can be used in conjunction with a 4060 (or any of DPA?s miniature mics) to place the mic on a reflective boundary such as a floor, wall, ceiling, piano lid etc, enabling them to capture the ambient sound of the area. The sound captured from this ?pressure zone has higher sensitivity, clarity and intelligibility compared to the sound captured from the "free air" and serves as a kind of acoustical zoom.

Also included in the kit is among others the DMM0007 soft rubber holder. This allows all kinds of instruments, from acoustic guitar through grand piano to drums, to be mounted in the best-sounding position, using special non-marking adhesive discs

Also available as SMK4061 with a DPA4061 Miniature Omnidirectional Microphone, Lo-Sens.

DPA SMK4060 Stereo Miking Kit Includes
  • 2 x 4060 Omnidirectional Mic, Hi-Sens, Black, 3 meter cable, high boost and soft boost grids
  • 2 x BLM6000-B Boundary Layer Mount, Black
  • 2 x DAD6001-BC MicroDot to 3-pin XLR (P48) w. Belt Clip
  • 1 x DMM0007 Universal Surface Mount, 5 pcs.
  • 2 x DMM0011-B Magnet Mount, Black
  • 1 x DUA0560 Windscreen, Black, 5 pcs.
DPA SMK4060 Stereo Miking Kit Specifications
  • Directional characteristics:  Omnidirectional
  • Principle of operation:  Pressure
  • Cartridge type:  Pre-polarized condenser element with vertical diaphragm
  • Frequency range, ± 2 dB:  Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz, High boost grid: 20 Hz - 20 kHz ±2 dB, 10 dB boost at 12 kHz
  • Sensitivity, nominal, ±3 dB:  20 mV/Pa; -34 dB re. 1 V/Pa
  • Equivalent noise level A-weighted:  Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
  • Equiv. noise level ITU-R BS.468-4:  Typ. 35 dB (max. 38 dB)
  • S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):  71 dB(A
  • Total harmonic distortion (THD):  <1% THD up to 123 dB SPL peak
  • Dynamic range:  Typ. 100 dB
  • Max. SPL, peak before clipping:  134 dB
  • Output impedance:  30 - 40 Ohm
  • Cable drive capability:  Up to 300 m (984 ft)
  • Power supply:  For wireless systems: Min. 5 V " max. 50 V through DPA adapter; with DAD6001: 48 V phantom power ±4 V.
  • Connector:  MicroDot
  • Weight:  7.5 g (0.26 oz) incl. cable and MicroDot connector
  • Microphone length:  12.7 mm (0.5 in)
  • Cable length:  3 m (9.4 ft)
  • Sensitivity selection tolerance (at 1 kHz):  ± 1.5 dB


Average Customer Review 5 of 5 Total Reviews: 1

| Write a review!


  0 of 0 people found the following review helpful:
 
first order with you February 24, 2016
Reviewer: Kevin Corcoran from San Francisco, CA United States  
excellent customer service over the phone followed by quick fulfillment of the equipment I needed, thank you.

Was this review helpful to you?