WesAudio LC-EQP Equalizer

(No reviews yet) Write a Review
Product Code: 9999-01695
WesAudio LC-EQP
Out Of Stock, Currently On Order

This item is currently on back order with the manufacturer but we have more on order. Go ahead and place your order to ensure you get one when they are back in stock. We will keep you updated as we are provided information on the arrival. If you have a deadline then please contact us before placing the order so we can meet your expectations.

WesAudio LC-EQP Equalizer

The WesAudio LC-EQP Equalizer input system is based on a Carnhill linear transformer which matching input impedance. The WesAudio LC-EQP sound can be described as clean and clear with a tube nature.

The input impedance of the WesAudio LC-EQP Equalizer is > 1.5 kohm. It Is higher than in similar class devices. As a result, the equalizer does not load the signal source, by which it is controlled. The equalization block is a passive system based on coils, resistors and capacitors. The block has been expanded with additional bands for LOW and HIGH section. The EQ section introduces a high attenuation, exceeding 25dB. A signal regenerative amplifier is a tube system, based on two triodes. The amplifier has been designed without feedback which does not distort transients. The equalizer output is symmetrical. A Carnhill transformer is responsible for output symmetrization, which provides a low output impedance. The anode and heater voltage are stabilized. WesAudio LC-EQP is powered by alternating current 230V / 115V, which can be selected by a voltage selector. The casing is 2U rack made of 1.5mm stainless steel whereas the aluminum front panel is 4mm. LOW section has separate boost regulations and frequency cut offering six bands. HIGH BOOST section has a selection of 12 bands and a regulation of Q factor . HIGH CUT section is equipped with 6 bands. An EQ IN switch is a “True Bypass” type. Switching the equalizer is indicated by a red LED.

The WesAudio LC-EQP sound can be described as clean and clear with a tube nature. It is an ideal equalizer on both, single tracks and the sum. LC-EQP WesAudio handles well controlling other studio devices thanks to low output impedance. It was designed as a universal musical equalizer to use in professional recording studios.

  • EQ In/Bypass switch with LED "on" indicator
  • Low Boost (0 to 18dB)
  • Low Cut (0 to 20dB)
  • Bandwidth Q adjustment from 0 to 10
  • High Boost (0 to 18dB)
  • High Cut - "Shelf Type" (0 to 20dB)
  • LED Power Indicator
  • Fuse protected main power IEC connector
  • Balanced XLR in and out

WesAudio LC-EQP Equalizer Specifications

  • Gain: 0dB (+/- 0.5dB)
  • Input impedance: >1.5kohm
  • Output impedance: 150ohm
  • Max. output level: +22dBu (0.8% THD)
  • Frequency response: 5Hz – 65kHz (-3dB)
  • SNR ratio: 90dB
  • LOW BOOST: max +18dB
  • LOW CUT: max -18dB
  • HIGH BOOST: max +20dB
  • HIGH CUT: max -18dB
  • LOW BOOST: 20, 30, 60, 100, 120, 250 Hz
  • LOW CUT: 20, 30, 60, 100, 120, 250 Hz
  • HIGH BOOST: 1, 1.5, 2, 3, 4, 5, 6, 8, 10, 12, 16, 20 kHz
  • HIGH CUT: 2, 4, 6, 12, 16, 20 kHz
  • AC mains: 115(60Hz) / 230V(50Hz)
  • Transformer balanced output and input (XLR Neutrik)
  • Case Rack 2U
  • Dimensions : 88 x 483 x 237 mm
  • Weight: 7 kg

WesAudio LC-EQP Equalizer Includes

  • WesAudio LC-EQP Equalizer
  • Power Cable
  • Manual
  • 3 Year Warranty

WesAudio LC-EQP Equalizer Downloads

Click here to view all WesAudio products

Nice Product

this is nice product

No review yet, Be first to Write a Review