Studio Technologies Model 35 Talent Amplifier
Studio Technologies Model 35 Talent Amplifier
Studio Technologies Model 35 Talent Amplifier Details
The Studio Technologies Model 35 Talent Amplifier is a full-featured stereo headphone amplifier (cue) for use with the StudioComm 55/56 Stereo Monitoring System or StudioComm 74/75 Surround Monitoring System.
Model 35 modules are typically deployed in voice-over booths, studio areas, or other locations where voice or music talent needs access to a headphone cue feed. Using a standard 3-pin XLR-type audio cable, the Model 35 connects directly to, and is powered by, a StudioComm 55/56 or StudioComm 74/75 system. The Model 35 provides a stereo audio amplifier, built-in level control, stereo/mono switch, and support for one or two pairs of headphones. Up to four Model 35 Talent Amplifier modules can be used with a StudioComm 55/56 or StudioComm 74/75 system.
Studio Technologies Model 35 Talent Amplifier Specifications
- Power Requirements: +20-32 volts DC (modulated with left channel audio), provided by Model 55 or Model 74 Central Controller
- Power Present LED: red, indicates presence of operating power
- Connectors:
- Input (from Model 55 or Model 74): 3-pin XLR-type, female
- Loop Thru: 3-pin XLR-type, male, connected in parallel with input connector
- Headphone Outputs: 2, ¼ -inch, 3-conductor (stereo) phone jacks
- Headphone Output: 1, feeds two headphone jacks
- Load: intended for connection to one or two pairs of headphones with total impedance of 75 ohms or greater
- Output Level: user adjustable
- Maximum Output Voltage: 16 V peak-to-peak into 150 ohms @ 1% THD+Noise, 400 Hz
- Distortion (THD+N): 0.03%
- Frequency Response: 20 Hz-20 kHz ±0.5 dB
- Dimensions (Overall):
- 4.2 inches wide (10.7 cm)
- 2.0 inches high (5.1 cm)
- 5.3 inches deep (13.5 cm)
- Mounting: desktop; microphone stand mounting adapter included
- Weight: 0.8 pounds (0.4 kg)
No review yet, Be first to Write a Review