Shure SLX14/84 Lavalier Wireless System
Shure SLX14/84 Lavalier Wireless System Includes SLX1 and WL184 Supercardioid Condenser Microphone
Shure SLX14/84 Lavalier Wireless System Details
Shure SLX14/84 Lavalier Wireless System Specifications
Band |
Range |
Transmitter Output |
H5 |
518â?"542 MHz |
30 mW |
J3 |
572â?"596 MHz |
30 mW |
L4 |
638â?"662 MHz |
30 mW |
P4 |
702â?"726 MHz |
30 mW |
R13 |
794-806 MHz |
20 mW |
R5 |
800â?"820 MHz |
20 mW |
S6 |
838â?"865 MHz |
10 mW |
JB |
806â?"810 MHz |
10 mW |
Q4 |
740â?"752 MHz |
10 mW |
-
Operating Range Under Typical Conditions
100m (300 ft.) Note: actual range depends on RF signal absorption, reflection, and interference -
Audio Frequency Response (+/â?" 2 dB)
Minimum: 45 Hz
Maximum: 15 kHz
(Overall system frequency depends on microphone element.) -
Total Harmonic Distortion (ref. +/â?" 38 kHz deviation, 1 kHz tone)
0.5%, typical -
Dynamic Range
>100 dB A-weighted -
Operating Temperature Range
â?"18°C (0°F) to +57°C (+135°F)
Note: battery characteristics may limit this range -
Transmitter Audio Polarity
Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output.
-
Audio Input Level
-10 dBV maximum at mic gain position
+10 dBV maximum at 0 dB gain position
+20 dBV maximum at -10 dB gain position -
Gain Adjustment Range
30dB -
Input Impedance
1 MÃ? -
RF Transmitter Output
30 mW maximum (dependent on applicable country regulations) -
Dimensions
108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.) -
Weight
81 grams (3 oz.) without batteries -
Housing
Molded ABS case -
Power Requirements
2 â??AAâ? size alkaline or rechargeable batteries -
Battery Life
>8 hours (alkaline)
-
Audio Input Level
+2 dBV maximum at -10dB position
-8 dBV maximum at 0dB position -
Gain Adjustment Range
10dB -
RF Transmitter Output
30 mW maximum (dependent on applicable country regulations) -
Dimensions (including SM58 cartridge)
254 mm x 51 mm dia. (10 x 2 in.) -
Weight
290 grams (10.2 oz.) without batteries -
Housing
Molded PC/ABS handle and battery cup -
Power Requirements
2 â??AAâ? size alkaline or rechargeable batteries -
Battery Life
>8 hours (alkaline)
-
Dimensions
42 mm H x 197 mm W x 134 mm D (1.65 x 7.76 x 5.28 in.) -
Weight
816 g (1 lb. 13 oz.) -
Housing
Galvanized steel -
Audio Output Level (ref. +/â?" 38 kHz deviation with 1 kHz tone)
XLR connector (into 600 Ã? load): â?"13 dBV
1/4 inch connector (into 3000 Ã? load): â?"2 dBV -
Output Impedance
XLR connector: 200 Ã?
1/4 inch connector: 1kÃ? -
XLR output
Impedance balanced
Pin 1: Ground (cable shield)
Pin 2: Audio
Pin 3: No Audio -
Sensitivity
â?"105 dBm for 12 dB SINAD, typical -
Image Rejection
>70 dB, typical -
Power Requirements
12â?"18 Vdc at 150 mA, supplied by external power supply
No review yet, Be first to Write a Review