Samson MCD2 Pro Passive Direct Box

(No reviews yet) Write a Review
Product Code: 9999-01155
Samson MCD2 Pro
In Stock, Usually Ships In 24 Hours

Samson MCD2 Pro Passive Direct Box

Samson's MCD2 Pro Stereo Passive PC Direct Box is the ideal solution for connecting unbalanced line level signals from laptops, CD/MP3 players, and DJ mixers to professional, balanced equipment.

Durable, roadworthy construction and two Mu-metal shielded transformers provide high-quality signal connection solutions for a variety of live sound and recording applications. The MCD2 Pro features two of Samson's STLX Mu-Metal shielded transformers that deliver an extended, flat frequency response with ultra-low distortion and superior protection against hum and RF interference. The MCD2 Pro's balanced outputs provide clean signals that are less susceptible to noise than unbalanced lines, allowing for longer cable runs.

The MCD2 Pro features dual 1/4", RCA and a stereo 1/8" input to accommodate any line level instrument or consumer audio connection. Its selectable Stereo/Mono sum switch allows users to accommodate typical mono "house" PA systems. Additionally, a 2-position 0dB/-12dB attenuation switch provides users with ample headroom to handle hotter inputs.

Housed in a 14-guage noise-reducing steel chassis, the MCD2 Pro is built to withstand the abuse of the most demanding live tours. Its rigid outer shell protects all the MCD2 Pro's internal connections, switches and solder joints from failure, ensuring quiet, reliable performance.

Samson MCD2 Pro Passive Direct Box Features

  • All-metal, impact resistant design
  • Dual Samson STLX Mu-Metal shielded transformers
  • Stereo/Mono sum switch
  • 2-position 0dB/-12dB attenuation switch
  • Ground Lift switch
  • Dual 1/4" and RCA inputs
  • Stereo 1/8" input
  • Dual balanced XLR outputs
  • No Phantom or Battery power required

Samson MCD2 Pro Passive Direct Box Specifications

  • Type: Stereo Passive Direct Box
  • Frequency Response: 18Hz to 40kHz ±0.1dB
  • Maximum Input: +20dBu 0.35% THD
  • Dynamic Range: >100dB @ Balanced Output
  • Noise Floor: -117dB
  • Total harmonic distortion: <0.03% from 20Hz to 40kHz
  • Input impedance: 400kΩ (Stereo Switch Position), >10k (Mono Switch Position)
  • Output Impedance: 250Ω ±20%
  • Transformers: Two STLX Faraday Shielded Transformers
  • Transformer Ratio: 15:1
  • Input PAD Switch: 0dB, -15dB, -30dB
  • Ground Lift: Switch Disconnects XLR pin-1 (Output)
  • Stereo/Mono Switch: Sums stereo inputs to both outputs
  • Connectors: 1/4” Phone Jack, RCA, Stereo 1/8” unbalanced, XLR balanced (Output)
  • Construction: 14 gauge steel chassis
  • Dimensions: 6.1” x 3.93” x 1.77”
  • Weight: 2.11lb

Samson MCD2 Pro Passive Direct Box Downloads

Click here to view all Samson products

Nice Product

this is nice product

No review yet, Be first to Write a Review