Rupert Neve 5033 Portico Equalizer
The Rupert Neve 5033 Portico Equalizer features a vertical design and Rupert's custom input and output transformer designs, five bands of EQ based on his traditional curves, +/-12dB input level adjustment, and five filter bypasses.
On the input and output of the 5033 lie custom-designed Rupert Neve transformers, a hallmark of his classic designs. The EQ section can be completely bypassed and the unit can be used as a very high quality line driver utilizing these transformers, which can help to add sonic "sweetness" to a source.
Low Frequency and High Frequency Shelving Filters
For opposite ends of the audio spectrum there are two separate shelving filters, which are both engaged or disengaged using the same LED pushbutton. Each shelving filter allows for a boost or cut of up to 12dB, providing steeply rising or falling curve shapes. When these curves are aggressively boosted or cut, they enable the second and even third harmonic to be varied in relation to their fundamental, allowing the natural sound of a musical instrument to be varied. When used more moderately, one can attenuate bands of frequencies above or below the "turnover" point to their desired levels. These sections each provide EQ curves that approximate to 6 dB/octave and give a true "Flat" response when this section is engaged but not boosted or attenuated.
Low Frequency (LF) Shelving Filter
Continuously variable from 30Hz to 300Hz, allowing for a wide range of applications, from filtering out low rumbles caused by air conditioning units to taming an instrument with too much low end or even adding a little bit of "oomph" to a thin mix, proving to be an indispensable asset in the signal chain.
High Frequency (HF) Shelving Filter
Continuously variable from 2.5kHz to 25kHz, giving this section of the EQ a valuable range of operation. Whether you want to really bring out the presence and breath of your vocals or simply add some "air" to your overall mix, the HF shelving filter will give you that bit of sparkle you’re looking for.
Mid Range Parametric Filters
To cover the crucial mid-range, the 5033 comes with three bands of parametric EQ, each separately engaged and having a true "flat" response when each section is engaged but not boosted or attenuated. Each section is capable of boosting or attenuating up to 12dB, and includes a variable "Q" control. "Q" controls range from 0.6 to 3, allowing you to vary the bandwidth of the attenuation or boost – whether a broad range of frequencies to gently give a sonic section a slight boost or dip or using the filter with a very narrow range of frequencies, acting like an "audio chisel" to precisely hone in on offending frequencies.
The Low Mid Frequency (LMF) section is variable from 50Hz to 400Hz. The Mid Frequency (MF) Section is variable from 330 Hz to 2.5 kHz. The High Mid Frequency (HMF) Section is variable from 2 kHz to 16 kHz. Each section has been carefully designed to overlap neighboring ranges, allowing for a very fine range of possible adjustments.
Rupert Neve 5033 Portico Equalizer Features
- TRIM: Provides fine gain adjustment continuously over a range of +/- 12 dB.
- ALL BYPASS: Push button inserts or bypasses the entire EQ circuit
- LF SECTION: Continuously variable shelving filter with a frequency range of 30 Hz to 300 Hz; continuously variable gain of +/- 12
- LMF SECTION: Continuously variable frequency range of 50 Hz to 400 Hz; continuously variable Q; continuously variable gain of +/- 12; IN pushbutton inserts or bypasses LMF Section
- LMF IN: Inserts the LMF Section into the circuit
- MF SECTION: Continuously variable frequency range of 330 Hz to 2500 Hz; continuously variable Q; continuously variable gain of +/- 12; IN pushbutton inserts or bypasses LMF Section
- MF IN: Inserts the MF Section into the circuit
- HMF SECTION: Continuously variable frequency range of 1.8 kHz to 16 kHz; continuously variable Q; continuously variable gain of +/- 12; IN pushbutton inserts or bypasses LMF Section
What We Think
Another amazing offer from Rupert Neve, the 5033 EQ provides a smooth and accurate sound that allows you to contour, or seriously tweak your audio. Even when boosting the top end at +12dB, it just opens things up - no harshness, artifacts, or over characterization. The EQ has that Rupert Neve Designs sound, and is very rich. No matter what you are EQ'ing, this guy will handle it beautifully. The Rupert Neve 5033 reminds me of the EQs on high end large format consoles, and will be your go to EQ, no matter the sound source (vocals, guitars, drums, etc), and no matter the genre. A worthy investment (as is with all Rupert Neve Designs).
- Ryan Ferris
No review yet, Be first to Write a Review