Radial JX-62 Guitar Switcher

(No reviews yet) Write a Review
Product Code: 9999-15703
Radial JX-62
We Need A Few Days

This item must be ordered in from the manufacturer. Give us a few days to get it here and heading your way. Go ahead and place your order and we will let you know as soon as it ships. If you have a deadline then please contact us before placing the order so we can meet your expectations.

Radial JX-62 Guitar Switcher

The Radial JX-62 Guitar Switcher is a guitar and amp switcher designed for both wired and wireless guitars in a live concert touring environment. It features Radial's award winning 100% discrete, class-A buffers for optimal signal transfer without distortion or artifact and isolated outputs to eliminate hum and buzz caused by ground loops.

The Radial JX-62 Guitar Switcher comes housed in a 1 RU, 19" rack enclosure. The design of the Radial JX-62 Guitar Switcher begins with 6 input channels, all of which are equipped with ¼" input and separate thru for a dedicated amplifier plus a trim control to balance the signal levels. Channels 1 and 2 are supplemented with Drag™ Control load correction to optimize tone when using wired connections. Channels 5 and 6 are equipped with dedicated Radial DI box outputs to send a 'clean' acoustic or bass signal direct to the PA system. Any or all channels may be active at one time and routed to a master bus which offers choice of AB outputs and features an effects loop for pedal trays. Both AB outputs are transformer isolated to eliminate ground loops and equipped with ground lift switch and polarity reverse to phase align amps if reversed. Both XLR and ¼" outputs are available for greater flexibility. Switching between outputs may be done from the front panel via an optional Radial JR2 remote footswitch.

For the stage tech, the Radial JX-62 Guitar Switcher sports a PFL (pre-fade-listen) and headphone amp that enables any or all inputs to be monitored without affecting the output. A separately buffered tuner/monitor output on the front panel follows the PFL select and may be used for quiet tuning.

Radial JX-62 Guitar Switcher Features

  • Select between 6 guitars and 2 amps
  • 100% discrete, class-A buffers for best sound
  • PFL and headphone amp for system checks
  • 2 built-in Radial DI boxes for acoustic guitars

Radial JX-62 Guitar Switcher Applications

  • Using the JX62 with a guitar rig - The Radial JX-62 is the ultimate instrument and amp selector for a busy rock star! Connect four wireless guitars and then switch between two amps using the optional JR2 footswitch. Add a couple of acoustics with direct outs to the PA system.
  • Using the JX62 with a bass setup - Use the Radial JX-62 to switch between your favorite electrics and an upright. Channels 5 and 6 have direct outs to feed the PA system, eliminating the need for external direct boxes. Use the optional JR2 to mute the basses when tuning or switching instruments.
  • Using the JX62 with a multi-instrumentalist - With six inputs, the Radial JX-62 makes it easy to switch between six instruments on stage. Individual trim controls let you match the signals for the perfect balance. Use the direct outs with some Radial DI boxes if you have channels to spare!

Radial JX-62 Guitar Switcher Specifications

  • Technical Specs:
    • Audio Circuit Type: Class-A buffers with optical switching
    • Frequency Response: 20Hz ~ 20kHz (± 1dB)
    • Dynamic Range: 120dB
    • Maximum Input: +18dBu
    • Total Harmonic Distortion: 0.007%
    • Phase Deviation: <10° @ 50Hz
    • Intermodulation Distortion: 0.027%
    • Equivalent Input Noise: -94.7dBu
    • Noise Floor: -89.7dBu
    • Input Impedance: Variable from 22K Ohm to 1M Ohm
    • Output Impedance - XLR Output: 680 Ohms
    • Output Impedance - Phone Output: 3500 Ohms
    • Clip Level - Headphone Output: 5V RMS (Really loud!)
    • Gain - Channel Input to XLR Output: +5dB
    • Clip Level - Front Panel Tuner Out: +22dBu
    • Clip Level - Channel Output: +22dBu
  • Connections:
    • Unbalanced Inputs: 6 x ¼" hi-Z guitar inputs
    • Unbalanced Thru-puts: 6 x ¼" hi-Z guitar thru-puts
    • Unbalanced Outputs: 4 x ¼" hi-Z amplifier outputs, 2 x tuner out
    • Balanced Outputs: 4 x XLR lo-Z XLR male
    • Effects Loop: ¼" send & receive
    • Remote: ¼" TRS & XLR for optional JR2 remote
  • General:
    • Power: External supply 500mA with XLR-4 connector
    • Construction: 14 gauge steel chassis & outer shell
    • Finish: Durable powder coat
    • Size (L x W x H): 17.5" x 6" x 1.75" (44.5cm x 15.25cm x 1.75cm)
    • Weight: 6.95lb (3.2kg)
    • Shipping Size (L x W x H): 22" x 10.375" x 4.5" (55.9cm x 26.4cm x 11.4cm)
    • Shipping Weight: 9.2lb (4.2kg)

Radial JX-62 Guitar Switcher Includes

  • Radial JX-62 Guitar Switcher
  • User Guide
  • 3 Year Warranty

Radial JX-62 Guitar Switcher Downloads

Click here to view all Radial products

Nice Product

this is nice product

No review yet, Be first to Write a Review