The Millennia HDOE Expansion Card is designed for use with the HV-3D and provides 2 additional fully-buffered analog outputs per channel for a total of three outputs per channel.
The HDOE's laser-trimmed FET-based output stage has 32 dB headroom and easily drives 1000 foot (300 m) cable runs. For maintaining sonic integrity throughout each output, each Output Expander Option features identical circuits as the Preamp main outputs. DB25 Connectors conform to the Tascam wiring standard allowing for quick and easy field-interactivity with standard cabling. For flexibility with a variety of recorders, 13.5 dB of attenuation is available on each set of 8 outputs ( use this to create safety tracks for wide dynamic sources that may overload converters downstream).
Millennia HDOE Expansion Card Features
- Provides TWO additional fully-buffered analog outputs per channel (total three outputs per channel)
- Laser-trimmed FET-based output stage has 32 dB headroom: drives 1000 foot (300 m) cable runs with ease
- Output Expander Options have identical circuits as the Preamp main outputs
- DB25 Connectors that conform to the Tascam wiring standard
- 13.5 dB of attenuation available on each set of 8 outputs - use to create safety tracks for wide dynamic sources that may overload converters downstream
- All HV-3D/HV-3R units can have the option installed
Millennia HDOE Expansion Card Specifications
- Number of Available Outputs
- 3 outputs per channel (1 on XLR, 2 on Tascam pin-out DB25s)
- Frequency Response
- +0 / -3 dB: sub 3 Hz to beyond 300 kHz
- Noise
- 60 dB Gain, 10 Hz - 30 kHz, Inputs common: -133 dB EIN
- Total Harmonic Distortion + Noise
- 35 dB Gain, 10 Hz - 20 kHz bandwidth, +27 dBu Out: < .001%, Typ. < .0005% (< 5 ppm)
- Intermodulation Distortion
- (50 Hz & 7 kHz) 35 dB Gain, +27 dBu Out: < .0009%
- Phase Response
- 35 dB Gain, 50 Hz - 20 kHz bandwidth, +27 dBu Out: < 2 degrees deviation
- Common Mode Rejection Ratio
- 35 dB Gain, 10 Hz - 20 kHz bandwidth, 100 mV C.M.: > 65 dB, Typical > 85 dB
- Slew Rate
- 35 dB Gain, +27 dBu Out: > 25 Volts per microsecond
- Maximum Output Level
- 20 Hz - 40 kHz: +32 dBu
- Output Attenuation: 13.5 dB internal jumper selectable
- Output Impedance: 24.3 Ohms (x2)
Millennia HDOE Expansion Card Downloads
No review yet, Be first to Write a Review
Write a Review
