Mackie PPM1012 Powered Mixer

(No reviews yet) Write a Review
Product Code: 9999-03137
Mackie PPM1012
We Need A Few Days

This item must be ordered in from the manufacturer. Give us a few days to get it here and heading your way. Go ahead and place your order and we will let you know as soon as it ships. If you have a deadline then please contact us before placing the order so we can meet your expectations.

Mackie PPM1012 Powered Mixer

The Mackie PPM1012 Powered Mixer is an ultra-lightweight, immensely powerful mixer equipped with tools to get the perfect sound anywhere without breaking your back. Legendary Mackie circuitry combined with road worthy design and portability result in this ultimate professional powered mixer.

The Mackie PPM1012 Powered Mixer is 1600 watt 12-channel powered mixer features dual Mackie-designed Class-D Fast Recovery™ amplifiers which provide the kind of power required for modern speakers, 32-bit RMFX+ “Gig Ready” FX and premium Mackie mic preamps for the ultimate powered mixer.

The Mackie PPM1012 professional powered mixer features two ridiculously robust power amps for mains and/or monitors (800W + 800W). With 1600 watts of system power, the Mackie PPM1012 is in a class of its ownfully capable of powering a huge system (try a couple S215s AND a pair of C300s!) The Mackie custom designed the Mackie PPM1012 with Class-D amps, which are cool-running and boast maximum efficiency, keeping your sound pumping until they start kicking people out. The Mackie had to include Mackie's proven Fast Recovery circuitry, eliminating the risk of pesky amp latching. The result is a distortion free mix even when pushing peak levels. The built-in limiter can go toe-to-toe with the most popular outboard stereo limiters used in live sound today, protecting your speakers from damage. The limiter's attack and release times are specifically selected to address full-bandwidth music and will not muddy things up by adding any unwanted pumping. PPM mixers are surprisingly lightweight, but tremendously powerful. You can push the Mackie PPM1012 to its maximum output, distortion free!

The Right Tools for the Job

Most powered mixers out there have either a limited set of mixing tools, keeping your mix decidedly average or they cram in a mind-boggling amount of lame effects that you would never use. Every professional carries the right tools for the job, so the Mackie PPM1012 comes with a great-sounding, highly useable toolkit.

"Gig Ready" Effects

The all-new RMFX+ (Running Man FX) 32-bit effects processor brings "gig ready" useable effects to your mixes. Why scroll through hundreds of bizarre effects, like "ghost ambience" Yeah, like anyone even knows what that means. Or how about winners like "delay+phaser2", which you'll never use in a million years. Those other mixers will leave your fingers raw from all the scrolling you have to do. The RMFX+ processor features 24 solid FX that are known for their utility and usability. Small, medium and large room reverbs with the choice of a warm or bright characteristic put your mix in the right space. Simple, rich choruses and an array of practical delays enable you to create professional mixes without requiring a two-hour sound check. Also, the RMFX+ is the first onboard processor to feature a user tap function. So if you want to use a delay, but the Mackie's preset delay time doesn't work, you can tap it in instantly! Basically, the Mackie has delivered a full rack of gear at your fingertips that is easy to master, allowing you to look really and sound really good at your next gig. Really, really good.

Absolutely Armored

The Mackie PPM1012 is fully armored inside a solid steel chassis, helping to protect the electronics from any potential environmental hazard (Think beer.) Extremely durable polycarbonate ABS end caps will protect the Mackie PPM1012 from years of abuse caused by tossing it in and out of the truck or falling off the stool at rehearsal. Each Mackie PPM1012 features rounded front with recessed controls, so if it rolls on its face in the van or gets kicked over at the show, you can be sure that it will emerge damage-free. Two metal side handles allow you to easily pick it up and get going. It's ultra-light so you won't need both hands!

Matching Made Easy

Look, the Mackie wants to make things as easy for you as possible. Matching speakers to amps can suck the fun out of an otherwise pleasant trip to the music store. Keeping that in mind, PPM mixers and Mackie passive speakers were made for each other. The Mackie even included the one-touch Precision Passive EQ button, which is designed to make our speakers sound better than ever. From our popular C series (C300/200) to their S series (S200/S400), Mackie designed their mixer to match the power requirements of their passive speakers perfectly. Try driving a pair of S225 15" speakers off someone else's mixer. You can almost smell the smoke now! Yet this is child's play using a PPM and a pair of Mackie S225s. The Mackie easily provides enough power for a complete system. In fact, they've got the bollocks to drive two of their S215 15" 2-way speakers off the mains AND a pair of C300s as Monitors without needing outboard amps. Others may try but, ultimately, don't provide the necessary power. So if you want a truly professional set of tools for your next gig, including a Mackie mixer, onboard compressors, Fast Recovery amplification, twin graphic EQs, and "gig-ready" effects, pair up a Mackie PPM1012 Mixer and any Mackie Precision Passive loudspeakers for the ultimate, portable, professional P.A. system.

Mackie PPM1012 Powered Mixer Features

  • Full-featured 12-Channel, 1600W Powered Desktop Mixer with onboard effects
  • 800W + 800W peak Mackie designed Class-D, Fast Recovery™ power amplifiers
  • Dual 32-bit RMFX+™ processors featuring 24 “Gig Ready” reverbs, choruses, and tap delay
  • Eight mic/line mono inputs and two stereo line inputs with 4-segment LEDs
  • Mackie high-headroom, low-noise mic preamps with RF rejection and switchable 48V phantom power
  • Six dedicated In-line Compressors
  • 3-Band channel EQ with a Mid sweep (100 Hz – 8 kHz) on mono channels and 4-band EQ on stereo line channels 9/10 and 11/12
  • DI inputs for direct instrument connections on channels 7 and 8
  • Four aux sends – two Mon and two FX
  • Dual 9-Band graphic EQs on the Mains and Monitor outputs
  • Mono output with level control and low pass filter adjustable from 75 Hz – 100 Hz
  • 3-Mode two-channel Amplifier, switchable as Mains Stereo L/R, Mono Mains/Monitor 1, or Mon 1 and Mon 2
  • Precision Passive EQ for enhanced clarity and low-frequency response with Mackie passive loudspeakers
  • 12v BNC lamp Jack
  • Built-like-a-tank metal chassis with a handle built into the front of the mixer for easy transport
  • Lightweight and portable

Mackie PPM1012 Powered Mixer Specifications

  • Noise Characteristics:
    • Equivalent Input Noise (EIN): (mic input, 150 ohm source impedance, 20 Hz to 20 kHz) –128 dBu
    • 1 kHz, 30 kHz Bandwidth:
      • Main Mix Level Down, All Channel Levels Down: –95 dBu
      • Main Mix Level 0 dB, All Channel Levels Down: –89 dBu
      • Main Mix Level 0 dB, All Channel Levels 0 dB: –84 dBu
    • Gain:
      • Mic Mono Input: 0 dB to +50 dB
      • Line Mono Inputs: –20 dB to +30 dB
      • Line Stereo Inputs: –20 dB to +20 dB
  • Frequency Response:
    • Mic Mono Input (+0 / –3 dB):
    • Line Mono Inputs (+0 / –3 dB):
    • Line Stereo Inputs (+0 / –3 dB):
  • Distortion (THD+N):
    • 1 kHz, 30 kHz Bandwidth:
      • Mic Mono: <0.003%
      • Line Mono: <0.005%
      • Line Stereo: <0.003% at main out
  • Maximum Input Levels:
    • Mic Mono Input: +21 dBu Minimum gain
    • Line Mono Inputs: +21 dBu
    • Line Stereo Inputs: +21 dBu
  • Maximum Output Levels:
    • Preamp Main and Monitor Outputs: +21 dBu
  • Loudspeaker Outputs: (Both channels loaded and driven at 1 kHz)
    • Peak Output Power @ 4 Ohm: 2 x 800 W peak
    • RMS Output Power @ 4 Ohm: 2 x 400 W rms, 1% THD, 2 x 500 W rms, 3% THD
    • RMS Output Power @ 8 Ohm: 2 x 250 W rms, 1% THD, 2 x 300 W rms, 3% THD
    • Recommended Load Impedance: 4 – 8 ohm per channel
  • Equalization:
    • High Shelving (All Channels): ±15 dB @ 12 kHz
    • Mid Mono Channels:
      • Mid Peaking, Sweepable: ±15 dB
      • Mid Sweep Range: 100 Hz to 8 kHz
    • Mid Stereo Channels:
      • Hi Mid Peaking: ±15 dB @ 2.5 kHz
      • Lo Mid Peaking: ±15 dB @ 400 kHz
    • Low Shelving (All Channels): ±15 dB @ 80 Hz
    • 9-Band Graphic EQ: ±15 dB @ 63, 125, 250, 500,
    • Main and Monitor 1: 1k, 2k, 4k, 8k and 16 kHz
  • Digital Effects:
    • Processor: Two 32-bit
    • Input/Output: Mono input / Stereo output
    • Number of Presets: 24
  • Impedances:
    • Mic Mono Input: 3.6 k ohm, balanced
    • Line Mono Input: 20 k ohm, balanced
    • Line Mono Input, Ch 7, 8 Hi-Z: 500 k ohm unbalanced
    • Main & Monitor Preamp Outputs: 240 ohm balanced, 120 ohm unbalanced
  • AC Power Requirements:
    • US: 100 – 120 VAC, 50 – 60 Hz, 250W
    • EU: 200 – 240 VAC, 50 – 60 Hz, 250W
    • AC Connector: 3-pin IEC 250 VAC
    • Operating Temperature: 0 ° – 40 °C / 32 ° – 104 °F
  • Physical Properties:
    • Height: 5.2 in / 133 mm
    • Width: 17.4 in / 442 mm
    • Depth: 19.2 in / 487 mm
    • Net Weight: 29.0 lb / 13.2 kg

Mackie PPM1012 Powered Mixer Includes

  • Mackie PPM1012 Powered Mixer
  • Rack Ears
  • Owners Manual
  • 1 Year Warranty

Mackie PPM1012 Powered Mixer Downloads

Click here to view all Mackie products

Nice Product

this is nice product

No review yet, Be first to Write a Review