Focusrite RedNet 1 Network Interface

(No reviews yet) Write a Review
Product Code: 9999-17269
Focusrite RedNet 1
We Need A Few Days

This item must be ordered in from the manufacturer. Give us a few days to get it here and heading your way. Go ahead and place your order and we will let you know as soon as it ships. If you have a deadline then please contact us before placing the order so we can meet your expectations.

Focusrite RedNet 1 Network Interface

The Focusrite RedNet 1 Network Interface is a multichannel, bidirectional analogue interface for use with a RedNet digital audio networking system. It is a near-zero-latency networking protocol which allows for easy system and I/O expansion while offering a wide range of connectivity options.

The Focusrite RedNet 1 Network Interface connects to your Dante™ audio-over-IP network with a single Ethernet cable. It's remotely controlled via the network and can be placed anywhere in your facility. It offers eight channels of line-level analogue in and out, with Focusrite's precision 24-bit A-D and D-A conversion for superb audio performance, and 119dB dynamic range at sample rates up to 192kHz. The rear panel includes AES59 standard DB25 connectors for analogue patchbay or breakout cable interfacing.

Focusrite RedNet 1 Network Interface Features

  • Eight channels of high-quality line-level analogue I/O for Dante audio-over-IP networks
  • 24-Bit precision conversion up to 192kHz
  • 119dB Dynamic range, flat from 20Hz – 20kHz, +/-0.15dB
  • Software-selectable +24dBu or +18dBu level alignment
  • AES67 compliant; may require hardware update. Please contact us for further information
  • Analogue I/O to AES59 standard on DB25 connectors
  • Comprehensive front-panel metering and indicators
  • Remote monitoring software with powerful graphic user interface

Focusrite RedNet 1 Network Interface Specifications

  • Inputs:
    • Analogue Line Inputs: 8
    • Connector: 25-Way Female Dsub, Wired to AES 59
    • 0 dBFS Reference Levels: +18 or +24 dBu (Switchable)
    • Converter Dynamic Range: 120 dB
    • Frequency Response: 20Hz-20kHz 0.05dB
    • THD N: < 0.001% Unweighted; -1 dBFS Input, 20 Hz – 22 kHz
    • Dynamic Range: 119 dB ‘A’-Weighted (-60 dBFS Method)
    • Signal-to-Noise Ratio: 119 dB ‘A’-Weighted; 20 Hz – 20 kHz
  • Outputs:
    • Analogue Line Outputs: 8
    • THD N:
    • Dynamic Range Ouput: 119 dB ‘A’-Weighted (-60 dBFS Method)
    • Converter Dynamic Range Output: 120 dB
    • Signal-to-Noise Ratio Output: 119 dB ‘A’-Weighted; 20 Hz – 20 kHz
    • 0 dBFS Reference Levels Outputs: +18 or +24 dBu (Switchable)
  • Crosstalk:
    • Input or Output to Input:
    • Input or Output to Output:
  • Digital Performance:
    • Supported Sample Rates: 44.1 / 48 / 88.2 / 96 / 192 kHz
    • Clock Sources: Internal or From Network Master Device
  • Power:
    • PSU: Internal, Universal Type, Consumption 30 VA
  • Front Panel Indicators:
    • Power: Green
    • Network Connected: Green
    • Sync Lock: Green
    • Sample Rate: Yellow x 5
    • Input/Output Range: Yellow x 2
    • Input/Output Signal Level: Bi-Colour x 16 (Green = -42 dBFS; Orange = -6 dBFS; Red = Overload)

Focusrite RedNet 1 Network Interface Includes

  • Focusrite RedNet 1 Network Interface
  • RedNet 1 User Guide (Manual)
  • RedNet System User Guide
  • 2 Meter Cat-6 Ethernet Cable
  • IEC AC Mains Cable
  • Product Registration Card with Bundle Code. Registration Gives Access to:
    • RedNet Control
    • RedNet Drivers (Installed with RedNet Control)
    • Audinate Dante Controller (Installed with RedNet Control)
    • Dante Virtual Soundcard Token and Download Instructions
    • RedNet 1 User Guide - PDF Format
    • RedNet System User Guide - PDF Format
  • 3 Year Warranty

Focusrite RedNet 1 Network Interface Downloads

Click here to view all Focusrite products

Nice Product

this is nice product

No review yet, Be first to Write a Review