Drawmer MPA90 Power Amplifier

(No reviews yet) Write a Review
Product Code: 9999-11634
Drawmer MPA90
$775.00
(You save $80.00)
$695.00
Availability: Usually Ships in 24 Hours

Drawmer MPA90 Power Amplifier

The Drawmer MPA90 Power Amplifier is a high performance Class D Stereo Power Amplifier delivering 90W per channel into 4 Ohms (50W per channel into 8 Ohms) or, when in mono, acts as a 180W into 8 Ohms Monoblock.

The Drawmer MPA90 Power Amplifier has been designed to complement the Drawmer MC1.1 Monitor Pre-Amplifier but functions just as well if partnered with the MC2.1 or MC3.1, or indeed, any other pre-amplifier. The Drawmer MPA90 is perfect for powering passive monitors in the studio, such as the classic Yamaha NS10 or Auratone C5 types, for example, but is just as capable as part of your home hi-fi system. Pairing a Drawmer MPA-90 with a MC1.1 and your favourite turntable and speakers would make a superb system to listen to your vinyl collection.

Features include thermal, overload and power up/power down protection and an output clipping indicator. In addition, it has switchable balanced XLR and unbalanced Phono inputs to suit your system.

One very smart feature of the Drawmer MPA-90 Power Amplifier is that, in addition to standard Stereo Power Amplifier operation, with the flick of a switch to set the Drawmer MPA-90 to mono mode, and a little speaker cable rewiring, it functions as a 180W into 8 Ohms Monoblock, allowing the system to operate in bi-amped or bridged modes.

Drawmer MPA90 Power Amplifier Features

  • 90+90Wrms into 4 Ohms
  • 50+50Wrms into 8 Ohms
  • 1 x 180W into 8 Ohms bridged mode
  • Stereo/Mono switch to use as a Stereo amplifier or as a Monoblock in Bridged or Bi-Amp Modes
  • Switchable balanced Neutrik XLR and unbalanced Phono inputs
  • Efficient, low heat design with Low Power Consumption
  • Consumes only 10W of power when idling
  • Maximum power consumption of 55W when driven, and only 0.2W when in standby mode
  • Thermal, overload and power up/power down protection
  • Standby, fault and clip indicators
  • Rugged steel chasis and stylish brushed aluminium cover
  • Can be stacked and is rack mountable (with the MCB 2U mounting kit)

Drawmer MPA90 Power Amplifier Specifications

  • THD @ 1W: 0.004
  • Power @ 1% THD: 50 + 50 Wrms
  • Bridged Power @ 1% THD: 180Wrms
  • Gain: 28.5dB
  • Balanced Crosstalk @ 0dBu 1KHz: < 85dB
  • Phono Crosstalk @ 0dBu 1KHz: < 79dB
  • Input Voltage for Max Unclipped Output: 775mV (0dBu)
  • Clip LED Threshold: -0.1dBu
  • Frequency Response (+/- 0.25dBu): 20Hz-20KHz
  • Output Impedance: 3m Ohms
  • Power Requirements: 115 Volt or 230 Volt at 50-60Hz, 9 Watts
  • Fuse Rating: 800mA for 230 Volt, 1.6A for 115 Volt
  • Conformity To: IEC 127-2
  • Fuse Type: 20mm x 5mm, Class 3 Slow-Blow, 250 Volt Working
  • Dimensions: (D x W x H) 276mm x 215mm x 81mm
  • Weight: 2.2 Kg

Drawmer MPA90 Power Amplifier Includes

  • Drawmer MPA90 Power Amplifier
  • Power Cable
  • User Manual
  • 1 Year Warranty

Drawmer MPA90 Power Amplifier Downloads

Click here to view all Drawmer products

No review yet, Be first to Write a Review