dbx DriveRack 220i Loudspeaker Control System

(No reviews yet) Write a Review
Product Code: 9999-02496
dbx DriveRack 220i
(You save $158.00)
Availability: Usually Ships in 24 Hours

dbx DriveRack 220i Loudspeaker Control System

The dbx DriveRack 220i Loudspeaker Control System is a system processor, designed to provide installers with programmable system processing along with Advanced Feedback Suppression AFS algorithm for superior system control and performance.

The dbx DriveRack 220i Loudspeaker Control System is designed from the ground up to provide state-of-the-art signal processing. A perfect tool for any fixed-install application. With a full complement of processing features and Mic/Line inputs the dbx DriveRack 220i can provide both system and microphone processing. Featuring the new, patent-pending Advanced Feedback Suppression (AFS) algorithm, equalization, dynamics processing, delay, matrix mixing, and bandpass filters, the dbx DriveRack 220i will exceed your expectations.

The dbx DriveRack 220i is piloted from the intuitive DriveWare GUI that offers both Configuration and Control of the processing modules. Modules can be accessed, edited and saved as part of programs. Processing modules can be linked between the channels for true stereo processing. If independent processing is desired, parameters can be copied from one channel to the next to ensure that setup is quick and easy. Stored programs can be loaded from either the front panel or from wall mounted Zone Controllers. Zone Controllers can also be used for output muting or adjusting output volumes.

dbx DriveRack 220i Loudspeaker Control System Features

  • Advanced Feedback Suppression (AFS)
  • Graphic and Parametric EQ
  • Compressor
  • Limiter
  • Auto Gain Control
  • Noise Gating
  • De-Esser
  • Ducker
  • Bandpass Filters
  • 2x2 Matrix Mixer
  • 1.3 Seconds of Delay
  • RS-232 PC GUI control
  • Mic/Line Inputs
  • Wall Panel Control
  • Security Lockout

dbx DriveRack 220i Loudspeaker Control System Specifications

  • Input: 2 x Switchable line or mic inputs
  • Input Connectors: Female XLR line inputs and Euroblock
  • Input Type: Electronically balanced/RF filtered
  • Input Impedance: >50k ohm
  • Max Input: +20dBu
  • CMRR: > 40dB, typically >55db @ 1kHz
  • Mic Preamp Gain: 30 to 60dB
  • Mic Preamp Equivalent Input Noise (EIN): < -110dB, 22Hz-22kHz, 150 ohm
  • Mic Preamp Phantom Power: +15VDC
  • Output: 2 total
  • Output Connectors: Male XLR and Euroblock
  • Output Type: Electronically balanced, RF filtered
  • Output Impedance: 120ohm balanced, 60ohm unbalanced
  • Max Output: +20dBu
  • A/D Converter: dbx Type IV™ Conversion System
  • A/D Dynamic Range: (line) >113 dB, A-weighted, >110 dB unweighted
  • Type IV Dynamic Range: >119 dB, A-weighted, 22kHz BW; >117 dB, A-weighted, 22kHz BW
  • Sample Rate: 48kHz
  • D/A Dynamic Range: 112 dB A-weighted, 109dB unweighted
  • Dynamic Range: >110 dB A-weighted, >107dB unweighted
  • THD+Noise: 0.003% typical at +4dBu, 1kHz, 0dB gain
  • Frequency Response: 20Hz – 20kHz, +/- 0.5dB
  • Interchannel Crosstalk: >110dB, 120dB typical, (input-to-output: >780dB)
  • Operating Voltage: 100 VAC, 50/60Hz, 120 VAC, 60Hz, 230VAC 50/60Hz
  • Dimensions: 19” Wide, 1.75”High, 7.7” Deep
  • Safety Agency Certifications: UL 6500, IEC 60065, EN 55013, E 60065

dbx DriveRack 220i Loudspeaker Control System Includes

  • dbx DriveRack 220i Unit
  • Printed Operation Manual
  • Warranty Registration Card

dbx DriveRack 220i Loudspeaker Control System Downloads

Click here to view all dbx products

No review yet, Be first to Write a Review