null

Audio Technica PRO 35 Instrument Microphone

(No reviews yet) Write a Review
Product Code: 1270
Audio Technica PRO 35
$149.00
UPC:
042005141104
In Stock, Usually Ships In 24 Hours

Audio Technica PRO 35 Instrument Microphone

The Audio Technica PRO 35 Instrument Microphone is designed for sax, toms, brass and percussion. Excels in high-SPL applications, this cardioid condenser clip-on instrument microphone is ideal for active stage performances.

The Audio Technica PRO 35 Instrument Microphone's extended frequency response captures subtle nuances of the performance. The included UniMount® clip permits accurate positioning and provides shock resistance while protecting the element. The Audio Technica PRO 35 Instrument Microphone’s cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.

Audio Technica PRO 35 Instrument Microphone Features

  • UniMount® clip permits accurate positioning, provides shock resistance and protects element
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • Extended frequency response captures subtle nuances of the performance
  • 6' (1.8 m) cable permanently attached to microphone

Audio Technica PRO 35 Instrument Microphone Specifications

  • Element: Fixed-Charge Back Plate, Permanently Polarized Condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 50-15,000 Hz
  • Low Frequency Roll-Off: 80 Hz, 18 dB/Octave
  • Open Circuit Sensitivity: -45 dB (5.6 mV) re 1V at 1 Pa
  • Impedance: 250 Ohms
  • Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range (Typical): 115 dB, 1 kHz at Max SPL
  • Signal-To-Noise Ratio: 64 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 11-52V DC, 2 mA Typical
  • Switch: Flat, Roll-Off
  • Weight (Microphone): 0.3 oz (8 g)
  • Weight (Power Module): 2.9 oz (81 g)
  • Dimensions (Microphone): 0.98" (25.0 mm) Long, 0.40" (10.2 mm) Diameter
  • Dimensions (Power Module): 3.66" (92.9 mm) Long, 0.74" (18.9 mm) Diameter
  • Output Connector (Power Module): Integral 3-Pin XLRM-Type
  • Cable: 6.0' (1.8 m) Long (Permanently Attached to Microphone), 0.10" (2.6 mm) Diameter, 2-Conductor, Shielded Cable with TA3F-Type Connector
  • Audio-Technica Case Style: M12

Audio Technica PRO 35 Instrument Microphone Includes

  • Audio Technica PRO 35 Instrument Microphone
  • Audio Technica AT8418 UniMount® Microphone Instrument Mount
  • Audio Technica AT8538 Power Module
  • Soft Protective Pouch
  • 2 Year Warranty

Audio Technica PRO 35 Instrument Microphone Downloads

Click here to view all Audio Technica products

5
Nice Product

this is nice product

No review yet, Be first to Write a Review