WesAudio Beta76 FET Compressor

WesAudio

(No reviews yet) Write a Review
Product Code: 9999-01694
$1,299.00
Adding to cart… The item has been added
Ships From Manufacturer

This item ships directly to you from the manufacturer so give us a day or two to get it heading your way. Go ahead and place your order and we will let you know as soon as it ships. If you have a deadline then please contact us before placing the order so we can meet your expectations.

Got Questions? Need Support?

888-228-4530 Contact Us!

The WesAudio Beta76 FET Compressor's entire system operates in class A. The element responsible for the gain reduction is a FET transistor, giving the effect of rapid and pure compression.

There is a high quality Carnhill audio transformer on the output favourably affecting the final sound of the compressor. The housing is made from high quality brushed stainless steel, whereas the panel is 4mm brushed aluminium.

The introduction of several significant structural improvements against the original version. One of the most important changes is two mode switch – Modern / Vintage – deciding on the circuit of the desymmetrization of the input signal. Modern Mode – is an electronic circuit, exactly the same as the previous version of the compressor and the Vintage mode – it's a Carnhill input transformer. The result is a universal device with two different sound possibilities. A True Bypass switch was introduced, as well as a high-pass filter in the Compressor's Side Chain path.There are three cutoff frequencies – 60, 90, 150 Hz – thanks to which Beta76 is less sensitive to low frequencies. The filter is particularly beneficial to the operation of two compressors in a stereo pair, which are easily connected with a prepared Jack-Jack cable.

WesAudio Beta76 FET Compressor Features

  • Input gain
  • Output gain
  • Attack (20 Microseconds to 800 Microseconds)
  • Release (50 Milliseconds to 1100 Milliseconds)
  • Side Chain Filter
  • Link
  • Input Mode (Vintage transformer based, Modern IC based)
  • Ratio (4:1, 8:1, 12:1, 20:1, All)
  • VU Meter (Gain Reduction, +8, +4, Off)
  • Fuse protected Main (IEC power connector)
  • Balanced XLR in and out

WesAudio Beta76 FET Compressor Specifications

  • Attack time: 20us – 800us
  • Release time: 50ms – 1100ms
  • Compression ratio: 4:1; 8:1; 12:1; 20:1
  • True Bypass
  • SC High Pass filter: 60,90,150Hz
  • Output impedance: 600ohm
  • Freq. response: 20Hz do 20kHz (+/- 1dB)
  • Signal to noise ratio SNR: >83dB
  • Enhanced Link function
  • Balanced output and input (XLR Neutrik)
  • Case Rack 2U
  • Dimensions: 88 x 483 x 235 mm
  • Weight: 6kg

WesAudio Beta76 FET Compressor Includes

  • WesAudio Beta76 FET Compressor
  • Power Cable
  • Warranty and product manual available online

No review yet, Be first to Write a Review