The Tube-Tech ME1B Tube Equalizer is one of the finest Pultec style EQs money can buy! It was developed to match and surpass the demands of even the most discerning studio engineers!
The Tube-Tech ME1B Tube Equalizer contains a low frequency boost section for peaking, a mid-frequency attenuation section for dipping, as well as a high frequency boost section for peaking. The filter section is of the the passive type followed by a tube-based push-pull amplifier to restore the gain. Input and output are balanced as well as fully floating. Input and output transformers come with a static screen between the primary and secondary wiring.
Tube-Tech ME1B Tube Equalizer Features
- Passive equalizer
- Tube based push-pull amplifier
- 5 low frequency peaks: 0.2, 0.3, 0.5, 0.7 and 1 kHz (0 to +10 dB)
- 11 mid frequency dip's: 0.2, 0.3, 0.5, 0.7, 1, 1.5, 2, 3, 4, 5 and 7 kHz (0 to -10 dB)
- 5 high frequency peaks: 1.5, 2, 3, 4, 5 kHz (0 to +8 dB)
- Frequency response @ -3 dB: 5 Hz to 40 kHz
- Low noise: < -80 dB @ -10 dB gain
- No insertion loss
- "Clickless" In/Out switch
Tube-Tech ME1B Tube Equalizer Specifications
- Impedance
- Input: 600 Ohm
- Output: <60 Ohm
- Frequency response@ -3dB 5 Hz to 40 kHz
- Distortion THD+N @ 40Hz
- 0 dBU 0.15 %
- +10 dBU 0.15 %
- Max. output: +26 dBU <1 %
- Max. input: +21 dBU <1 %
- Noise Rg=200 Ohm
- 22 Hz-22 kHz:< -80 dBU
- CCIR-468-4: < -70 dBU
- CMMR @ 10 kHz: < - 60 dB
- Gain: 0 dB
- Tubes
- ECC 82: 1 pc
- ECC 83: 1 pc
- Dimensions
- Height: 2 units, 88 mm 3.5"
- Width: 483 mm 19.0"
- Depth: 170 mm 6.7â?
- Weight
- Net: 3.8 kg 8.4 lbs
- Shipping: 5.6 kg 12.3 lbs
- Power Requirements
- @ 115 V/230 V, 50-60 Hz: 22 W
Tube-Tech ME1B Tube Equalizer Downloads
- Manual
- Specifications
- Recall Sheet
Sign Up for exclusive sales and offers!