Radial J-Iso Stereo Line Isolator

Radial

(1 review) Write a Review
Product Code: 9999-13146
$329.99
Adding to cart… The item has been added
We Need A Few Days

This item must be ordered in from the manufacturer. Give us a few days to get it here and heading your way. Go ahead and place your order and we will let you know as soon as it ships. If you have a deadline then please contact us before placing the order so we can meet your expectations.

Got Questions? Need Support?

888-228-4530 Contact Us!

The Radial J-Iso Stereo Line Isolator is a stereo line isolator designed to convert a professional +4dB line level balanced signal to an unbalanced -10dB consumer level device. This enables you to take the balanced output of a mixer and feed a consumer level recorder or audio input on a computer.

The Radial J-Iso Stereo Line Isolator employs a premium Jensen transformer for optimal signal transfer to minimize distortion and artefact. Full bandwidth performance makes the Radial J-Iso Stereo Line Isolator ideal for music production.

The passive design begins with 100% discrete components throughout. A set & forget level control lets you attenuate the input signal to prevent it from overloading the destination device. Output connections include a stereo pair of ¼" connectors, a set of RCAs and a mini 3.5mm (1/8") for interfacing to a mini recorder or lap-top computer. Transformer isolation helps eliminate hum and buzz caused by ground loops while eliminating stray DC currents from flowing.

Construction begins with 14 gauge steel throughout utilizing Radial's unique bookend construction. This creates a protective zone around the connectors and controls for added durability. The steel construction also assists by shielding the transformers from outside magnetic fields. Inside, the Radial J-Iso features an innovative I-beam skeletal insert that makes it virtually impossible to torque the PC board. This reduces potential stress which could cause premature solder joint failure.

Designed for full range applications, the Radial J-Iso Stereo Line Isolator combines exceptional signal handling with the type of durability that has made Radial famous.

Radial J-Iso Stereo Line Isolator Features

  • Converts balanced +4dB signals to unbalanced Hi-Z
  • Isolation eliminates hum & buzz from ground loops
  • 100% passive - eliminates need for power supply
  • Jensen transformers for maximum bandwidth

Radial J-Iso Stereo Line Isolator Applications

  • Using the J-Iso to record a performance - Often, the available output on a professional console is balanced +4dB. This makes it difficult to feed a portable recorder. The Radial J-Iso comes to the rescue with a simple interface and all of the connectivity you need.
  • Using the J-Iso to convert a balanced signal - The Radial J-Iso makes it easy to convert the balanced line level output from a preamp to a CD player or other consumer device. Transformer isolation further benefits by eliminating hum and buzz caused by ground loops.
  • Using the J-Iso to feed a computer - Computers are noisy at the best of times! The Radial J-Iso's premium Jensen transformers help eliminate buzz and hum while delivering exceptional audio. Adjust the set & forget level control on the J-Iso to set signal level.

Radial J-Iso Stereo Line Isolator Specifications

  • Technical Specs:
    • Audio Circuit Type: Passive, transformer based
    • Number of Channels: Stereo (dual mono)
    • Frequency Response: 20Hz ~ 20KHz (+0dB/ -1.5dB)
    • Dynamic Range: 130dB
    • Maximum Input: +20dBu @ 1kHz/1% THD+N
    • THD + Noise: 0.001% @ 1kHz
    • Phase Deviation: 0.5° @ 100Hz; 1° @ 20Hz
    • CMRR: -58dB
    • Input Impedance: 1.3k Ohms, unbalanced
    • Output Impedance: 520 Ohms, balanced
  • Features:
    • Transformer: Jensen JT-11-YMPC
    • Ground Lift: Disconnects XLR pin-1 at XLR input
    • XLR Configuration: AES standard (pin-2 hot)
    • Connectors: Balanced XLR-F in; ¼", RCA and 3.5mm TRS unbalanced outputs
  • General:
    • Construction: 14 gauge steel chassis
    • Finish: Durable powder coat
    • Size: 8.4cm x 12.7cm x 4.8cm (3.3" x 5" x 2")
    • Weight: 0.7 kg (1.55 lbs)
    • Shipping Size: 10.2cm x 7.6cm x 16.5cm (4" x 3" x 6.5")
    • Shipping Weight: 0.87 kg (1.92 lbs)
    • Power: Passive, no power required
    • Conditions: For use in dry locations only between 5°C and 40°C

Radial J-Iso Stereo Line Isolator Includes

  • Radial J-Iso Stereo Line Isolator
  • User Guide
  • 3 Year Warranty

1 Review Hide Reviews Show Reviews

  • 5
    Great box
    Stuart Martin

    I use this for sending line-level signals out of ProTools into a stomp box or Echoplex. Very easy to use, and it works.