RME ADI-6432 R BNC Format Converter (Single-Mode)
The RME ADI-6432 R BNC Format Converter provides 64 channels of format conversion from MADI to AES-3id and vice versa. Based on RME's highly successful bidirectional MADI-AES/AES-MADI converter ADI-6432, the newly developed ADI-6432R BNC offers broadcasters ease of integration and fail-safe operation through the utilization of industry standard BNC connectors and dual redundant power supplies, while offering 64 channels of I/O capability.
The RME ADI-6432 R BNC Format Converter (Single-Mode) consists of two digital format converters in reference quality, in a standard 19" box with 2 unit height. While providing 64 channels of format conversion from MADI to AES-3id and vice versa, the BNC version RME ADI-6432 R BNC Format Converter (Single-Mode) targets broadcast and professional users who require AES-3id connections - coaxial 75 Ohm cables with up to 300m length.
Typical applications include two RME ADI-6432 R used as digital multicore, or one unit used as AES-3id frontend for the HDSPe MADI card. Up to 192 kHz at 24 bits is supported. Built in 2 height units the RME ADI-6432 R BNC Format Converter (Single-Mode) provides enough space for all connectors and control elements.
AES-3id, an extension to the AES-3 standard also known as AES/EBU, carries the exact same data as the latter, but uses a different cable (75 Ohm unbalanced instead of 110 Ohm balanced) with different connectors (BNC instead of XLR) and lower voltage (1 Vpp instead of 4 Vpp). Therefore, the RME ADI-6432 R BNC Format Converter (Single-Mode) has 64 BNC connectors on its back.
The RME ADI-6432 R BNC MADI / AES Format Converter (Single-Mode) is available with Single Mode MADI connectors, which make the RME ADI-6432 R BNC MADI / AES Format Converter (Single-Mode) compatible to existing single-mode networks and to MADI signal distribution over extremely long distances (up to 10km).
As with every RME MADI converter, the RME ADI-6432R BNC provides both coaxial (BNC) and optical (SC plug to Multimode glass fiber) MADI connectors. MADI handles 64 channels of 24-Bit audio at sampling frequencies up to 48 kHz, 32 channels up to 96 kHz, and 16 channels up to 192 kHz. All channels are transferred across a single cable, either coaxial (BNC) or optical network cable. In both cases, cable lengths of more than 100 meters can be achieved. The RME ADI-6432R accepts 56 channels and 64 channels as well as 96k frame at its input, and can be set to generate those formats at its output.
RME's SteadyClock(TM) lets the RME ADI-6432R use MADI without an additional word clock connection, and guarantees excellent clock quality in every situation. Due to the highly efficient jitter reduction, any clock signal - even AES and word - can be improved and refreshed, and subsequently be used as reference clock at the unit's outputs. Intelligent Clock Control (ICC) will retain the last valid sample frequency in case of a loss of the input signal.
The RME ADI-6432R supplies word clock in Single, Double und Quad Speed, distributes Double Wire 96 kHz signals into the MADI data stream, and even supports the double MADI sample rate (96K frame). The SyncAlign ® and SyncCheck ® technologies known from other RME products ensure perfect synchronization and clear detection of errors. Also multiple units can be stacked and operated sample-aligned, using word clock. All settings are stored when the unit is switched off.
A fully automatic input selection between optical and coaxial input offers a useful redundancy mode for critical applications. Extensive status displays give information about lock and sync states, audio content and the physical quality of the incoming signal.
The front panel features an exciting and detailed sync and audio state display with 97 LEDs. Furthermore every function has its own keys accompanied by clear function LEDs. Especially in a professional application, exact, quick and direct control and display of all incoming and outgoing signals, including MIDI and RS232, becomes indispensable. Errors can be detected at a glance. The control keys can be locked to prevent accidental changing of settings.
The RME ADI-6432R BNC has a redundant power supply which can be connected to two different electrical circuits. If one of these circuits fails, the ADI-6432 R BNC will continue to operate normally.
16 MIDI channels can be transferred invisibly across MADI, at the full count of 64 audio channels. The same applies to RS232: Be it 9600, 19200 or 115200 Baud, thanks to a 9-pin COM port, the RME ADI-6432 R BNC Format Converter (Single-Mode) can be used as an extender for serial cables, with no effect on the audio functionality.
Additionally the device can be fully remote controlled and configured via MIDI, and all status displays can be queried through MIDI. Each RME ADI-6432 R BNC Format Converter (Single-Mode) can be given a separate ID, allowing separate remote controllability of various devices with only one MIDI channel.
The RME ADI-6432 R BNC Format Converter (Single-Mode) is compatible to any MADI interface from other companies, like Sony, Merging, Lawo, Euphonix, Stagetec, Jünger, Audio Service, AMS and others.
RME ADI-6432 R BNC Format Converter (Single-Mode) Connectivity
- 1 x MADI I/O (Optical and Coaxial)
- 32 x AES-3id I/O (2 x 32 BNC)
- 1 x MIDI I/O
- Com Port I/O (RS-232)
- Word Clock I/O
RME ADI-6432 R BNC Format Converter (Single-Mode) Features
- Supports up to 192 kHz with MADI and AES
- Features unique status displays for MADI and AES
- SteadyClock for maximum jitter reduction and clock regeneration
- Completely remote controlable via MIDI
- Transfers MIDI data via MADI
- Transfers RS232 data via MADI
- Redundant power supply
RME ADI-6432 R BNC Format Converter (Single-Mode) Specifications
- Manufacturer: RME
- Product: ADI-6432 R BNC MADI / AES Format Converter (Single-Mode)
- Input/Output MADI: 1 x BNC, 1 x optical
- Input AES-3id: 32 x BNC (coaxial 75 Ohm)
- Output AES-3id: 32 x BNC (coaxial 75 Ohm)
- Input Word Clock: BNC, Signal Adaptation Circuit (functional from 1.2 Vpp)
- Output Word Clock: BNC, low impedance driver stage, 4 Vpp into 75 Ohms, short-circuit-proof
- MIDI Input & Output: Via two 5-pin DIN jacks
- COM Port: RS232 via 9-pin D-sub, 9600/19200/115200 Baud
- Sync Sources: MADI, AES, word clock, internal
- Varipitch: By input signal or word clock
- Sample Frequencies: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, variable (sync/word clock)
- Sample Rate Range: MADI: 32 - 192 kHz, word clock: 27 kHz - 200 kHz, AES: 28 kHz - 200 kHz
- Jitter: Internal Clock < 1 ns, Word Clock In < 2 ns, AES-3id In < 2 ns
- Jitter Suppression: >30 dB (2.4 kHz)
- Jitter Sensitivity: All PLLs operate error-free even at 100 ns
- Power Supply: Internal switching mode PS, 100V - 240V AC, 20 Watt
- Dimensions: (W x H x D) 483 x 88 x 200 mm
RME ADI-6432 R BNC Format Converter (Single-Mode) Includes
- RME ADI-6432 R BNC Format Converter (Single-Mode)
- Power Cord
- User Manual
- 2 Years Warranty
RME ADI-6432 R BNC Format Converter (Single-Mode) Downloads
Click here to view all RME products