Home > Studio Recording > Analog Gear > Signal Processors > Splitters >

Drawmer LA12 Distribution Amplifier

Drawmer LA12
Drawmer LA12
 
Alternative Views:


List Price: $775.00
Our Price: $695.00


Availability: Usually Ships in 1 to 2 Weeks
Product Code: 1687

 

Drawmer LA12 Distribution Amplifier

The Drawmer LA12 Distribution Amplifier is a low noise low crosstalk distribution amplifier with high bandwidth specification, developed specifically for real time cassette duplication. It offers the efficient solution to interfacing multiples of real time cassette decks.

The Drawmer LA12 Distribution Amplifier provides one stereo input with master 'gain' and 'balance' controls and twelve stereo outputs, each with individual output level control. The Drawmer LA12 may be used to distribute one stereo signal to up to twelve different outputs. A typical application example would be for the distribution of one stereo signal to other rooms/areas within a complex e.g. nightclub, shopping mall etc., but it may be used for a variety of other applications, such as real time cassette duplication.

Drawmer LA12 Distribution Amplifier Features

  • One stereo input with master gain and balance controls
  • Twelve stereo outputs each with individual output level controls
  • If more than twelve stereo outputs are required an auxiliary stereo output, which follows the input gain and balance controls, can be linked to the input of a second Drawmer LA12
  • Operates at system levels in the range - 20dB to + 10dB
  • A maximum gain of + 20dB is available through the unit which allows a wide range of 'source' and 'destination' equipment to be interfaced
  • All audio connections are on professional quality phono (RCA) connectors for ease of installation

Drawmer LA12 Distribution Amplifier Specifications

  • Input Impedance: 22K Ohm
  • Maximum Gain: +10dB
  • Output Gain: -40dB to +10dB
  • Noise: Better than -100dB (ref +4dBv, Gain is equal to 0dB, @ 22Hz 22KHz)
  • Bandwidth: 5Hz 25KHz, -1dB
  • Crosstalk: -67dB @ 10KHz (Input grounded, any channel output)
  • Distortion: 0.008% @ 100Hz, 0.015% @ 1KHz to 10KHz
  • Power Requirements: 115 Volt or 230 Volt at 50-60 Hz, 7 Watts
  • Fuse Rating: 32mA for 230 Volt, 63mA for 115 Volt
  • Conformity To: BS EN 60127-2: 1991 Sheet III
  • Fuse Type: 20mm x 5mm, Class 3 Slow-Blow, 250 Volt Working
  • Dimensions: (W x H x D) 482mm x 44mm x 200mm
  • Weight: (Including packaging) 3.4 Kg

Drawmer LA12 Distribution Amplifier Includes

  • Drawmer LA12 Distribution Amplifier
  • Power Cord
  • User Manual
  • 1 Year Warranty

Drawmer LA12 Distribution Amplifier Downloads

Click here to view all Drawmer products