DPA ST2011A Stereo Microphone Kit

DPA

(No reviews yet) Write a Review
Product Code: 9999-13775
$2,400.00
Adding to cart… The item has been added
Ships From Manufacturer

This item ships directly to you from the manufacturer so give us a day or two to get it heading your way. Go ahead and place your order and we will let you know as soon as it ships. If you have a deadline then please contact us before placing the order so we can meet your expectations.

Got Questions? Need Support?

888-228-4530 Contact Us!

The DPA ST2011A Stereo Microphone Kit contains two handpicked cardioid microphones for making several stereo principles easy to obtain. Perfect for numerous stages and recording sessions, and offering a unique blend of clarity, richness and dynamic range!

The DPA ST2011A Stereo Microphone Kit exhibits a previously unheard blend of clarity, richness and dynamic range. The off-axis response is linear but in a smaller frequency bandwidth. This makes stage separation and gain-to-feedback higher. The mic level is easier to control. The foam design in the heavy-duty transportation box allows for fast and easy exchange of the microphone/accessory inlays. The included mics make several stereo principles like XY and ORTF easy to obtain. The DPA ST2011A Stereo Microphone Kit contains two mics, windscreens and clips all packaged in a Peli Case.

DPA ST2011A Stereo Microphone Kit Features

  • Matched pair of DPA 2011A Microphones
  • Selected on sensitivity within +/- 1.5dB
  • Use for stereo miking techniques
  • Superb stage separation and level control
  • All-round workhorses
  • Peli Case transportation and protection

DPA ST2011A Stereo Microphone Kit Specifications

  • Directional Pattern: Cardioid
  • Principle of Operation: Pressure Gradient, with Interference Tube
  • Cartridge Type: Pre-polarized Condenser, Twin Diaphragm Capsule
  • Frequency Response: 20 Hz - 20 kHz
  • Effective Frequency Range, ±2 dB, at 30 cm (11.8 in): 50 Hz - 17 kHz with 3 dB Soft Boost at 12 kHz
  • Sensitivity, Nominal, ±2 dB at 1 kHz: 10 mV/Pa; -40 dB re. 1 V/Pa
  • Equivalent Noise Level, A-weighted: Typ. 20 dB(A) re. 20 µPa (max. 23 dB(A))
  • Equivalent Noise Level, ITU-R BS.468-4: Typ. 33 dB (max. 36 dB)
  • Distortion, THD < 1%: 134 dB SPL RMS, 137 dB SPL Peak
  • Dynamic Range: Typ. 117 dB
  • Max. SPL, THD 10%: 153 dB SPL Peak
  • Switchable Attenuator, Filters etc.: 0 dB / -20 dB
  • Rated Output Impedance: 200 O
  • Minimum Load Impedance: 2 kO
  • Cable Drive Capability: 100 m (328 ft)
  • Output Balance Principle: Impedance Balancing with Active Drive
  • Common Mode Rejection Ratio (CMRR): > 60 dB
  • Power Supply (for Full Performance): P48 (Phantom Power)
  • Current Consumption: 2.8 mA
  • Connector: XLR-3M. Pin 1: Shield, Pin 2: Signal + Phase, Pin 3: - Phase
  • Color: Matte Black
  • Weight: 164 g (5.8 oz)
  • Microphone Diameter: 19 mm (0.75 in)
  • Microphone Length: 198 mm (7.8 in)
  • Maximum Output Voltage, RMS: > 5 V
  • Polarity: +V at Pin 2 for Positive Sound Pressure
  • Temperature Range: -40°C to 45°C (-40°F to 113°F)
  • Relative Humidity (RH): Up to 90%
  • Sensitivity Selection Tolerance (at 1 kHz): ±1.5 dB

DPA ST2011A Stereo Microphone Kit Includes

  • 2 x DPA 2011A Twin Diaphragm Cardioid Microphones
  • 2 x Microphone Holders
  • 2 x Windscreens
  • 1 x Peli Case
  • 1 Year Warranty

No review yet, Be first to Write a Review