Audio Technica AT4041SP Studio Microphone Pack

Audio Technica

(No reviews yet) Write a Review
Product Code: 9999-02045
$549.00
Adding to cart… The item has been added
We Need A Few Days

This item must be ordered in from the manufacturer. Give us a few days to get it here and heading your way. Go ahead and place your order and we will let you know as soon as it ships. If you have a deadline then please contact us before placing the order so we can meet your expectations.

Got Questions? Need Support?

888-228-4530 Contact Us!

The Audio Technica AT4041SP Studio Microphone Pack offers two AT4041 studio condenser microphones, engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound. With low-mass diaphragm, transformerless circuitry and state-of-the-art design, this pair is ideal for drum overheads, acoustic guitar, piano, horns and under snare.

The Audio Technica AT4041SP Studio Microphone Pack combines two AT4041 Microphones, a unique combination of audio excellence and moderate cost. The Audio Technica AT4041 features a smooth, extended frequency response with a slight rise in the high-frequency region and a transformerless output for very high SPL-handling capability. The element back plate holds a fixed charge and has been aged to provide energy stabilization. The surface of the back plate is precision milled to ensure maximum charge linearity, resulting in a reduction in both frequency response peaks and diaphragm break-up distortion.

Audio Technica AT4041SP Studio Microphone Pack Features

  • Smooth, extended frequency response with a slight rise occurring in the high-frequency region
  • Ideal for drum overheads, acoustic guitar, piano, horns and under snare
  • Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • State-of-the-art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
  • Switchable hi-pass filter and rugged turned-brass microphone housing

Audio Technica AT4041SP Studio Microphone Pack Specifications

  • Element: Fixed-Charge Back Plate, Permanently Polarized Condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 20-20,000 Hz
  • Low Frequency Roll-Off: 80 Hz, 12 dB/Octave
  • Open Circuit Sensitivity: -36 dB (15.8 mV), re 1V at 1 Pa
  • Impedance: 100 Ohms
  • Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% THD
  • Dynamic Range (Typical): 121 dB, 1 kHz at Max SPL
  • Signal-To-Noise Ratio: 70 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 48V DC, 3.2 mA Typical
  • Switch: Flat, Roll-Off
  • Weight: 4.2 oz (120 g)
  • Dimensions: 6.28" (159.5 mm) Long, 0.83" (21.0 mm) Body Diameter
  • Output Connector: Integral 3-Pin XLRM-Type
  • Audio-Technica Case Style: S1

Audio Technica AT4041SP Studio Microphone Pack Includes

  • 2 x Audio Technica AT4041 Studio Microphones
  • 2 x Audio Technica AT8405a Stand Clamp for 5/8"-27 Threaded Stands
  • 2 x Audio Technica AT8159 Windscreen
  • 1 x Protective Wooden Storage Case
  • 2 Year Warranty

No review yet, Be first to Write a Review