ART T8 Hum Eliminator

ART

(No reviews yet) Write a Review
Product Code: 7558
$179.99
Adding to cart… The item has been added
We Need A Few Days

This item must be ordered in from the manufacturer. Give us a few days to get it here and heading your way. Go ahead and place your order and we will let you know as soon as it ships. If you have a deadline then please contact us before placing the order so we can meet your expectations.

Got Questions? Need Support?

888-228-4530 Contact Us!

The ART T8 Hum Eliminator is a high quality totally passive audio interface that uses 8 transformers to separate input and output signal grounds, thereby isolating two systems and reducing hum and ground-loop noise.

The ART T8 Hum Eliminator's audio transformers have flat and wide frequency response and handle high signal levels while maintaining an isolated balanced output. This gives the ART T8 a very clean and neutral sound with a wide variety of signal sources. The transformers are wound for 1:1 unity gain and are designed to be used with impedances from 600 Ohms to 100k Ohms.

Connection versatility sets the ART T8 apart from other isolation boxes. The ART T8 provides balanced XLR, 1/4" phone, and RCA type phono connections on all inputs and outputs simultaneously. The ART T8 fits easily into virtually any audio system and is a clean patch point between all types of systems.

The ART T8s mounting ears are reversible so you can have either the XLRs on the front or the 1/4" and RCA phono jacks on the front. This maximizes flexibility in cabling your system. Whether you need an interface between a computer based audio workstation and your monitor system, isolation on long cable runs in a fixed installation, isolation of multiple signal sources from your recording equipment, or in many cases, just a safer connection between two audio systems, the ART T8 can accommodate.

It's full feature set, rugged construction, and high-end specifications make the ART T8 the obvious choice for Live Sound, Permanent/Fixed Install, D.J., and virtually any PA application.

ART T8 Hum Eliminator Features

  • High-quality, passive audio interface
  • 8 High performance transformers
  • XLR, 1/4" phone, and RCA type phono connections on all inputs and outputs.
  • Reversible rack mount ears
  • Separate input and output signal grounds reduce hum
  • Audio transformers have an extremely flat and wide frequency response
  • Very clean and neutral sound with a wide variety of signal sources
  • Can be used for signal taps or as a signal splitter
  • Use as a safer connection between two audio systems (ie: Computer workstation or monitor system)
  • 19" 1U black all steel case

ART T8 Hum Eliminator Specifications

  • Input Connections: XLR female balanced, 1/4-inch TRS balanced, and RCA type phono jacks
  • Output Connection: XLR male balanced, 1/4-inch TRS balanced, and RCA type phono jacks
  • Frequency Response: 10Hz - 50kHz, +/-0.5dB @ +4dBu
  • THD: 0.01% Typical @ 1kHz, +18dBu, <0.1% @ 100Hz, +24dBu Ref: 0dBu = 0.775VRMS
  • Channel Separation: 90dB typical
  • CMRR: 60dB typical
  • Phase Error: Less than 5%, 20Hz - 20kHz
  • Insertion Loss: 0.4dB @ 100kOhm Load, 5.5dB @ 600 ohm Load
  • Power Requirements: Totally Passive
  • Dimensions: 1.75"H x 19"W x 3.75"D (44.5mm x 482.6mm x 95mm)
  • Weight: 3.75 lbs. (1.7kg)

ART T8 Hum Eliminator Includes

  • T8 Hum Eliminator
  • 3 Year Warranty

No review yet, Be first to Write a Review