Home > Rack Gear >

dbx FCS-960 Graphic Equalizer

dbx FCS-960
dbx FCS-960
 
Alternative Views:


List Price: $1,899.00
Our Price: $1,799.00


Availability: Usually Ships in 24 Hours
Product Code: 9999-14457

 

dbx FCS-960 Graphic Equalizer

The dbx FCS-960 Graphic Equalizer is a 30-band graphic equalizer featuring Dual Mode switching between Normal and Fine filter width settings on each channel. With constant Q-filters having filter-bypass centre taps, sweepable/switchable Hi-pass filter, Gain control and electronic balanced inputs and outputs, the FCS-960 can be used as a stereo pair.

The FCS-960 provides two channels in 3U of rack space. Constant Q-filters with filter-bypass centre taps are controlled by high grade, 45mm faders with moulded polymer fader knobs which eliminate visual parallax error even under low light conditions.

Also included are sweepable/switchable Hi-pass filter, Gain control and electronic balanced inputs and outputs.

The graphic equaliser shall have two channels each having thirty boost/cut faders to control filters at standard third-octave isocentre frequencies from 25Hz to 20kHZ. Each fader shall have a 45 mm travel with a mechanical centre detent and electrical centre tap which removes its filter from the signal path at the zero fader setting. A Mode switch on each channel shall allow its filters to be configured with a Normal Q-factor or Fine Q-factor. In both Modes, the Q-factor of each filter shall be constant for any fader level setting.

Each channel shall have a Hi-Pass filter (18dB/Oct) variable between 20Hz-25OHz with independent bypass switch, Output Gain trim with LED Clip indicator and an EQ IN/OUT switch which defaults to a passive relay bypass in OUT mode. The relay bypass shall also operate automatically in case of power failure.

System performance shall meet or exceed the following specifications: THD @ +4dBu <0.005%; 20-20kHz faders flat; Output Noise <-90dBu 22 -22kHz faders flat. Maximum boost/cut shall be nominally +/- 10dB.

Inputs shall be electronically balanced (transformers optional), outputs shall be electronically balanced and floating (transformers optional). A Tamperproof Security Cover shall be available as an option. The graphic equaliser shall be 3U (5 1/4"), 19" rackmount and capable of operating from a 90-120V or 190-250V AC power source.

The graphic equaliser shall be the dbx FCS-960.

dbx FCS-960 Graphic Equalizer Features

  • Long 45mm fader travel for precise adjustment and control
  • Centre detented fader with electrical centre tap for true 0dB setting.
  • Advanced constant Q filter topology for improved accuracy at all
  • fader settings and excellent sonic transparency. Selectable normal or
  • fine filter response
  • Continuously variable high pass filter, with by-pass switch
  • Gain control for system loudness normalisation
  • Peak clip LED to give advance warning of signal overload
  • Channel bypass selection and power fail bypass by relays
  • Electronically balanced inputs and outputs
  • Proprietary design fader knob provides positive feel with ample finger
  • room, virtually eliminates visual parallax errors even under low
  • ambient light conditions
  • Optional internal input and output transformer balancing

dbx FCS-960 Graphic Equalizer Specifications

  • Chassis: 3U rack spaces
  • Equalizer EQ Bands: 30 per channel (60 total)
  • Input Connectors: XLR, TRS, Combi-con (2 each)
  • Output Connectors: XLR, TRS, Combi-con (2 each)
  • Gain EQ: +/- 15 dB per band, inf to +10 dB overall
  • High-Pass Filter: Sweepable, flat to 250 Hz
  • Input Impedance: 10 killo ohm balanced or unbalanced
  • Headroom Input: >20 dBu
  • Max. Output Level: 21 dBu into 600 ohm or greater
  • Output Impedance: 50 ohm unbalanced or unbalanced
  • Frequency Response: <5 Hz to >45 kHz +/-1 dB
  • Noise: < -94 dBu 22 Hz to 22 kHz
  • Dynamic Range: >115 dB
  • Crosstalk: <-80 dB at 1 kHz
  • Distortion: <0.005% THD (80 kHz measurement BW) 20 Hz to 20 kHz, 0 dBu
  • Gain Control: 10 dB to infinity
  • HP Filter Control: OUT to 250 Hz at 12 dB / octave
  • LF Contour: +/-6dB shelving at 50Hz 6dB/octave
  • HF Contour: +/-6dB shelving at 14kHz 6dB/octave
  • Frequency Bands: +/- 15dB on ISO centres with a Q of 4
  • Power: 115V switch position (90V to 132V), 230V switch position (190V to 132V)

dbx FCS-960 Graphic Equalizer Includes

  • dbx FCS-960 Graphic EQ Unit
  • Power Cable
  • Printed Operation Manual
  • Warranty Registration Card

dbx FCS-960 Graphic Equalizer Downloads

Click here to view all dbx products