Home > Recording > Direct Boxes > Active >

  Tech 21 SansAmp RPM Instrument Preamp w/ Parametric EQ

Tech 21 RPM
Tech 21 RPM
 
List Price: $435.00
Our Price: $329.00


Availability: Usually Ships in 24 Hours
Product Code: 9999-09438

 

Tech 21 SansAmp RPM Instrument Preamp w/ Parametric EQ

Tech 21 SansAmp RPM Instrument Preamp w/ Parametric EQ, a versatile instrument pre-amp with parametric equalization and SansAmp technology!

Tech 21 SansAmp RPM Instrument Preamp w/ Parametric EQ Details

The Tech 21 SansAmp RPM is a versatile instrument pre-amp with parametric equalization and SansAmp technology. This single space rackmount model was adapted from the Tech 21 SansAmp Acoustic DI pedal, with the addition of a Drive control, and redesigned as an expanded multi-instrument tool. With a sweepable, semi-parametric EQ and variable gain, the SansAmp RPM is a supercharged tone shaper for any signal source. Partner it with a SansAmp RBI for the ultimate bass pre-amp system, or with a SansAmp PSA for total domination.

Tech 21 SansAmp RPM Instrument Preamp w/ Parametric EQ Features

  • Drive adjusts the overall amount of gain and overdrive.
  • Active Bass and Treble controls cut or boost ±12dB
  • Mid Shift is a parametric EQ control which allows you to select the center frequency of the Mid control. Its sweep ranges from 170 Hz to 3.0 kHz. This, then, enables you to notch out any specific frequencies that may be causing your instrument to feed back.
  • Mid is also an active tone control, cut or boost ±12dB.
  • Blend allows you to mix the direct instrument signal with SansAmp Tube Amplifier Emulation circuitry.
  • Individual Level control for the XLR out to optimize your amp's output relative to the P.A. system.
  • Effects Loop with Mix 50/50 switch to configure in series or parallel.
  • 1/4" rear input and XLR output with selectable levels.
  • Buffered uneffected XLR output to run a dry signal to a separate channel.
  • Footswitch input to engage unit. [Utilizes any alternating (on/off) footswitch.]
  • Footswitch output to chain and toggle between another SansAmp RPM or SansAmp RBI.

Tech 21 SansAmp RPM Instrument Preamp w/ Parametric EQ Specifications

  • Input Impedance-Input 1: 4.7MOhm
  • Input Impedance-Input 2: 1MOhm
  • Output Impedance-1/4?: 1KOhm min
  • Output Impedance-XLR: 600 Ohms min
  • Input Level-Input 1: 1V RMS max
  • Input Level-Input 2: 1V RMS or 10V max, with -20dB pad engaged
  • Output Level-XLR: Switchable to -20dB or 0dB range
  • Maximum Output Level: +10dB or better
  • Effects Loop Send: 1K Ohm min, -20dB
  • Effects Loop Return: 100K Ohm min, -20dB
  • Low Frequency Response: 10Hz or better
  • High Frequency Response: Harmonic content, 20kHz or better
  • Maximum Power Consumption: 5 Watts
  • AC Input Power (factory set): 100V, 117V, 230V, 240V
  • Cycles: 50/60 Hz - NOTE: Each unit constructed for specific voltages. AC power cannot be switched.
  • Enclosure: Aluminum and steel, fully shielded
  • Dimensions: 19.0"w x 1.75"h x 5.25"d / Overall depth: 6.25"
  • Weight: 5 lbs.

Tech 21 SansAmp RPM Instrument Preamp w/ Parametric EQ Downloads

Click here to view all Tech 21 products


Average Customer Review 3 of 5 Total Reviews: 1

| Write a review!


  0 of 0 people found the following review helpful:
 
Cool Old School Sound April 11, 2016
Reviewer: Jason W from Greenwood, IN United States  
Rackmount version of the RPM pedal. I've owned just about all of Tech 21's bass pedals over the years. They all sound good, but they definitely impose that sound on your signal no matter what type of bass you're playing. Lots of in/out options on this unit and you can even chain them together to have multiple channels. If you like the Ampeg sound you'll like this.

Was this review helpful to you?