Ellipse 10

A fully time-aligned, 3-way active system utilising Dual Concentric™ plus SuperTweeter™ drive units, the Ellipse 10 has a frequency response extending to above 50kHz for monitoring of wideband programme material.

Features

• A fully time-aligned, 3-way active system utilising Dual Concentric™ plus SuperTweeter™ drive units, the Ellipse 10 has a frequency response extending to above 50kHz for monitoring of wideband programme material.
• Ninety degree horizontal dispersion gives you a wide sweet spot for practical working across the console, while analogue signal processing achieves an exceptionally flat frequency response in use.
• Discrete MOSFET power amplifiers, with generous power supply, provide more than ample power with extremely low noise and distortion.
• The unique cabinet shape not only has a striking appearance but is inherently stiff. Constructed of laminated birch with a massive MDF baffle and rear panel, the enclosure is non-resonant acoustically and mechanically.

Specifications

• Frequency response: 30Hz - 50kHz
• Maximum SPL: (pair @ 1m) 114dB (anechoic)
• Typical max SPL (pair @ mix position): 118dB
• Distortion: <0.5%
• Driver type: 254mm (10") Tannoy Dual Concentric˘â
• SuperTweeter: 25mm (1") Wideband SuperTweeter
• Dispersion: 90 degrees horizontal (@6dB)
• Amplifier Inputs: 22k§Ů balanced via XLR
• Input sensitivity: +4dBu to -10dBu continuous
• Power rating: LF: 200W, HF: 200W, ST: 30W
• Signal/Noise Ratio: >100dB
• Multi-function LED indicator: Green for: System on, Red for: Stabilisation pior to system on. Fault (such as DC), thermal trip, clipping of LF amplifier, Yellow for: VLF warning (presence of subsonic signals below 20Hz, increasing in sensitivity down to 1Hz)
• Trim Controls: Hi: Shelving filter +/-3dB @ 25kHz (+/-1dB @ 4.5kHz), Mid: Bell filter +/-2dB @ 1.4kHz - 0.45Q, Low: Variable alignment LF hi-pass filter +/-3dB @ 45 Hz (+/-1dB @ 90Hz)
• CROSSOVER Frequency: 1.7 kHz - 14 kHz
• CONSTRUCTION
  Enclosure type: Laminated birch, reflex ported
• Volume: 32.6 Litres
• Dimensions: 423mm x 540mm x 380mm (16 5/8 x 21 1/4 x 15")
• Mains voltage: 100 - 120 V / 220 - 240 V 50 - 60 Hz
• Mains fuse: T2.5A 250 V, T5.0A 125 V
• Weight: 21kg (46.2lbs)
• Finish: Grey suede paint (black on SuperTweeter)
• Front baffle: panel MDF