| Steinberg MR816X FireWire Audio Interface Details
The Steinberg MR816 X is an innovative 16-in/16-out FireWire interface, though it delivers much more than just I/O. This next-generation device boasts onboard DSP reverb alongside advanced Cubase integration technologies, making it a superb choice for project studios, professional studios, and mobile recording rigs alike. With the Steinberg MR816 X, you get eight newly developed Class A "D-Pre" XLR/TRS combo preamplifiers alongside professional must-haves, such as ADAT I/O, word clock I/O, and S/PDIF I/O. If you're working within Cubase - or any other DAW - you'll find exceptional value with the Steinberg MR816 X.
Eight Class A "D-Pre" microphone preamplifiers with XLR/TRS jacks
Steinberg's engineers teamed with Yamaha engineers to design the MR816 X. One chief focus was the getting the microphone preamplifiers just right. The result is the Class A "D-Pre" design, featuring advanced, inverted Darlington circuits, for an exceptionally smooth and detailed performance. The Steinberg MR816 X features eight of these microphone preamplifiers, giving you plenty of inputs to mike an entire band at once. What's more, each channel features an XLR/TRS combo jack, so you can easily track line-level gear alongside your microphones. There's even a hi-Z switch on the front-panel for running a guitar or bass in direct.
Individually selectable phantom power and a -26dB pad
While having eight microphone preamplifiers is great on its own, one frustration with many interfaces is that they lack selectable phantom power and pads on each channel. And if you're running a combination ribbons alongside condensers, for example, this is extremely troublesome. Fortunately, the Steinberg MR816 X lets you choose when you engage phantom power and/or the pad on each channel, so you don't have to mess with pairing "like" microphones together.
Professional I/O, including ADAT, S/PDIF, and word clock
The Steinberg MR816 X offers more than just the standard analog I/O - it's ready to streamline the channels from all your outboard gear into just one FireWire connection. Onboard there are ADAT I/O and S/PDIF I/O for your digital gear. There's also an extra FireWire port for daisy-chaining more MR816 X units together or tacking on a hard drive. In addition, word clock I/O is onboard, so you can professionally synchronize your entire system together to an external clock.
DSP-powered reverb for tracking and as a plug-in for mixing and mastering
Beyond essential I/O, the Steinberg MR816 X offers powerful DSP-powered reverb for your tracking, mixing, and mastering needs. The onboard DSP chip can one run instance of the premium REV-X reverb - the same complex reverb algorithm developed by Yamaha and found on their premier digital consoles. You'll enjoy rich, high-density Hall, Room, and Plate effects to sweeten an artist's headphone mix. Reverb Time and Level are both conveniently adjustable either through Cubase or via the MR-816 X's front panel. You can also use the REV-X reverb as a VST plug-in during mixdown.
Advanced Cubase integration features, including Quick Connect
To start, Cubase automatically detects any connected MR816 X interfaces the moment you boot up the software, letting you get straight into the creative part of the project, rather than configuring your system. But the MR816 X takes Cubase integration a step further. You can instantly route and reroute inputs to Cubase channels on the fly - straight from the front panel of the MR816 X. All you have to do is select a track, then press a channel button on the I/O front panel - that channel will be routed to that track. When you select different tracks, you'll see a front-panel light flash to show you which channel is linked to that track. A host of presets with routing and I/O configurations are included as well, making set up simple. Plus, you can dive straight into a new session by just selecting a track and pushing the desired channel on the front. Not only will input route to that track, but Cubase will set up either a mono or stereo bus, as desired.
Eight TRS outputs as well as inserts for patching in your outboard gear
The Steinberg MR816 X gives you plenty of outputs. Feed a 5.1 system or just a couple sets on your desktop - or route audio in Cubase and send a few of the eight TRS outputs to a headphone amplifier system, for creating complex monitor mixes. There are also two TRS inserts for patching in any of your favorite outboard gear.
Can stack three MR816 X systems for 48-in/48-out plus more DSP
The MR816 X is seamlessly scalable, making it easy to create the perfect configuration of preamplifiers and DSP capability - and all on just one FireWire port. You can daisy-chain up to three MR816 X units together, for up to 48 input and output channels. Cubase will recognize all of the available I/O - and the DSP REV-X reverb functions are available for each device. With the system maxed out to 48 inputs and outputs, you can use all three of the REV-X reverb plug-ins for serious sonic flexibility and horsepower during mix-down.
Includes Cubase AI4 recording software
Get started making music just as soon as you pull your Steinberg MR816 X out of the box. You get powerful Cubase AI4 software included, for up to 48 audio tracks and up to 64 MIDI tracks. It's based on professional Cubase 4 software and even uses the Cubase 4 audio engine. Cubase AI4 also comes with 25 VST effects, 15 VST3 plug-ins, and 480 drum loops. It's an excellent way to step into the production power of Cubase.
Steinberg MR816X FireWire Audio Interface Features
Steinberg MR816X FireWire Audio Interface System Requirements
The minimum system requirements state the minimal specification your computer must have to be able to use the software. A more powerful system may be required for certain tasks or larger projects. You can find more information about computer system specification and setup here.
MAC
-
Mac OS X version 10.4* or 10.5x
-
Power Mac G4 1 GHz or Intel Core Solo 1.5 GHz
-
512 MB RAM
-
DVD drive required for installation
-
FireWire port required for connection of MR unit
-
* Intel-based Mac computers require version 10.4.9 or higher
Cubase AI 4.5
-
Mac OS X version 10.4 or 10.5x
-
Power Mac G4 1 GHz or Intel Core Solo 1.5 GHz
-
512 MB RAM
-
Display resolution 1280 x 800 pixels
-
DVD drive required for installation
-
Internet connection required for license activation
PC
-
Windows XP Professional (SP2), XP Home Edition (SP2) or Vista (32-bit and 64-bit)
-
Intel/AMD processor 1.4 GHz*
-
512 MB RAM
-
DVD drive required for installation
-
FireWire port required for connection of MR unit
* 64-bit editions of Windows Vista require Core 2 Duo 1.66 GHz or higher and 1GB RAM or more.
Cubase AI 4.5
-
Windows XP Professional (SP2), XP Home Edition (SP2) or Vista (32-bit)
-
Intel/AMD processor 1.4 GHz
-
512 MB RAM
-
Display resolution 1280 x 800 pixels
-
DVD drive required for installation
-
Internet connection required for license activation |
this things rocks 
