Home > Rack Gear > EQs > Accessories >

  Speck Electronics ASC DC Interface Cable

Speck Electronics DC Interface Cable
Speck Electronics DC Interface Cable
 
List Price: $26.00
Our Price: $26.00


Availability: Usually Ships in 24 Hours
Product Code: 9999-11729

 

Speck Electronics ASC DC Interface Cable

Speck Electronics DC Interface Cable

Speck Electronics DC Interface Cable
The Speck Electronics DC Interface Cable is an optional interface cable that may be used to supply DC power to a second ASC Equalizer. Using this cable will eliminate the need for two power modules. If this optional cable is used, only ONE power module is required to power two ASC's. Please note, you cannot jump a MicPre 5.0 to another MicPre 5.0 as these are AC units and require their own dedicated power supply.

Speck Electronics DC Interface Cable Installation

  1. If you have (2) ASC equalizers, then you have (2) ASC power modules. Take one of the power modules and put it away you don't need it. You only require one power module for this installation.
  2. Connect one end of the gray DC interface to the connection marked AUX DC I/O on ASC #1. This plug and respective connector are keyed so they will fit in only one direction.
  3. Connect the other end of the gray DC interface cable to the connection marked AUX DC I/O on ASC #2. This plug and respective connector are keyed so they will fit in only one direction.
  4. Connect the power module to the POWER connection on only ONE of the ASC's. ASC #1 will power ASC #2 by way of this interface cable.