Details

The Shure SM86 is a unidirectional (cardioid) condenser vocal microphone for professional use in live performance. An extremely rugged microphone, the SM86 withstands the rigors of touring while delivering studio-quality sound. The tailored frequency response of the SM86 reproduces vocals with clarity. A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The built-in three-point shock mount minimizes handling noise, and a two-stage pop filter reduces wind and breath "pop" noise. The SM86 is an excellent selection for use with both stage monitors and personal in-ear monitors.

Specifications

• Transducer Type: Condenser (electret bias)
• Polar Pattern: Cardioid
• Frequency Response: 50 to 18,000 Hz
• Output Impedance: 150 Ohms at 1 kHz Recommended minimum load impedance: 600 Ohms
• Sensitivity (at 1,000 Hz): Open Circuit Voltage –50 dBV/Pa (3.15 mV)(1 Pa = 94 dB SPL)
• Output Clipping Level: 1000 Ohm Load at 1,000 Hz +3 dBV (1.41 V)
• Maximum SPL (at 1,000 Hz): 1000 load (1% THD) 147 dB
• Self-Noise: 23 dB typical, A-weighted
• Dynamic Range (1000): 124 dB (maximum SPL to A-weighted noise level)
• Signal-to-Noise Ratio: 71 dB at 94 dB SPL (IEC 651)**S/N ratio is difference between 94 dB SPL and equivalent SPL of self–noise A-weighted.
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector.
• Power:
  • Phantom Supply Requirement 11 to 52 Vdc, positive at both pins 2 and 3
  • Current Drain 5.2 mA
• Connector: Three–pin (XLR) professional audio
• Case: Dark gray enamel-painted steel with matte-finished silver colored steel grille
• Net Weight: 278 grams (9.8 oz)
• Environmental Conditions:
  • Operating: –18° to 60° C (0° to 135° F) (relative humidity <90%)
  • Storage: –29° to 74° C (–20° to 165° F) (relative humidity <80%)

Features

• Condenser cartridge for studio quality sound
• Tailored frequency response for a clear reproduction of vocals
• Rugged construction withstands the rigors of touring sound
• Cardioid polar pattern minimizes unwanted background noise
• Excellent choice for stage monitors and personal in-ear monitors
• Built-in three-point shock mount minimizes handling noise
• Two-stage "pop" filter reduces wind and breath noise

Applications

• Lead Vocals
• Backup Vocals

Other Information

Manual