Home > Live Sound > Mixers > Line Mixers >

  Shure SCM810 Eight-Channel Automatic Mixer

Shure SCM810
Shure SCM810
 
List Price: $1,575.00
Our Price: $1,365.00


Availability: Usually Ships in 24 Hours
Product Code: 9999-03939

 

Shure SCM810 Eight-Channel Automatic Mixer

Shure SCM810 Eight-Channel Automatic Mixer

SCM810 8-Channel Microphone Mixer Details

This eight-channel automatic mixer features the Shure patented IntelliMix, which activates only microphones being addressed, minimizing poor audio caused by multiple open microphones. The SCM810 is designed specifically for installed sound applications.

Features include adjustable EQ per channel, 48 V phantom power, active balanced microphone - or line-level inputs, line-level outputs, highly RF resistant chassis and circuitry, complete logic control of microphone activation, linking capacity for up to 400 microphones, with an internal power supply. 120/230 Vac power.

SCM810 8-Channel Microphone Mixer Features 
  • Eight balanced mic-line input channels (Phoenix block connectors)
  • One unbalanced 1/4" aux level input
  • Eight unbalanced 1/4" direct line level outputs
  • One balanced master line level output (Phoenix block connector)
  • Selectable 48V phantom power per channel
  • Level selectable peak output limiter
  • Full rack width (single rack height)

SCM810 8-Channel Microphone Mixer Specifications
 
  • Total Harmonic Distortion <0.1% at +18 dBV output level, 50 Hz to 20 kHz (through 20 Hz-20 kHz filter; Input 1 and Master at 5, all other controls full counterclockwise) 
  • Hum and Noise Equivalent Input Noise: -125 dBV (150 ohm source; through 400 Hz - 20 kHz filter)
  • Equivalent Input Hum and Noise: -123 dBV (150 ohm source; through 20 Hz - 20 kHz filter)
  • Output Hum and Noise (through 20 Hz to 20 kHz filter; channel controls full counterclockwise))
  • Master full counterclockwise: -90 dBV
  • Master full clockwise: -70 dBV 
  • Common Mode Rejection >70 dB at 1 kHz 
  • Polarity Mic/Line, Send inputs to all outputs are non-inverting; Aux input to all outputs is inverting
  • Input Channel Activation Attack Time: 4 ms
  • Hold Time: 0.4 s (switchable to 1.0 s)
  • Decay Time: 0.5 s 
  • Off-Attenuation 15 dB (switchable to infinity)
  • Overload and Shorting Protection Shorting outputs, even for prolonged periods, causes no damage. Microphone inputs are not damaged by signals up to 3 V; Line and Monitor inputs by signals up to 20 V 
  • Equalization Low-frequency: 6 dB/octave cut, adjustable corner from 25 to 320 Hz
  • High-frequency: +/- 6 dB at 5 kHz, +/- 8 dB at 10 kHz, shelving 
  • Limiter Type: Peak
  • Threshold: Switchable: off, +4, +8, +16 (dBm at output)
  • Attack Time: 2 ms
  • Recovery Time: 300 ms
  • Indicator: Lights red when limiting occurs 
  • Input LEDs Green on channel activation, red at 6 dB below clipping 
  • Phantom Power 46 Vdc open-circuit through 6.8 k series resistance per DIN 45 596
  • Operating Voltage SCM810: 120 Vac rated nominal (see Voltage Selection for 230 Vac operation in User Guide), 50/60 Hz, 200 mA SCM810E: 230 Vac rated nominal (see Voltage Selection in User Guide for 120 Vac operation), 50/60 Hz, 100 mA 
  • Temperature Range Operating: 0 degrees to 60 degrees C (32 degrees to 140 degrees F) Storage: -30 degrees to 70 degrees C (-20 degrees to 165 degrees F) 
  • Overall Dimensions 44.5 mm H x 483 mm W x 317 mm D (13/4 x 19 x 121/2 inches) 
  • Net Weight 4.3 kg (9 lb 9 oz)

 

Click Here to View All Shure Products