Home > Live Sound > Mixers > Line Mixers >

  Shure FP33 Stereo Mic/Line Mixer

Shure FP33
Shure FP33
List Price: $1,714.00
Our Price: $1,485.00

Availability: Usually Ships in 24 Hours
Product Code: 9999-12378


Shure FP33 Stereo Mic/Line Mixer

Shure FP33 Stereo Mic/Line Mixer

Shure FP33 Stereo Mic/Line Mixer Details

Shure FP33 Stereo Mic/Line Mixer is a 3-input, 2 output, portable stereo mixer specifically designed for remote audio recording, electronic field production, electronic news gathering, and location film production.

Shure FP33 Stereo Mic/Line Mixer features include: High-quality, sealed input potentiometers, Dynamic range of over 100dB 48V phantom, 12V phantom power, and 12V T (A-B) power, LED indicators of input levels, output peaks, limiter action, and low battery. Pop-up pan pots and a link switch to couple inputs 2&3 into a stereo pair, Mix Bus to connect an additional FP33 or FP32A, comprehensive headphone monitoring control including headphone MS stereo matrix, internal DIP switches for over 4,000 customized setups.

Shure FP33 Stereo Mic/Line Mixer has an exceptionally low self-noise and a wide dynamic range that are perfect for use with DAT and other digital recording media.

Shure FP33 Stereo Mic/Line Mixer Features

  • Exceptionally quiet design, suitable for use with DAT and other digital formats
  • Extended frequency response of 20 Hz?"20 kHz
  • Dynamic range greater than 100 dB
  • Transformer balanced inputs and outputs for superior rejection of RFI and electromagnetic hum
  • Three selectable mic/line inputs
  • Two selectable mic/line outputs
  • Wide range input gain controls handle hot signal levels without attenuators
  • 48 V phantom, 12 V phantom, and 12 V T (A-B) microphone power
  • Pop-up pan pots
  • Link switch gangs inputs 2 and 3 to control a stereo microphone
  • Switchable low-cut filters on each input
  • Bi-color LED signal presence and peak indicator for each input
  • Professional VU meters with selectable timed or toggled backlighting
  • Dual clutched Master gain control for simultaneous or separate adjustment of output levels
  • Bi-color LED limiter and peak indicator for each output
  • Two linkable output peak limiters with adjustable thresholds and release times
  • Slate microphone and slate tone with selectable functions
  • Isolated two-way talk-back using Monitor In and modified Slate Mic/Tape Out jack
  • High tolerance 3.5 mm jacks for stereo Tape Out and Monitor In
  • 1 kHz tone oscillator
  • Mix bus jack and cable to link FP33 or FP32A mixers
  • Headphone monitor mode switch to select L, L+R (Mono), R, or Stereo
  • Internal headphone level adjustments to balance post?"master audio levels and Monitor In levels at the headphone output
  • Selectable M/S decoding circuit for headphone monitor
  • Mixer/Monitor In switch (locking and momentary)
  • Internal Monitor defeat switch for split-feed headphone operation
  • Headphone volume control
  • 1/4 in. and 3.5 mm jacks for stereo headphone outputs
  • Customized operation via internal DIP switches, trim pots, slide switches, and optional jumpers
  • Regulated voltage rails (±15 Vdc) provide exceptional headroom
  • Bi-color power On/Off LED
  • Battery check switch and low battery warning LED
  • Non-polarized external power jack
  • External power operating range of 12 to 30 Vdc
  • Soft-touch, color coded control knobs with raised position indicators
  • Metal XLR input and output connectors
  • Rugged, plated metal chassis
  • Operates for 8 hours on two 9 V alkaline batteries
  • Includes carrying case, shoulder strap, and mix bus cable

Shure FP33 Stereo Mic/Line Mixer Specifications

  • Manufacturer: Shure
  • Product: FP33 Stereo Mic/Line Mixer
  • Frequency Response: 20 to 20,000 Hz r2.0 dB
  • Total Harmonic Distortion: 0.25% THD at +4 dBm output, 50 to 20,000 Hz
  • Equivalent Input Noise: ?"127 dBV with 150 ohm source, 20 to 20,000 Hz
  • Output Noise: Master level fully CCW: d ?"100 dBV, 20 to 20,000 Hz, Master level fully CW: d ?"80 dBV, 20 to 20,000 Hz.
  • Common Mode Rejection Ratio: 65 dB at 100 Hz, ?"20 dBV input
  • Input Channel Bi-Color LEDs: Green: Signal presence; visual indication of mix level, Red: 6 dB below clipping level
  • Output Peak/Limiter Bi-Color LEDs: Green: Output being limited by 1 dB or more, Red: Output peak threshold
  • Output Clipping Level: Greater than or equal to -18 dBm at line output into 600 ohm
  • Low?"Cut Filters: 6 dB down at 150 Hz; 6 dB/octave slope
  • Pan Attenuation Level: 45 dB
  • Tone Oscillator: 1 kHz + -10%
  • Slate Tone Oscillator: 400 Hz + -10%
  • Overall Dimensions: (H x W x D) 58 mm x 184 mm x 161 mm (7?"1/4 x 6?"3/8 x 2?"1/4 in)
  • Net Weight: 1.6 kg (3.5 lbs) (without batteries)

Shure FP33 Stereo Mic/Line Mixer Downloads

Click here to view all Shure Products