| Sennheiser ME62/K6 Combo Omnidirectional Microphone System Details
The Sennheiser ME 62 is an omni-directional microphone capsule suitable for the Sennheiser K6 and the Sennheiser K6P powering modules. It can be used for reporting, discussions and interviews. The Sennheiser ME 62 is particularly suitable for good reproduction of "room" ambience and "spaced omni" stereo recording. Matte black, anodized, scratch-resistant finish.
The Sennheiser K6 powering module is the heart of this Sennheiser professional modular microphone system and can be powered either by its internal 'AA' size 1.5 V battery or by 12 - 48 V phantom power. The Sennheiser K6 can be combined with different condenser microphone heads to provide a wide variety of polar patterns. Matte black, anodised scratch-resistant finish.
Sennheiser ME62/K6 Combo Omnidirectional Microphone System Features
- Omni-directional pick-up pattern
- Minimal inherent self-noise
- Excellent rejection of rumble, wind and handling noise
- Wide frequency response
- High maximum sound pressure
-
Integral pop filter
Sennheiser K6 Omnidirectional Microphone System Specifications
- Frequency response 30 - 20,000 Hz ± 1 dB
- Transmission factor (1 kHz) 0 dB
- Nominal impedance 200 Ohms
- Terminating impedance 1000 Ohms
- Max. output voltage 2 V (at 1 kHz)
- Power supply phantom 12 - 48 V or 1.5 V battery
- Supply current 2 mA Battery life approx. 150 h
- Dimensions in mm 22 x 52 gross: 22 x 118
-
Weight approx. 30 g
Sennheiser ME62 Omnidirectional Microphone System Specifications
- Pick-up pattern omni-directional
- Frequency response 20 - 20,000 Hz ' 2.5 dB
- Sensitivity (free field, no load) (1 kHz) 31 mV/Pa ' 2.5 dB
- Nominal impedance 200 Ohms (with K6)
- Min. terminating impedance 1000 Ohms (with K6)
- Equivalent noise level A-weighted (DIN IEC 651) 15 dB CCIR-weighted (CCIR 468-3)27 dB
- Max. SPL (1kHz) 130 dB (THD= 1 %)
- Dimensions in mm 22.5 x 94
- Weight approx. 30 g
|
