Home > Microphones > Ribbon Microphones >

  Sandhill Audio 6011A Ribbon Microphone (Pair)
Sandhill Audio 6011A Pair
Sandhill Audio 6011A Pair
 
Alternative Views:


List Price: $6,950.00
Our Price: $4,850.00


Availability: Usually Ships in 24 Hours
Product Code: 9999-16283

 

Sandhill Audio 6011A Ribbon Microphone (Pair)

The Sandhill 6011A ribbon microphone is a versatile and very musical sounding microphone for live and project studio situations.

The Sandhill 6011A reacts in an exeptionally musical way to the sound pressure level variations. This feature is really useful in situations like recording loud singers, when typically the tone has a tendency to narrow as the sound level increases. The 6011A is an unbelievably level linear microphone. The Sandhill 6011A has a flat bass response without the low end emphasizes typical to most ribbon microphones. This is good for recording the kick drum, the upright or electric bass and the electric guitar. The great low end dynamic range makes the 6011A useable in all close-miking situations.

Strength

The mechanical structure of the 6011A consists of rigid precision machined aluminum and steel part assembly resulting a resonance free frame for the ribbon.

The ribbon element is electrically conductive composite material making it significantly stronger than traditional aluminum ribbons. This extra strength allows Sandhill to use only minimal screening around the ribbon without the fear of broken transducers. The microphone can handle unbelievably high sound pressure levels without any sign of distortion or physical damage. Sandhill 6011A's custom corrugated ribbon profile is designed to minimize the effect of standing wave modes on a ribbon element.

Active circuitry

The active circuitry of the Sandhill 6011A is designed to prevent the preamplifier from damping the ribbon. The circuit works as a very high constant load to the ribbon while providing a low output impedance that any preamp can handle. With active electronics, the ever critical transient response and low end frequency response are optimized. Using passive ribbon microphones with preamps that have a low input impedance is a gamble. Sandhill 6011A will work optimal with any preamp capable of delivering nominal gain and 48 Volt phantom power. The active circuit is featured with a switchable 6dB preattenuation to prevent electrical clipping with extremely loud sound sources ( >160dB peak) . The preattenuator can be activated from a slide switch located in the electronics cavity of the microphone.

Shock mount

Sandhill 6011A shock mount allows one to place the microphone in any position and as close to the sound source as one needs. Due to the mechanical design and Sandhill Audio custom composition, the suspension properties of the shock mount will remain constant in any angular position, resulting in the best possible floor and handling noise rejection at all times. The contact of the microphone to the shock mount is secured with sturdy M6 machine screw to prevent fallouts.

Case

Sandhill 6011A is supplied with water and gas tight High Performance Resin Case. These cases will secure your Sandhill Microphones even out of the hardest airport treatment or a car runover!

Polar pattern

The Sandhill 6011A figure of eight - polar pattern is symmetrical on a large frequency range. For this reason the microphone hears the stray field in a very musical way and the dynamics of the recorded media can be compressed effectively while the tone and the transients stay in a good balance. A thing worth mentioning is that the microphone is nearly deaf to the sound coming from the sides on the critical transient range. This feature combined with the high SPL-headroom allows the microphone to be used safely in most close-miking situations.

The 6011A is a precision weapon when looking for a big snare sound- the attack of the snare is huge and the hi-hat doesn't mess things up. Many sound engineers have found the 6011A to be very practical in both close and ambient miking of a drum set.

Sandhill Audio 6011A Ribbon Microphone (Pair) Specifications

  • Directional characteristics: Figure-of-Eight
  • Ribbon dimensions: 60 - 4,7 mm
  • Ribbon technology: NCRT (Nano Composite Ribbon Technology)
  • Ribbon profile: Sandhill VariGeo (Variable Geometry)
  • Principle of operation: Pressure Gradient
  • Body type: Machined Aluminium
  • Frequency range, ± 3 dB: 20 Hz - 15 kHz
  • Sensitivity (open circuit): 4,1 mV/Pa *
  • Equivalent noise level (A-weighted): 22 dB ( IEC 651) *
  • Equivalent noise level (CCIR-weighted): 36 dB (ITU-R BS.468-4) *
  • Dynamic range (1% THD, 1kHz, A-weighted self noise): 122dB
  • S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL) A-weighted: 72 dB*
  • Max. SPL, peak before clipping (with 6dB preattenuation): 160 dB
  • Output impedance: 105 ohm, impedance balanced
  • Current consumption: 3,1mA, 48 volt phantom powered
  • Connector: 3-pin male XLR connector, pin 2 Hot
  • Weight: 450 g
  • Dimensions: 50/172/25 mm

* exact value is available in the microphone's individual measuring data

Click here to view all Sandhill Audio products