Solid State Logic SSL X-Rack Stereo Buss Compressor Module at FrontEndAudio.com

Solid State Logic XLogic X-Rack Stereo Buss Compressor Module Details

The Solid State Logic XLogic X-Rack Stereo Buss Compressor effectively gives you the centre section compressor from the 1980’s G-Series analogue console - which is needless to say, a legend of mix-bus compressors. It is a simple unit with a simple purpose; it makes complete mixes sound bigger, with more power, punch and drive. It brings cohesion and strength to your mix without compromising clarity. The Stereo Bus Compressor Module brings this classic ‘audio glue’ to you with spectacular SuperAnalogue audio performance.

Special Note

Requires either an SSL X-Rack or SSL Mynx for operation.

Solid State Logic XLogic X-Rack Stereo Buss Compressor Module Features

Classic sonic character and mix finalising capabilities of SSL Stereo Bus Compression
True Stereo side-chain input for external signal keying
Link control enables several modules to be combined for surround compression
Gain reduction meter as fitted to the classic SSL console range
Electronically balanced XLR connections

Solid State Logic XLogic X-Rack Stereo Buss Compressor Module Specifications

Physical
- Depth:
  - 200mm / 7.9 inches including front panel knobs, excluding connectors
  - 275mm / 10.9 inches including front panel knobs and connectors
- Height: 171mm / 6.75 inches
- Width:
  - 70mm / 2.8 inches front/rear panels
  - 84mm / 3.3 inches overall width (front and rear panels are offset)
- Weight: 520g / 1.2 pounds
- Boxed size: 190mm x 290mm x 100mm / 7.5" x 11.5" x 4.0"
- Boxed weight: 760g / 1.7 pounds
Performance Specifications
- THD + Noise*: < 0.03% (20Hz – 20kHz)
- Input Impedance: > 10kΩ
- Output Headroom: > +26dBu at onset of clipping
- Frequency Response*:
  - ±0.3dB from 20Hz to 20kHz
  - –3dB at 90kHz
- Noise (input terminated with 50Ω): < –90dBu
- Crosstalk: < –100dB
- Common Mode Rejection:
  - > 70dB from 50Hz to 1kHz
  - > 60dB at 10kHz