Home > Studio Recording > Digital Gear > Audio Interfaces > USB Audio Interfaces >

SPL Creon USB Audio Interface

SPL Creon
SPL Creon
Alternative Views:

List Price: $649.00
Our Price: $599.00

Availability: Usually Ships in 24 Hours
Product Code: 9114

Select Your Color


SPL Creon USB Audio Interface

The SPL Creon USB Interface is a combination of audio interface, preamp and monitoring controller all-in-one. Based on the SPL Crimson, the Creon simplifies the offerings of the Crimson, while clocking in at a lower price point.

Creon is designed to operate with your Digital Audio Workstation. But you can also do a lot with it as a stand-alone device: plug in an instrument and play. Connect a microphone and sing along. Mix your own monitor signal with playback or guide tracks from any source. What you are playing is not bad? Turn on the DAW and record it.

SPL Creon USB Audio Interface Features

  • 2 discrete SPL microphone preamplifiers
  • Instrument preamplifier (Hi-Z, +22 dBu)
  • 2 Line inputs
  • 2 Channel USB-Interface with 24Bit/192kHz converter
  • USB Class 2.0 compliant for iOS device recording/monitoring
  • Powerful headphone amplifier
  • Stereo speaker output
  • Play-along and monitoring also without DAW (stand-alone)
  • Real-time analog monitoring
  • One knob monitor mix
  • 34V operational voltage for professional levels up to +22.8dB
  • Pro level boost for consumer electronics
  • Very low jitter due to FMCTM (Fixed-Master-Clock)
  • No sample rate conversion or clock recovery for true 1:1 audio
  • Hi-Speed USB 2.0 (480MBit/s)
  • Windows XP/7/8/10, Mac OS X 10.6 or higher, iOS 6 and higher
  • HxWxD: 67x330x212 mm, 2.64x13x8.34 inch
  • Made in Germany

SPL Creon USB Audio Interface Specifications

  • Recording Channels
    • 2 microphone inputs (XLR)
    • 1 instrument input (TS)
    • 2 balanced line inputs (TRS)
    • Two channels can be recorded simultaneously.
  • Playback Channels
    • 2 channels via USB (DAW 1|2)
  • Analog Inputs (Sources)
    • 2 TRS line input channels (balanced)
    • 2 RCA line input channels (unbalanced)
  • Digital Input
    • 1 USB
  • Analog Output
    • Speaker | Main Out (2x XLR, balanced)
    • 1 headphone socket (TRS)
  • Digital Output
    • 1 USB
  • Hardware
    • USB 2 audio system
    • High-performance, 32 bit microcontroller
    • 24 bit audio processing
    • 2 input and 2 output channels, up to 192 kHz
    • Sample rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz or 192kHz
    • Fixed master clock for lowest jitter
    • True 1:1 audio, no sample rate conversion or clock recovery
  • Software
    • Windows XP/7/8/10, Mac OS X 10.6 or higher, iOS 6 and higher
      • No driver required for Mac
    • USB Audio Class 2.0 compliance (asynchronous mode)
    • Low-latency Windows ASIO and WDM driver
    • Multi-application mode, simultaneous ASIO and/or WDM playback
    • Driver feedback synchronization to hardware clock
    • ASIO control panel for Windows

SPL Creon USB Audio Interface Includes

  • Creon (otherwise it would be awkward)
  • 12V power supply
  • USB cable

SPL Creon USB Audio Interface Downloads

Click here to view all SPL products