Rode NT55 Multi-Pattern Microphones (Matched Pair)

Rode

(No reviews yet) Write a Review
Product Code: 9841
$829.00
Adding to cart… The item has been added
We Need A Few Days

This item must be ordered in from the manufacturer. Give us a few days to get it here and heading your way. Go ahead and place your order and we will let you know as soon as it ships. If you have a deadline then please contact us before placing the order so we can meet your expectations.

Got Questions? Need Support?

888-228-4530 Contact Us!

The Rode NT55 Multi-Pattern Microphones are a matched pair of NT55 Microphones designed for stereo recording of acoustic instruments, drum overheads, cymbals and live performances. This state-of-the-art low noise balanced output microphone exhibits a wide dynamic range and full frequency response.

The Rode NT55 Multi-Pattern Microphones are a matched pair of NT55 Small-diaphragm, True-condenser Cardioid Microphone, sometimes referred to as a 'pencil mic'. The Rode NT55 adds both a three position pad (0, -10dB, -20dB) and three stage high pass filter (Off, 75Hz, 150Hz), and includes the interchangeable NT45-O omnidirectional capsule.

Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer.

Its tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for filmmaking on a mic stand or boom.

Finished in durable satin nickel, this is also available as a single microphone or as Rode NT55 Acoustically Matched Pair.

The Rode NT55 Multi-Pattern is designed and made in Australia, and covered by Rode's industry leading 10 year warranty.

Rode NT55 Multi-Pattern Microphones Features

  • Externally biased condenser
  • Cardioid or omni polar pattern using included interchangable capsules
  • Gold sputtered 1/2” capsule
  • Three position PAD - 0dB, -10dB and -20dB
  • Three position high-pass filter - flat, 75Hz and 150Hz
  • Surface mount circuitry
  • Low noise
  • Available as Certified Matched Pair

Rode NT55 Multi-Pattern Microphones Specifications

  • Acoustic Principle: Pressure Gradient
  • Active Electronics: JFET impedance converter with bipolar output buffer
  • Capsule: 0.50"
  • Polar Pattern: Cardioid and Omnidirectional [picks up all sides equally] capsules - interchangeable
  • Address Type: End
  • Frequency Range: 20Hz - 20kHz
  • Output Impedance: 100O
  • Maximum SPL: 136dB SPL (@ 1kHz, 1% THD into 1KO load)
  • Maximum Output Level: 8.0dBu (@ 1kHz, 1% THD into 1KO load)
  • Sensitivity: -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz
  • Equivalent Noise Level (A-weighted): 15dB-A
  • Power Options: +48V phantom power
  • Weight: 110.00gm
  • Dimensions: 145.00mmH x 20.00mmW x 20.00mmD
  • Output: XLR Output

Rode NT55 Multi-Pattern Microphones Includes

  • 2 x NT55 - Multi-Pattern 1/2" Condenser Microphones
  • 2 x NT45-O - Interchangeable Omnidirectional Capsule
  • 2 x RM5 - Durable Microphone Clip
  • 1 Year Warranty (free 10 years extension following registration of your microphone)

No review yet, Be first to Write a Review


What We Think

avatar

The Rode NT55 Multi-Pattern Small Diaphragm Condenser Microphones (Matched Pair) makes for a perfect set for the cost conscious recordist looking to get quality that can be used while gaining the 3-position pad and HPF features usually only available on microphones costing much, much more. Rode's build quality and consistency of sound make for a convincing pair. And the included NT45-O Omni capsules give a more natural and less hypey soundstage. This kit is worthy of consideration.

Front End Audio, Your Ultimate Pro Audio Dealer

Got questions? Call us at 1-888-228-4530 we are here to help!