Home > Recording > Signal Processors > Line Utility >

Radial Twin-Iso Line Level Isolator

Radial Twin-Iso
Radial Twin-Iso
 
List Price: $300.00
Our Price: $259.99


Availability: Usually Ships in 24 Hours
Product Code: 1825

 

Radial Twin-Iso Line Level Isolator

The Radial Twin-Iso Line Level Isolator is a balanced 2 channel, +4dB line-level isolator for professional touring, sound installation, broadcast and studio that provides isolation between various pieces of audio equipment such as consoles, amp racks, remote towers and recorders as a means of eliminating hum and buzz caused by ground loops.

The Radial Twin-Iso Line Level Isolator is a high performance two channel balanced line-level isolator, designed to eliminate hum and buzz caused by ground loops when interfacing various equipment.

Central to the Radial Twin-Iso are premium Jensen® transformers. These industry-leading audio engines deliver an exceptionally linear response at all frequencies and are capable of handling as much as +21dB without distortion. Placed in between the audio source and destination, they assure absolute signal integrity is retained no matter what the program material.

As with all Radial products, the Radial Twin-Iso is road-ready to handle the most abusive environments. It features 14-gauge steel I-beam construction and an innovative bookend design that creates a protective zone around the switches and connectors. A full bottom no-slip pad provides mechanical isolation from vibrations while adding electrical insulation between electrically charged devices. When combined with the J-Rak™ or J-Clamp™, the Radial Twin-Iso easily integrates into 19" rack systems or may be permanently mounted inside racks or under podiums.

The Radial Twin-Iso solves noise problems with plug & play simplicity while delivering exceptional audio signal integrity.

Radial Twin-Iso Line Level Isolator Features

  • Stereo isolator, withstands up to +21dB without distortion
  • Eliminates hum and buzz caused by ground loops
  • Suitable for balanced & unbalanced signals
  • Exceptionally linear response from 20Hz to 20kHz
  • Sub-mixing two consoles together
  • Mixer to a remote amp rack or speaker tower
  • Mixer to recorder or broadcast feed
  • Between professional VTR and PA system
  • Handles huge transients without distortion
  • Completely passive, no power needed
  • Eliminates hum and buzz caused by ground loops
  • Dual-mono or stereo operation

Radial Twin-Iso Line Level Isolator Applications

  • Using the Twin-Iso to isolate two mixers - Isolating two mixers is common practice in live touring as it allows the opening act to set their mix and feed it into the main act's console. By isolating the two, you eliminate the potential for ground hum and buzz caused by ground loops.
  • Using the Twin-Iso on the amp rack - A common problem is the noise encountered when connecting two pieces of gear that may be powered on a different audio circuit. The Radial Twin-Iso easily solves the problem by isolating the input from the output of the other device.
  • Using the Twin-Iso to eliminate noise - In the studio, you can sometimes come across old vintage gear that may sound great, but due to less than ideal grounding, may introduce noise. The Radial Twin-Iso is equipped with ground loops and 100% isolation to eliminate these types of problems.

Radial Twin-Iso Line Level Isolator Specifications

  • Technical Specs:
    • Audio Circuit Type: Passive line-level isolation, transformer based
    • Number of Channels: Stereo (dual mono)
    • Frequency Response: 10Hz ~ 50KHz (± 1dB), flat from 20Hz to 20kHz
    • Dynamic Range: 135dB
    • Maximum Input: +21dBu @ 1kHz, 1% THD+N
    • Total Harmonic Distortion: 0.001% @ 1kHz, +4dBu output
    • Phase Deviation: 0.5° @ 100Hz; 3° @ 20Hz
    • Input Impedance: 600 Ohms, balanced
    • Output Impedance: 600 Ohms, balanced
  • Features:
    • Transformer: Custom wound Eclipse ET-LD2
    • High Pass Filter: -3dB @ 100Hz (12dB.Oct.)
    • Ground Lift: Disconnects XLR pin-1 at isolated output
    • XLR Configuration: AES standard (pin-2 hot)
    • Connectors: XLR-F inputs; XLR-M outputs
  • General:
    • Construction: 14 gauge steel chassis & outer shell
    • Finish: Durable powder coat
    • Size: (W x H x D) 84 x 127 x 48mm (3.3" x 5.0" x 2")
    • Weight: 0.70 kg (1.55 lbs)
    • Shipping Size: W x H x D: 102 x 76 x 165mm (4" x 3" x 6.5")
    • Shipping Weight: .87 kg (1.92 lbs)
    • Power: Passive, no power required
    • Conditions: For use in dry locations only between 5°C and 40°C

Radial Twin-Iso Line Level Isolator Includes

  • Radial Twin-Iso Line Level Isolator
  • User Guide
  • 3 Year Warranty

Radial Twin-Iso Line Level Isolator Downloads

Click here to view all Radial products


You may also need...
Radial J-Rak 8 Direct Box Rack Radial J-Rak 4 Direct Box Rack Radial J-Iso Stereo Line Isolator Radial JDI Duplex Passive Direct Box
Our Price: $139.99

Add
Our Price: $119.99

Add
Our Price: $259.99

Add
Our Price: $349.99

Add
Radial J-Rak 8 Radial J-Rak 4 Radial J-Iso Radial JDI Duplex
Radial J-Clamp Mounting Adaptor
Our Price: $29.99

Add
Radial J-Clamp