Home > Recording > Signal Processors > Line Utility >

Radial Twin-Iso Line Level Isolation Device

Radial Twin-Iso
Radial Twin-Iso
 
List Price: $300.00
Our Price: $259.99


Availability: Usually Ships in 24 Hours
Product Code: 1825

 

Radial Twin-Iso Line Level Isolation Device

The Radial Twin-Iso Line Level Isolation Device simply eliminates noise and ground induced hum between line-level - balanced or unbalanced - devices, such as when connecting two mixers together, or even for long runs between the mixer and an amp rack where the devices are powered on a difference audio circuit. The Radial Twin-Iso Line Level Isolation Device solves these problems and more with elegance and no loss of fidelity. Built like a tank and ready to rock - the Radial Twin-Iso Line Level Isolation Device exemplifies Radial Engineering's core principles of design and functionality.

The Radial Twin-Iso Line Level Isolation Device is a high performance two channel balanced line-level isolator for professional touring, sound installation, broadcast and studio that provides isolation between various pieces of audio equipment such as consoles, amp racks, remote towers and recorders as a means of eliminating hum and buzz caused by ground loops.

Central to the Radial Twin-Iso Line Level Isolation Device are two high performance Eclipse transformers. These stellar audio engines are modelled after Deane Jensen's original designs to deliver an exceptionally linear response at all frequencies and are capable of handling as much as +21dB without distortion. Placed in between the audio source and destination, they assure absolute signal integrity is retained no matter what the program material.

As with all Radial products, the Radial Twin-Iso Line Level Isolation Device is road-ready to handle the most abusive environments. It features 14 gauge steel I-beam construction and an innovative book-end design that creates a protective zone around switches and connectors. A full bottom no-slip pad provides mechanical isolation from vibrations while adding electrical insulation between electrically charged devices. When combined with the J-Rak or J-Clamp, the Radial Twin-Iso Line Level Isolation Device easily integrates into 19" rack systems or may be permanently mounted inside racks or under podiums.

The Radial Twin-Iso Line Level Isolation Device solves noise problems with plug & play simplicity while delivering exceptional audio signal integrity.

Radial Twin-Iso Line Level Isolation Device Features

  • Features
    • Stereo isolator, +4dB line-level with up to +21dB without distortion
    • Suitable for balanced & unbalanced signals
    • Transformer isolation eliminates hum and buzz caused by ground loops
    • Eclipse transformer-equipped for optimum sound quality
    • Exceptionally linear frequency response from 20Hz to 20kHz
    • Phase reverse switch for each channel
  • Applications
    • Sub-mixing two consoles together
    • Mixer to a remote amp rack or speaker tower
    • Mixer to recorder or broadcast feed
    • Between professional VTR and PA system
  • Cool stuff
    • Handles huge transients without distortion
    • Completely passive, no power needed
    • Eliminates hum and buzz caused by ground loops
    • Dual-mono or stereo operation
    • 3 year transferable warranty

Radial Twin-Iso Line Level Isolation Device Specifications

  • Specifications
    • Audio circuit type: Passive line-level isolation, transformer based
    • Number of channels: Stereo (dual mono)
    • Frequency response: 10Hz ~ 50KHz ( 1dB), flat from 20Hz to 20kHz
    • Dynamic range: 135dB
    • Maximum input: +21dBu @ 1kHz, 1% THD+N
    • Total harmonic distortion: 0.001% @ 1kHz, +4dBu output
    • Phase deviation: 0.5 @ 100Hz; 3 @ 20Hz
    • Input impedance: 600 Ohms, balanced
    • Output impedance: 600 Ohms, balanced
  • Features
    • Transformer: Custom wound Eclipse ET-LD2
    • High pass filter: -3dB @ 100Hz (12dB.Oct.)
    • Ground lift: Disconnects XLR pin-1 at isolated output
    • XLR configuration: AES standard (pin-2 hot)
    • Connectors: XLR-F inputs; XLR-M outputs
  • General
    • Construction: 14 gauge steel chassis & outer shell
    • Finish: Durable powder coat
    • Size: (W x H x D) 84 x 127 x 48mm (3.3" x 5.0" x 2")
    • Weight: 0.70 kg (1.55 lbs)
    • Shipping size: W x H x D: 102 x 76 x 165mm (4" x 3" x 6.5")
    • Shipping weight: .87 kg (1.92 lbs)
    • Power: Passive, no power required
    • Conditions: For use in dry locations only between 5C and 40C
    • Warranty: Radial 3-year, transferable

Radial Twin-Iso Line Level Isolation Device Includes

  • Radial Twin-Iso Line Level Isolation Device
  • Manual & Literature
  • Radial Sticker
  • 3 year transferable warranty

Radial Twin-Iso Line Level Isolation Device Downloads

Click here to view all Radial products


You may also need...
Radial J-Rak 8 8-Space DI Rack Radial JDI Duplex Passive Direct Box Radial J-Iso Stereo Line Isolator Radial J-Rak 4 4-Space DI Rack Bundle
Our Price: $139.99

Add
Our Price: $349.99

Add
Our Price: $259.99

Add

Add
Radial J-Rak 8 Radial JDI Duplex Radial J-Iso Radial J-Rak 4 Bundle
Radial J-Rak 4 4-Space DI Rack Radial J-Rak 8 8-Space DI Rack Bundle Radial J-Clamp Mounting Adaptor for Radial JDI
Our Price: $119.99

Add

Add
Our Price: $29.99

Add
Radial J-Rak 4 Radial J-Rak 8 Bundle Radial J-Clamp