Home > Studio Recording > Analog Gear > Signal Processors > Splitters >

Radial LX8 Line Splitter

Radial LX8
Radial LX8
Alternative Views:

List Price: $1,300.00
Our Price: $1,149.99

Availability: Usually Ships in 3 to 5 Days
Product Code: 9999-13147


Radial LX8 Line Splitter

The Radial LX8 Line Splitter is an eight channel, balanced line splitter in a compact 1RU package designed specifically to manage balanced signals in professional audio systems. Dividing the signals three ways; to a direct output; a direct output with ground lift; and an isolated output, and featuring a high performance Jensen™ bridging transformer, the LX8 delivers isolated output with eliminated hum and buzz caused by ground loops.

The Radial LX8 Line Splitter is an eight channel passive line-level isolator that splits a source between two destinations or simply isolates devices to eliminate the hum and buzz caused by ground loops.

The single rack space design begins with a 100% passive circuit which means it does not require any powering whatsoever to make it work. Inside, each of the eight channels is equipped with a premium Jensen® JT-123-SLPC transformer that is able to handle transients in excess of +26dB at all frequencies right down to 20Hz without audible distortion. This results in an accurate signal transfer with minimal phase shift or artifact. In the studio, the Jensen transformer delivers added warmth and a natural 'vintage-sounding' compression that is preferred by the most critical listeners. When used in larger systems, you benefit from significantly lower noise.

Input connections include a series of front-panel XLRs for easy integration into live racks or a rear-mounted 25-pin D-sub. Output connections include a hardwire thru-put, a transformer isolated output and an auxiliary output, the latter two being equipped with ground lift switches to help eliminate hum and buzz caused by ground loops. All rear panel connections are presented with a choice of standard 25-pin D-Sub wired to the Tascam-ProTools standard or with screw-down Phoenix connectors for easy field termination for permanent installations. (Note: The Phoenix cable terminal connectors are sold separately).

All of the eight incoming signals are routed to the direct output, the transformer isolated output and an auxiliary out, enabling multiple signal paths to be put into practice without the usual noise that is associated. These features combine to make the Radial LX8 the perfect isolator for the most demanding multi-channel audio system.

Radial LX8 Line Splitter Features

  • 8-Channel balanced line level signal splitter & isolator
  • Handles +26dB signals without distortion or artifact
  • Jensen transformer-equipped for optimal signal transfer
  • Eliminates hum and buzz caused by ground loops

Radial LX8 Line Splitter Applications

  • Using the LX8 to split line levels on stage - Recording live using high quality preamps delivers the best results. Connect your preamps to the LX8 and split the signal to the recorder and the PA using the isolation to eliminate hum & buzz caused by ground loops.
  • Using the LX8 to feed delay towers - In larger installations, running audio to multiple destinations can cause havoc with noise due to uncertain power conditions. The LX8 isolates the second output to eliminate ground loops, reducing system set-up problems.
  • Using the LX8 to feed two different audio systems - Running audio around various environments such as large venues, multi-function rooms or broadcast facilities can often lead to noise polluting the audio system. The LX8 eliminates noise problems due to ground loops.

Radial LX8 Line Splitter Specifications

  • Technical Specs:
    • Audio Circuit Type: Passive transformer based line level splitter
    • Number of Channels: 8 channel 3-way splitter (1-in/3-out)
    • Frequency Response: 20Hz ~ 20KHz (+0dB/-0.1dB)
    • Dynamic Range: 140dB
    • Maximum Input: +26dBu @ 1kHz, +24dBu @ 20Hz
    • THD +Noise: 0.003% @ 1kHz
    • Phase Deviation: 0.2° @ 100Hz; 0.4° @ 20Hz
    • Common Mode Rejection (CMR): -85dB @ 60Hz
    • Input Impedance: 600 Ohms, balanced
    • Output Impedance: 600 Ohms, balanced
  • Features:
    • Transformer: Jensen JT-123-SLPC
    • Ground Lift - Isolated Out: Disconnects ground path at isolated output
    • Ground Lift - Auxiliary Out: Disconnects ground path at auxiliary output
    • XLR Configuration: AES standard (pin-1 ground, pin-2 hot, pin-3 cold)
    • DB-25 Configuration: Tascam / ProTools 8 channel interface standard
  • General:
    • Construction: 14 gauge steel
    • Finish: Durable powder coat
    • Size (L x W x H): 19" x 6" x 1.75" (48.25 x 15.25 x 4.45cm)
    • Weight: 7.5lb (3.4kg)
    • Shipping Size (L x W x H): 22" x 10.375" x 4.5" (55.9cm x 26.4cm x 11.4cm)
    • Shipping Weight: 8lb (3.63kg)
    • Power: Passive, no power required
    • Conditions: For use in dry locations only between 5°C and 40°C

Radial LX8 Line Splitter Includes

  • Radial LX8 Line Splitter
  • User Guide
  • 3 Year Warranty

Radial LX8 Line Splitter Downloads

Click here to view all Radial products