RME AEB 8-1 Analog Expansion Boards for Hammerfall Series

Home > Audio Interfaces > PCI/Desktop >

RME AEB8-I Analog Expansion Boards for Hammerfall Series

RME AEB 8-I

List Price: $299.00
Our Price: $269.00
You Save $30.00!

Questions? Click here to email us .

Availability: Usually Ships in 24 Hours
Product Code: 1869

Description

RME AEB8-I Analog Expansion Boards for Hammerfall Series Details
The AEB8-I offers 8 inputs with 4 stereo TRS jacks. Usual insert cable can be used to split the connectors from stereo jack to mono jacks. Level adjustment +4 dBu/-10 dBV, 107 dBA SNR and highest suppression of PC-noise guarantee perfect sound quality.

RME AEB8-I Analog Expansion Boards for Hammerfall Series Specifications

Input AEB8-I 4 x 1/4" TRS jack, unbalanced
Dynamic ratio 104 dB (RMS unweighted), 107 dBA
THD+N -95 dB (0.0017 %)
Frequency response -0.1 dB: 10 Hz - 21 kHz
Input level for 0 dBFS @ +4 dBu: +12 dBu
Input level for 0 dBFS @ -10 dBV: +2 dBV
Crosstalk > 110 dB
Supported sample rates 32 kHz - 48 kHz Input impedance 10 kOhm
Power supply uses 3.5" floppy connector, 12 V/5 V DC, 190 mA
AEB needs no slot on the motherboard
Standard bracket, board dimensions AEB4: 85 x 95 mm, AEB8: 120 x 95 mm
1 internal cable 2-pin, 1 internal cable 3-pin, 1 power adapter cable 5 1/4" to 2 x 3.5" included

-NOTES ON COMPATIBILITY-
HDSP 9652
Two AEBx-I and two AEBx-O or two TEB can be connected and operated simultaneously, in all possible combinations. One TEB can be used together with either one AEBx-I or AEBx-O

DIGI96 SERIES
AEBs use the internal ADAT interface of the DIGI cards. Therefore they do not work with the DIGI96 (which did not support ADAT.) To operate the AEB4-I and AEB8-I the used DIGIs must have the connectors ST6/7 on board (for the Word Clock Module.) These were not present on the very first cards of the DIGI96 series (1998 to beginning of 1999.)

One AEBx-I and one AEBx-O can be connected and operated simultaneously, in all possible combinations. Or one TEB.

HAMMERFALL DSP MULTIFACE / DIGIFACE
Multiface and Digiface use the Hammerfall DSP PCI card. This card has no internal inputs or outputs. Therefore no Expansion Boards can be used.

HAMMERFALL SERIES
An operation with the Hammerfall or Hammerfall Light requires board revision 1.5 or higher, because the internal connectors ADAT1Out, ADAT2Out and ST7 were not implemented in earlier versions.

One AEBx-I and two AEBx-O can be connected and operated simultaneously, in all possible combinations. Or one TEB and one AEBx-O.

Accessories for this product...

Monster Standard 100 20 Foot Microphone Cable

Our Price: $29.95
Add

Sony MDR7506 Studio Monitor Headphones

Our Price: $99.00
Add

Shure SM57 Cardioid Dynamic Microphone

Our Price: $96.00
Add

Related Products...

RME HDSP 9632 Hammerfall DSP 24/96 Audio PCI card

Our Price: $499.00
Add

RME AEB 4-I Analog Expansion Boards for Hammerfall

Our Price: $219.00
Add

RME HDSP AES-32 PCI Card

Our Price: $1,199.00
Add

Creamware Plus I/O

Our Price: $270.00
Add

Creamware Plus I/O 20-Channel Plate for Power-Booster

RME Bundle

Our Price: $1,199.00
Add

Share your knowledge of this product with other customers... Be the first to write a review.

Browse for more products in the same category as this item:

Audio Interfaces
Audio Interfaces > PCI/Desktop

	AcoustiLock Temperature Meter �C for ACL24TD & ACL16TD $179.00
	RME HDSP 96/52 52 Channel I/O Card $699.00
	PreSonus HP4 4-Channel Headphone Amplifier $129.00
	sE Electronics Gemini II Dual Tube Condenser Microphone $1,249.00
	M-Audio BX8a Deluxe Studio Reference Monitors (Pair) $499.00
	Alesis MultiMix Power Supply for MultiMix 12 & 16 FireWire Mixers $65.00
	AcoustiLock 4U Face Plates for All Enclosures $34.00
	AcoustiLock oCab Short Noise Reduction and Isolation Cabinet (Maple) $2,079.00
	Digidesign Pro Tools Custom Keyboard (Mac) $119.00