Home > Recording > Audio Interfaces > Firewire Audio Interfaces >

  RME Fireface 802 Audio Interface

RME Fireface 802
RME Fireface 802
 
Alternative Views:


Save 10% on this product today by using discount SAVETEN during checkout!
List Price: $2,199.00
Our Price: $1,999.00


Availability: Usually Ships in 24 Hours
Product Code: 9999-15546

 

RME Fireface 802 Audio Interface

RME Fireface 802 Audio Interface, a highly integrated pro audio solution, a full-blown studio, all within a 19" enclosure. An interface designed for users who don't want to make compromises in sound, stability and ultra-low latency operation, and who long for an unrivaled professional feature set.

RME Fireface 802 Audio Interface Details

The RME Fireface 802 Audio Interface renews RME"?s reputation built on the legendary Fireface 800. 60 channels of audio, high-end microphone preamps, reference class converters, a complete effects section and operation at up to 192 kHz are the base for many more features: Ultra-low latency operation with USB or FireWire, combined with the legendary RME driver stability and maintenance. Active jitter suppression, individually switchable reference levels for all inputs and outputs, full stand-alone functionality, RME"?s unique DIGICheck metering and analysis toolbox, and identical operation on Windows PC and Mac.

TotalMix FX, RME"?s digital high-end mixer and signal router, driven by two powerful DSPs, with integrated EQ, Dynamics and Reverb/Echo effects at up to 192 kHz, plus a built-in monitoring controller. 


The full-blown feature set also includes optional Class Compliant mode and operation with TotalMix FX for iPad, RME"?s app to fully control the 802 from the iPad, without any computer. The easy to use app includes metering for all 90 channels plus effects bus, different setup screens, and complete control of all features.

The Fireface 802 is a highly integrated pro audio solution, a full-blown studio, all within a 19" enclosure. An interface designed for users who don"?t want to make compromises in sound, stability and ultra-low latency operation, and who long for an unrivaled professional feature set. Once again a milestone interface from RME, including the best of the best and even a bit more.

RME Fireface 802 Audio Interface Features

  • 30 Input / 30 Output channels
  • 12 x Analog I/O
  • 4 x Mic/Instrument Preamp
  • 1 x AES/EBU I/O
  • 2 x ADAT I/O (or 1 x ADAT I/O plus 1 x SPDIF I/O optical)
  • 1 x Word Clock I/O
  • 1 x MIDI I/O
  • FireWire or USB operation
  • TotalMix FX
  • Optional: Advanced Remote Control
  • Analog I/O
    • Back
      • Inputs 1-8 (TRS - balanced)
      • Outputs 1-8 (TRS "" balanced)
    • Front
      • Inputs: 9-12 (XLR/TS Combo "" balanced/unbalanced)
      • Outputs: 9/10, 11/12 - Phones (TRS - Stereo, unbalanced)
  • Digital I/O
    • AES/EBU
    • ADAT
    • SPDIF
    • Word Clock & MIDI
  • USB & Firewire
  • SteadyClock
  • ICC Intelligent Clock Control
  • DIGICheck
  • Power Supply
  • Stand Alone Operation with Setup Recall

RME Fireface 802 Audio Interface Specifications

  • AD, Line In 1-8, rear
    • Resolution AD: 24 bit
    • Signal to Noise ratio (SNR): 113 dB RMS unweighted, 116 dBA
    • Frequency response @ 44.1 kHz, -0.1 dB: 5 Hz - 20.8 kHz
    • Frequency response @ 96 kHz, -0.5 dB: 5 Hz - 45.8 kHz
    • Frequency response @ 192 kHz, -1 dB: 5 Hz - 92 kHz
    • THD: < -110 dB, < 0.00032 %
    • THD+N: < -104 dB, < 0.00063 %
    • Channel separation: > 110 dB
    • Input: 6.3 mm TRS jack, electronically balanced
    • Input sensitivity: 8 kOhm unbalanced, 12 kOhm balanced
    • Input sensitivity switchable to Lo Gain, +4 dBu, -10 dBV
    • Input level for 0 dBFS @ Lo Gain: +19 dBu
    • Input level for 0 dBFS @ +4 dBu: +13 dBu
  • Microphone In 9-12, front
    • As AD, but:
    • Input: XLR, electronically balanced
    • Input impedance: 3.4 kOhm
    • Signal to Noise ratio (SNR): 112 dB RMS unweighted, 116 dBA
    • Gain range: 54 dB
    • Maximum input level, Gain +6 dB: +10 dBu
  • Instrument In 9-12, front
    • As AD, but:
    • Input: 6.3 mm TS jack, unbalanced
    • Input impedance: 800 kOhm
    • Signal to Noise ratio (SNR): 112 dB RMS unweighted, 115 dBA
    • Maximum input level, Gain +6 dB: +21 dBu
  • DA, Line Out 1-8, rear
    • Dynamic range (DR): 115 dB RMS unweighted, 118 dBA
    • Frequency response @ 44.1 kHz, -0.5 dB: 5 Hz - 20.8 kHz
    • Frequency response @ 96 kHz, -0.5 dB: 5 Hz - 45 kHz
    • Frequency response @ 192 kHz, -1 dB: 5 Hz - 89 kHz
    • THD: -104 dB, < 0.00032 %
    • THD+N: -100 dB, < 0.00063 %
    • Channel separation: > 110 dB
    • Output: 6.3 mm TRS jack, servo-balanced
    • Output impedance: 75 Ohm
    • Output level switchable Hi Gain, +4 dBu, -10 dBV
    • Output level at 0 dBFS @ Hi Gain: +19 dBu
    • Output level at 0 dBFS @ +4 dBu: +13 dBu
    • Output level at 0 dBFS @ -10 dBV: +2 dBV
  • DA - Stereo Monitor Output Phones (9-12)
    • As DA, but:
    • Output: 6.3 mm TRS stereo jack, unbalanced
    • Maximum output level at 0 dBFS, High: +16.8 dBu
    • Maximum output level at 0 dBFS, Low: +2 dBV
    • Output impedance: 30 Ohm
  • AES/EBU: 2 x XLR, transformer-balanced, galvanically isolated, according to AES3-1992
  • ADAT Optical
    • 2 x TOSLINK I/O, format according to Alesis specification
    • Standard: 2 x 8 channels 24 bit, up to 48 kHz
    • Double Speed (S/MUX): 2 x 4 channels 24 bit 96 kHz
    • Quad Speed (S/MUX4): 2 x 2 channels 24 bit 192 kHz
    • Quad Speed Windows USB: 1 x 2 channels 24 bit 192 kHz
  • SPDIF optical (via ADAT2): 1 x optical, according to IEC 60958
  • Word Clock: BNC, switchable termination

RME Fireface 802 Audio Interface System Requirements

  • Windows 8 / 7 / Vista / XP SP2 (32 & 64 bit)
  • Apple Mac OS X 10.6 or up (Core Audio)
  • Windows and Mac OS X drivers are completely identical in terms of features and functionality, as far as this is possible on the respective platform. Some features in DIGICheck are not available in the Mac version.

Click here to view all RME products


You may also need...
Lynx CBL-XFDR18 S/PDIF Adapter RME TCO FF Expansion Board
Our Price: $8.00

Add
Our Price: $529.00

Add
Lynx CBL-XFDR18 RME TCO FF

Average Customer Review 5 of 5 Total Reviews: 1

| Write a review!


  0 of 0 people found the following review helpful:
 
RME Fireface 802 - fantastic August 7, 2014
Reviewer: Steven Gordon from Burbank, CA United States  
I replaced my Apogee Ensemble with the RME. Fantastic sound, easy setup. I have to learn Totalmix, but I can see that it's a great piece of software on its own. Again, Ryan at Frontendaudio steered me in exactly the right direction.

Was this review helpful to you?