RME AEB8-O Analog Expansion Boards for Hammerfall Series Details
Analog Expansion Board for the DIGI96 series 8 analog outputs with 24 bit DA-converters

The AEB8-O offers 8 outputs with 4 stereo TRS jacks. Usual insert cable can be used to split the connectors from stereo jack to mono jacks. It is also possible to drive up to 4 stereo headphones directly. Level adjustment +4 dBu/-10 dBV, 106 dBA SNR and highest suppression of PC-noise guarantee perfect sound quality.

RME AEB8-O Analog Expansion Boards for Hammerfall Series Specifications

• Output AEB8-O 4 x 1/4" TRS jack, unbalanced
• Dynamic ratio 103 dB (RMS unweighted), 106 dBA
• THD+N -95 dB (0.0017 %)
  
• Frequency response -0.1 dB: 10 Hz - 21 kHz
• Output level for 0 dBFS @ +4 dBu: +12 dBu
• Output level for 0 dBFS @ -10 dBV: +2 dBV
• Crosstalk > 110 dB
• Supported sample rates 32 kHz - 48 kHz
• Output impedance 75 Ohm
• Power supply uses 3.5" floppy connector, 12/5 V DC, 190 mA
• AEB needs no slot on the motherboard
• Standard bracket, board dimensions AEB4: 85 x 95 mm, AEB8: 120 x 95 mm
• 1 internal cable 2-pin, 1 power adapter cable 5 1/4" to 2 x 3.5" included