| Apogee Rosetta 200 2-Channel 192kHz 24-bit AD/DA Converter Details
Connect the Apogee Rosetta 200 directly to your Symphony System, Pro Tools HD, or to any Native DAW via the X-Symphony, X-HD or X-FireWire card
The Apogee Rosetta 200 gives you 2 channels of superior AD/DA conversion at sample rates of up to 192k, Apogee´s “SoftLimit”, “UV22HR”, and our advanced “Intelliclock”. The result is a premium digital recording solution that is built for the professional recording facility yet economical enough for the project studio.
Legendary Apogee Conversion in High-Definition
The most crucial process in the digital recording environment is high-quality analog to digital conversion and the most trusted and desirable converters are made by Apogee. With up to 192k standard sample rates, the Rosetta Series combines Apogee’s legendary conversion quality with flexibility that complements any digital audio workstation.
Symphony Connection
Either with the Symphony PCIe card and the extremely powerful Mac Pro or the Symphony Mobile card with the portable yet powerful Mac Book Pro, the Rosetta Series will make a great front end for your Symphony system when only a few channels of I/O are needed.The great thing is that you can expand later by adding another Rosetta, or by adding from the AD-16X and DA-16X series converters.
More about Symphony>
Pro Tools HD or Native FireWire connection
Like the all new generation Apogee hardware, the Rosetta Series has an expansion card slot that accommodates all Apogee X-Series cards. This gives the Rosetta Series outstanding connection capability to Pro Tools HD with the “X-HD” card, or connect to any native DAW using the “X-FireWire" card.
Intelliclock: Dual Stage Jitter Reduction
Another essential for outstanding digital recording is maintaining an ultra-low-jitter clock signal. To accomplish this, Rosetta Series utilizes Apogee’s Intelliclock. Intelliclock is really two clocks in one. A fast-responding ´read´ clock with a wide locking range fills a dedicated FIFO buffer while an ultra-low-jitter ´write´ clock writes the data out of the buffer, and is used to clock the converters.
SoftLimit: Maximize Levels, Minimize Overs
One of the greatest difficulties in digital recording is getting an adequate level without clipping and unwanted distortion. With Apogee’s SoftLimit, you can maximize digital output levels without overs.
UV22HR: Dither Down with 24-bit Detail
UV22HR is Apogee´s industry standard technology for reducing the word-length of a high-resolution digital signal to 16 bits for the Internet and CD mastering. UV22HR is also being employed to produce dramatically improved Internet and computer audio content without increased file sizes or data rates.
CODA: Audio Finishing Module (Rosetta 200 only)
Including the Aptomizer, Sample Rate Conversion (SRC), and UV22HR
As higher definition audio becomes ever-present in the recording process and music continues to be delivered as a product at 44.1kHz/16-bit you need tools to minimize the loss of detail and quality that can be inherent in the course of music production.
To meet these challenges Apogee has developed CODA. Unique to the Rosetta 200, CODA offers a trio of tools that will preserve the integrity of hi-def recordings with a minimal loss of quality. Heading up the CODA threesome is Apogee’s “Aptomizer”. With the Apotimizer you can maximize levels with out increasing noise and distortion. Great for mastering, the Apotimizer’s “Learn” mode allows the Rosetta 200 to automatically determine the optimum level, and use it consistently to normalize incoming audio.
Another aspect of CODA is premium sample rate conversion (SRC). In the past, Apogee hardware has not offered sample rate conversion because the results were disappointing but recent advances have made SRC a viable option and now a vital part of CODA. With Apogee’s implementation of sample rate conversion you can up or down sample without noticeably affecting the quality of your audio. Apogee’s "UV22HR" dithering technology completes the CODA triangle by offering powerful reduction of high-resolution digital audio to 16 bits for the Internet and CD mastering. It is estimated that UV22HR is used on 8 out of 10 commercially released CDs in the U.S. The Rosetta 200 with CODA on board provides an end-to-end solution for capturing and optimizing high definition digital.
Power Trio
Apogee, Apple and Euphonix have been working together to provide a range of powerful integrated music creation tools that take the process of composing, recording, editing and mixing to a whole new level.
Apogee Rosetta 200 2-Channel 192kHz 24-bit AD/DA Converter Features
-
2 channels of premium 24-bit AD/DA conversion
-
Sample rates up to 192kHz with Apogee's "Intelliclock"
-
2 channels of AES, S/PDIF (coax & optical), and ADAT/SMUX I/O
-
MIDI I/O
-
Optional FireWire expansion card for compatibility with OS X, and Windows XP (X-FireWire card)
-
Optional expansion card for direct connection to Pro Tools HD & Mix systems (X-HD card, X-Digi-Mix card)
-
"Soft Limit" for maximum digital level without overs
-
“CODA”: The “Aptomizer” Level Normalizer, Sample Rate Conversion (SRC), and Apogee’s “UV22HR” for superior dither to 16-bit
-
Full channel metering
INPUTS
-
Analog In 1-2: Balanced, XLR connectors
-
AES in: x 2, transformer balanced, XLR connectors
-
S/ PDIF In: Toslink and Coax
-
ADAT/SMUX In: Toslink
-
WC In: BNC 75 ohm
OUTPUTS
-
Analog Out 1-2: Balanced, XLR connector.
-
AES Out: x 2, transformer balanced, XLR connector
-
S/ PDIF Out: Toslink and Coax
-
ADAT/SMUX Out: Toslink
-
WC Out: BNC 75 ohm
Apogee Rosetta 200 2-Channel 192kHz 24-bit AD/DA Converter Specifications
-
Sample rates: 44.1 - 48k, 88.2 - 96k, 176.4 - 192k (+/-10%);
-
Frequency response: 10 - 20k (+/- 0.2 dB) at 44.1k
-
Analog max levels are adjustable between +2 dBu and +26 dBu
-
Dynamic range: 114 dB A weighted (AD + DA)
-
THD+N: -105 dB (AD), -103 dB (DA)
-
Power: 90-250 VAC, 50-60Hz, 45Watt
|
