Home > Rack Gear > 500-Series >

  Phoenix Audio Pivot Tone Channel/500 500-Series Channel Strip

Phoenix Audio Pivot
Phoenix Audio Pivot
 
Save 10% on this product today by using discount SAVETEN during checkout!
List Price: $799.00
Our Price: $599.00


Availability: Usually Ships in 24 Hours
Product Code: 9999-17243

 

Phoenix Audio Pivot Tone Channel/500 500-Series Channel Strip

The Phoenix Audio Pivot Tone Channel 500 is a 500 series channel strip featuring a balanced line level signal processor..

Incorporating Phoenix's class A discrete buffer amp from their world renowned Nicerizer summing mixer, a DI with their 10meg ohm inputs found in the Nice DI and a Tilt EQ circuitTilt TC/500 uses a powerful tone control Tilt EQ , a unique 3 position Tilt EQ with 3 carefully selected tilit positions to cover low frequencies at 160hz, mid frequencies at 800hz and high frequencies at 1.6khz. A dark/bright shaping control, allows you to tilt the EQ to darken your mix (add LF) or brighten the mix (add HF). There is a also a 10 position LED metering that accurately represents the output level.

The unit can also be used in bypass mode, the ouput control can be driven bringing in the Class A discrete output circuitry and output transformer to add analogue colour and saturation to any source, and a pair of units would be excellent on a mix bus or mastering.

Phoenix Audio Pivot Tone Channel/500 500-Series Channel Strip Features

  • Class A Discrete input line buffer amp
  • Class A Discrete 10meg ohm DI input
  • Class A Discrete output amp
  • Phoenix custom output transformer
  • Unique 3 position Tilt EQ
  • Controllable LF, MF & HF Tilt positions
  • Dark & bright tone control

Phoenix Audio Pivot Tone Channel/500 500-Series Channel Strip Specifications

  • Class A Stereo DI Output specs.
  • Frequency Response: 20Hz to 20Khz +/- 0.5dB
  • Maximum Output: +26dBu @ 1Khz
  • Noise: 90dB @ 22Hz to 22KHz
  • Class A, discrete, truly balanced transformerless input stage.
  • The Class A DI has a very high input impedance (10Mohm), without the use of FET's. This means that the guitar pickups are not loaded as with a lower impedance input, and so allows every transient to be reproduced, making even a cheap guitar sound exceptional.
  • Inputs: 1/4" jack (TS) input & through input on the front panel
  • Transformer isolated balanced output (XLR) on the rear panel
  • Tilt EQ with 3 fixed Tilt positions : 160hz, 800hz & 1.6khz
  • Dark/bright tone control
  • 10 position LED output metering.
  • Output level control.

Phoenix Audio Pivot Tone Channel/500 500-Series Channel Strip Includes

  • Phoenix Audio Pivot 500-Series Channel Strip

Click here to view all Phoenix Audio products