| Phoenix Audio Nice DI 2-Channel Direct Box Details
The Phoenix Audio Nice DI is a high-quality, active, Stereo DI, with Class A, discrete, high-impedance inputs (10M), and Class A, discrete, transformer balanced outputs.
The Phoenix Audio (UK) Class A, all discrete, Stereo DI has been tested and used by many professionals in studio recording environments. And the comments are always the same…”This is the definitive DI!!!”. The DI’s characteristics are very noticeable on any input source, and is superb for “sweetening” the output from DAW or any other signal source.
The Phoenix Audio “Nice DI” is a high-quality, active, Stereo DI, with Class A, discrete, high-impedance inputs (10M), and Class A, discrete, transformer balanced outputs. It has been tested and used by many guitar professionals in studio recording environments, and the comments are always the same.....The overdrive is fantastic, the guitar sounds clean, clear, and un-restrained. This is the definitive DI!!!. The DI’s characteristics are very noticeable on any input source, and is superb for “sweetening” the output from DAW or any other signal source.
Phoenix Audio Nice DI Features
- Advantages: The Class A DI has a very high input impedance (10 MOhm), without the use of FET's. This means that the guitar pickups are not loaded as with a lower impedance input, and so allows every transient to be reproduced, making even a cheap guitar sound exceptional.
- Inputs: 1/4" jack (TS) input on the front panel
- Output configuration: Transformer isolated, balanced output (XLR) on the rear panel and a 1/4" jack (TS) unbalanced output on the front panel.
Phoenix Audio Nice DI Specifications
- Class A Stereo DI Output specs.
- Gain range : 0dB minimum to +40dB maximum
- Frequency Response: 20Hz to 20Khz +/- 0.5dB
- Maximum Output: +26dBu @ 1Khz
- Noise: –90dB @ 22Hz to 22KHz
- Other features: Stereo Unit with independent gain control, mains operated, switchable input voltage (110/220VAC)
Other Information
|
