Overloud VKFX Vintage Effect Suite
Overloud VKFX Vintage Effect Suite
Overloud VKFX Vintage Effect Suite Details
The Overloud VKFX Vintage Effect Suite is a virtual rack packed with outstanding models of vintage analog effects processors, especially suited for keyboard players. It‚??s like adding an output stage modeled from several classic keyboards and external cabinets to your signal flow.
VKFX will revolutionize your sound by recreating the warm and delicious color of classic keyboards. When your sample library or synthesizer are sounding a bit too sanitized for your taste, VKFX will enliven your sound with a gritty and soulful attitude.
VKFX includes 8 premium quality effect processors:
- Essential electric piano preamp with stereo pan/tremolo
- Envelope and Dynamic Filter (Wah)
- Phase shifter
- Analog Chorus
- Tape multitap delay
- Tube amplifier
Preamp / Stereo Tremolo
This module is inspired by the classic preamp section of a 70‚??s tine-based electric piano and its unique style of stereo panning tremolo. It also features the ‚??vibrato‚?? circuit found on a well known 70‚??s reed-based electric piano and the custom ‚??hotrod‚?? preamp EQ developed and popularized in the 80s. If you want the EQ found on vintage and ‚??hot-rodded‚?? tine pianos as a part of your sound, you will be very pleased with the VKFX preamp.
The VKFX compressor is modeled on early optical style compressors, rather than the VCA compressor/limiter style used in a lot of more recent designs. VCA compression is constantly linear ‚?" the more input you feed it, the more the transients get squashed. Compressors based on optical circuits are non linear. They compress predictably at lower levels, but at higher and higher input levels, they start to allow the transients through. The bottom line is that optical style compressors tend to sound more ‚??lively‚?? and less muddy than VCA based compressors. It‚??s not uncommon to hear people refer to optical compressors as the ‚??more musical‚?? choice.
The VKFX compressor uses a ‚??soft knee‚?? approach, rather than ‚??hard knee‚??. These terms refer to how smoothly the compressor transitions, from no compression to its set value once the threshold has been breached. This gradual increase in compression ratio makes the use of compression more transparent. The term ‚??knee‚?? refers to the shape of the curve you get on a graph when you plot changes in the compression ratio as the input level is raised.
Remember the funky stuff from the 70‚??s? If you do, then you‚??ll remember one sound that is at the heart of this VKFX module. It‚??s been given different names, like Envelope Filter, Auto Filter, Wah Filter, Triggered Filter, Envelope Follower, Auto Wah, Touch Wah, Dynamic Filter, Dynamic Wah, and just plain Funky Filter. Whatever the title, it‚??s the sound that counts ‚?" and that ‚??whicka whacka‚?? sound just jumps out of a mix, whether it‚??s on guitar, bass or clavinet. The classic auto wah pedal responds to variations in the input signal level and uses those level changes to move the cutoff frequency of a resonant filter. Play softly, and the filter just mumbles away, play more sharply and the filter quickly sweeps open and closed, creating the classic ‚??wah‚?? sound. In the 70‚??s, keyboard players found the auto wah a boon, as it really bought some instruments to life, helping cut through a mix like nothing else.
The VKFX Wah expands the user‚??s control beyond the one or two knobs commonly found on the original auto wahs. You can now choose filter types, change envelope polarity, sweep the filter frequency with an LFO and sync that sweep to an internal or external clock source. You can even assign a MIDI control source (perhaps a pedal or wheel) to the sweep.
A phaser creates a sweeping effect by modulating a comb filter. With the VKFX Phaser you can recreate that kind of bubbling modulation effect so common on electric pianos. As the filter cutoff frequency is swept (usually by an LFO), you get varying degrees of harmonic cancellation and reinforcement, which results in the ‚??phasing‚?? effect we‚??ve all come to know and love. If more than one phase shifting circuit is used, the effect becomes more complex. The VKFX uses a 4-stage phase circuit, as did the most popular vintage stomp box phasers of the 70s.
Chorus gets its name from the fact that instruments processed through the effect often sound as if they have been double tracked, or as if there is a ‚??chorus‚?? of voices being played. The first vintage analog chorus effects were built using bucket-brigade components in order to create a small variable delay in the sound.
The VKFX chorus models that warm chorus sound.
It can also simulate a more sophisticated chorus device designed specifically for keyboards called the ‚??ensemble‚?? circuit found in the ‚??string machines‚?? of the 70‚??s.
The harmonic distortion produced by a valve amplifier when it‚??s overdriven is an attractive sound to most musicians (but not their neighbors at 3am!). Unfortunately, it‚??s generally only achieved by turning the amp up loud. For those of us looking for a little dirt in our sound, the 70‚??s saw the birth of stomp boxes offering ‚??solid state‚?? distortion.
Keyboard players at the time were able to get very cool distortion sounds when running their tine-based electric pianos into classic twin channel valve amps, or their tonewheel-based organ into a rotating speaker system with a valve amp. As keyboard rigs got smaller and amps became more powerful (and solid state) more than a few keyboard players attempted to replicate the valve sound of their vintage amp or rotating speaker system via a distortion pedal of some kind. One of the most popular overdrive pedals of all time was a small green stomp box, a source of inspiration in the design of the VKFX Overdrive module.
The Delay module harkens back to the days of tape echo. The original tape echo effect was created by recording an input signal to tape via a tape head and then replaying that signal through another tape head. By placing several heads at different distances along the tape path, they were also able to create different syncopations of delay depending on which heads were monitored.
One feature of tape delays that was lost in the digital move forward was the effect on the sound of the tape itself. In tape delays, the signal is delayed by keeping it on the magnetic tape for a time. For every repetition of the delay, the signal is recorded to and played back from the tape. The more repetitions, the more dramatic is the effect of the tape on the sound.
The VKFX delay utilizes an intelligent tape simulation algorithm that reproduces both the compression effects and frequency response of analog tape for each repetition of the delayed signal.
Before the advent of solid state amplifiers, the sidekick of any classic keyboard was a good valve amp. Amps such as the classic twin channel valve amp didn‚??t just amplify the original tone of an instrument, they colored and changed it in a variety of ways. Between the EQ circuit, the valves, speakers and cabinet, the sound of an instrument such a vintage tine-based electric piano was significantly altered. So much so that when solid state amplifiers arrived on the scene, many electric piano aficionados complained that their pianos lacked ‚??life‚?? and ‚??bite‚?? when they used these new ‚??improved‚?? designs.
Behind the deceptively simple fa√ßade of the VKFX‚??s Amp module is some very mature amplifier modeling code, also available in the top notch guitar amplifier software Overloud TH1, which will instantly take many players back to the ‚??comfort zone‚?? of their original twin channel valve amp with integrated 2x12‚?Ě speaker cabinet and spring reverb.
Overloud VKFX Vintage Effect Suite Features
- Highly CPU efficient coding and module layout means that users can load many instances of VKFX without the fear of processor overload.
- Simultaneous editing of all processors is available via a friendly and intuitive interface presented in the form of a rack of independent modules.
- Module order can be rearranged by simply dragging and dropping modules to where they're needed, giving users fast and total control over the effects.
- All rates and times can be sync'd to the DAW or internally timed, or can be left independent for a more 'analog' approach.
- All parameters are automatable and can be assigned to MIDI controllers.
- A flexible file management system allows individual or multiple modules to be loaded and saved--enabling easy mixing and matching of module presets saved from different sessions.
Overloud VKFX Vintage Effect Suite Specifications
- Mac: Macintosh Intel Core Solo 1.5GHz with 1GB of RAM. Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard and Mac OS X 10.7 Lion are supported.
- Windows: Pentium IV 1.5GHz / Athlon XP 1.5GHz with 1GB of RAM, Windows XP, 1024x768 screen. Windows XP, Windows Vista and Windows 7 are supported.
- Supported Formats: AU, VST, RTAS (32/64-bit Mac/Win), AAX (Pro Tools 10 Mac/Win)
Overloud VKFX Vintage Effect Suite Downloads
Click here to view all Overloud products