Home > Rack Gear > Preamps > Multi-Channel >

  Millennia HV-3D-4 Four-Channel Microphone Preamp

Millennia HV-3D-4
Millennia HV-3D-4
List Price: $3,309.00
Our Price: $2,977.99

Availability: Usually Ships in 24 Hours
Product Code: 9999-13970


Millennia HV-3D-4 Four-Channel

The Millennia Media HV-3D-4 Four-Channel Microphone Preamplifier provides the discriminating engineer with a bulletproof set of preamps, configurable with several options to meet special needs - but delivering the pure tone of the source as well as the microphone. Millennia Media's motto? 'There is no undo on your mic pre.'

The Millennia HV-3D-4 Four-Channel Microphone Preamp is the preamplifier that you come to when you are ready to make the commitment to capturing audio that is without compromise. It's the preamp you go to when you have requirements that other preamplifiers just cannot meet. It's the preamp that you go to when a mistake is not an option and it absolutely must be right from the beginning. The Millennia HV-3D is the preamp with whom recording professionals entrust their careers.

The folks at Millennia Media offer the HV-3D as a bank of pre-amplifiers that can be configured on a channel by channel basis. Let's say that you need to dedicate 2 channels of the 4 to use with ribbon or dynamic microphones. This is not a problem. The DC-Decoupling mod can be applied to as many or as few channels as needed.

Similarly, if you are a fan / user of the high-headroom DPA / B&K +130 Volt microphone systems, then the Millennia Media preamps will already be familiar. The +130 Volt option can be applied to as many or as few channels as desired.

Also, if you want to start with this 4-Channel version and convert it to an 8-Channel HV-3D-8, then we can help with that! Just let us know when you're ready.

Millennia HV-3D-4 Four-Channel Features

  • Standard Features:
    • Unsurpassed ambience retrieval
    • Transformerless design with matched hi-speed discrete transistor octet has 23 dB input headroom: no attenuator "pads"needed
    • Uncolored timbral accuracy at all dynamic levels
    • Entirely balanced audio path with precision components maintains signal integrity: THD under 5 ppm (.0005%)
    • Effortless, vividly realistic, musical performance
    • Laser-trimmed FET-based output stage has 32 dB headroom: drives 1000 foot (300 m) cable runs with ease
    • Standard 36-step gain controls (1.5 dB per step) are stereo matched to .08 dB
    • Ultra-clean toroid power supply
    • Gold audio connectors and switches
    • Mogami Neglex OFC audio wiring
    • Silver Teflon power wiring
    • Welded 16 gauge steel rack chassis
  • Options:
    • DPA (B&K) +130 V mic inputs - Perfectly matched to the DPA (formerly B&K) 4003, 4004, 4012, 4016 and 4041 high-voltage microphones.
    • DC Input Options - Ideal performance with dynamic and ribbon microphones. Available on a channel-by-channel basis
    • 75dB Gain Option - Standard maximum gain is 65dB. Available on a channel-by-channel basis
    • HDOE Output Expansion Option - Gives you three outs per channel. Excellent for redundant and fail-safe recording and live performance situations
    • AD-D96 Analog to Digital Converter Card Option - Turns your HV-3D into a powerhouse of BOTH analog and digital processing

Special Note

The Millennia Media HV-3D offers a virtually open landscape of options that allow you to build a unit that is tailored to your specific requirements - many on a Channel-By-Channel basis. So, if you want 2-channels DC-coupled and another 2 with the +130V option, we can do it.

Front End Audio is intimately familiar with these options and we will help guide you through configuring an HV-3D system that is perfect for you. Whether you're using ribbon microphones, or +130V microphones, we've got you covered.

Call us at 888-228-4530 to build your custom HV-3D. We'll make sure that you're glad you did!

Millennia HV-3D-4 Four-Channel Specifications

  • Minimum Gain: 8.5 dB
  • Maximum Gain: (1.5 dB per step, 36 steps): 65 dB (up to 75 dB on request)
  • Frequency Response: +0 / -3 dB: sub 3 Hz to beyond 300 kHz
  • Noise: 60 dB Gain, 10 Hz - 30 kHz, Inputs common: -133 dB EIN
  • Total Harmonic Distortion + Noise: 35 dB Gain, 10 Hz - 20 kHz bandwidth, +27 dBu Out: < .001%, Typ. < .0005% (< 5 ppm)
  • Intermodulation Distortion: (50 Hz & 7 kHz) 35 dB Gain, +27 dBu Out: < .0009%
  • Phase Response: 35 dB Gain, 50 Hz - 20 kHz bandwidth, +27 dBu Out: < 2 degrees deviation
  • Common Mode Rejection Ratio: 35 dB Gain, 10 Hz - 20 kHz bandwidth, 100 mV C.M.: > 65 dB, Typ > 85 dB
  • Slew Rate: 35 dB Gain, +27 dBu Out: > 25 Volts per microsecond
  • Maximum Input Level: 20 Hz - 40 kHz: +23 dBu (no attenuator pads required)
  • Maximum Output Level: 20 Hz - 40 kHz: +32 dBu
  • Phantom Input Impedance: 1 kHz: 6,750 ohms
  • Output Impedance: 24.3 Ohms (x2)
  • DPA (B&K) Mic Powering: +130 V dc max, (non-phantom)(OPTIONAL)
  • Phantom Powering: +48 V dc, +/- 2 V dc
  • Power Consumption: 45 watts maximum
  • Power Requirements Selectable: 100-120, 200-240 V ac, 50/60 Hz
  • Dimensions/Shipping Weight: 19" W x 3.5" H x 12.5" D, 25 lbs.

Millennia HV-3D-4 Four-Channel Includes

  • Millennia Media HV-3D-4
  • IEC Mains Power Cable
  • User Manual
  • Any chosen factory-installed Options

Millennia HV-3D-4 Four-Channel Downloads

What We Think

"The Millennia Media HV-3D is a unit that has been in my life in studios from the beginning. Starting out, I learned pretty quickly that if the guest engineers weren't using the preamps on the Neve in the studio, they were hooking up their own Millennia preamps. In fact, it was quite frequent that high-end clients brought their own racks of Millennia gear, bypassing the console entirely except for playback monitoring. As a young engineer, I was immediately impressed by the 'finished and regal sound' that the Millennia preamps had. It was evident that they weren't distorting anything, but they certainly weren't falsely embellishing anything either. As the years marched on, I learned more about equipment design, I found that many manufacturers have to continually rely on transformers to help shape the sound to have that finished sound - that many transformerless or electrically balanced preamps had a tendency to sound too stark or naked. But the 'together' sound of the Millennia preamps has stayed with me as a crowning achievement and as the agathon of the professional producer's or engineer's arsenal. The truth is that when you're dealing with having clients, you can't present them with anything that could be a cause for question. Millennia preamps are irrefutably good and have become a mark of the discriminating engineer. The HV-3D has made it's mark on more award winning and highly regarded recordings than you can imagine. The number of configuration options also make this an appealing unit. Stock, it comes with dual-outputs - perfect for live recording, but you can also add onboard AD conversion (and external Millennia converters as well), and the option exists for adding an additional set of outputs; great for recording redundancy. On the input side, you can populate the set of unused (covered) XLR ports with either DC-Coupled inputs (for Ribbon Microphones where you want to isolate the mics from any potential of accidentally receiving phantom power) or outfit those ports with +130V four-pin female XLR connectors for use only with DPA (formerly B&K) 4003, 4004, 4012, 4016 and 4041 high-voltage microphones. This last option provides an open dynamic range not possible with normal +48 volt phantom powered microphones. This 130-Volt system is really for the ultra-discriminating engineer and Millennia certainly delivers. Call us at 888-228-4530 to configure your Millennia HV-3D, and get started capturing a quality of sound that hasn't been possible with the gear you've been using thus far - unless that gear is Millennia Media gear and you're back for seconds or thirds, of course :-) "
Alan Moon - Front End Audio

Click here to view all Millennia products

You may also need...
Millennia AD-D96 HV-3D A/D Converter Expansion
Our Price: $1,349.99

Millennia AD-D96