Home > Instruments > Guitars > Amplifiers >

  Line 6 DT50 112 Combo Amplifier

Line 6 DT50 112 Combo
Line 6 DT50 112 Combo
 
List Price: $1,849.99
Our Price: $1,299.99


Availability: Usually Ships in 24 Hours
Product Code: 9999-12774

 

Line 6 DT50 112 Combo Amplifier

Line 6 DT50 112 Combo Amplifier

Line 6 DT50 112 Combo Amplifier Details

Classic American clean, chimey and crunchy English tones, modern high-gain distortion â?" all great amplifiers are based on one of these four celebrated amp voicings. Line 6 DT50 112 Combo Amplifier has them all, and the four-way Voicing switch on the front panel is your speed-dial to each one. Behind each Voicing is the perfect recipe of dynamic analog circuitry (which includes tube configuration and negative feedback loop topology), and HD amp modeling technology (which fuels the preamp and tone stack). The choice is yours. DT50/DT25 v2.0 firmware lets you create original amp tones by pairing your choice of 30 HD preamps with any combination of dynamic topologies (negative feedback loop, operating class, power tube mode and more) within Reinhold Bognerâ??s reconfigurable tube power amp.


Switchable Analog Components

Each Voicing can become a classic powerhouse or totally customized thanks to tube amp guru Reinhold Bognerâ??s uniquely flexible design. The (2) 12AX7 preamp and 50W, (2) EL34 power section offer easy reconfiguration of operating class (Class A/Class AB) and power tube mode (Pentode/Triode) for a wide range of feels and tones that can be added to each Voicing: modern or vintage, tight or dynamic.


Diver Down

State-of-the-art HD modeling technology goes deeper than modeling ever has and fully integrates into Reinhold Bognerâ??s power section. The two technologies combine and deliver a truly unique and powerful playing experience available only from Line 6 DT50 112 Combo Amplifier.


Low-volume Mode

HD modeling technology really comes alive in low-volume mode. Perfect for recording or quieter gigs, low-volume mode lets the HD modeling technology provide both preamp and power amp tones. You can perform with all the grit and gain you need without the volume that normally comes with it.


Celestion Speakers - A History of Great Tone

Celestion® guitar speakers are world renowned for their exceptional definition, clarity, and feel. Whether itâ??s sporting a Celestion Vintage 30 or a G12H90 that was custom-voiced for Line 6, Line 6 DT50 112 Combo Amplifier boasts clean tones that sparkle and sing, creamy overdrives that respond to the intricacies of your picking, and searing high-gain tones that launch themselves from the cabinet.


Total Reconfiguration

Line 6 DT50 112 Combo Amplifier goes from the perfect little clean machine to a brutal, brooding badass with all necessary components to make each tone sing. The Channel switch is your ticket to total, one-touch analog and digital reconfiguration. Any combination of voicing, operating class and power tube mode can be saved to either channel. Youâ??re not limited to just â??cleanâ?ť and â??dirtyâ?ť â?" you can have whatever you want.


Traditional Amp Operation

Quickly dial in your tone, or take your time customizing a classic. The front-panel features two channels (with identical Drive, Bass, Mid, Treble, Presence, Reverb, and Channel Volume knobs), a Master Volume knob and a few well-placed switches (including channel, operating class and power tube mode). Line 6 DT50 112 Combo Amplifier is so simple, you already know how to use it.


Sounds Great, Looks Sharp

The sleek, boutique aesthetic is inspired by the vision of master amp designer Reinhold Bogner. Premium Tolex® is carefully wrapped around every curve and corner, and the black and gold treatment is classy but earthy for a stunning on-stage presentation.


L6 LINKâ"˘ Connectivity

Line 6 DT50 112 Combo Amplifier and POD® HD multi-effect pedals donâ??t just connect, they integrate via L6 LINK technology. Here are a few advantages of connecting via L6 LINK. Selecting a POD HD preset automatically optimizes Line 6 DT50 112 Combo Amplifier analog components. Line 6 DT50 112 Combo Amplifier takes full advantage of the POD HD amp models and M-class effects. Changing tone settings on one updates the other. Edit POD HD tones simply by turning Line 6 DT50 112 Combo Amplifier knobs. Easily create stereo or wet/dry settings. Daisy-chain amps with standard XLR cables and POD HD will do the rest.


Serial Effect Loop

Effect pedals love Line 6 DT50 112 Combo Amplifier. Connect them via the serial effect loop and dial in the perfect amount with the adjustable return level.


MIDI

Integrate Line 6 DT50 112 Combo Amplifier into your MIDI rig and control amp parameters from channel switching on up, or pass MIDI through the amp from your POD HD.


XLR Direct Out

Micâ??ing your amp requires time, lots of gear, and a place for you to turn it up. These days, most of those things are hard to come by. Line 6 DT50 112 Combo Amplifier features a transformer-tapped direct output with cabinet simulation, which is ideal for fast, great sounding tones for studio recording or live performance.


Foot Control

Line 6 DT50 112 Combo Amplifier offers a variety of ways you can add foot control including simple channel switching via a common footswitch (1/4â?ť jack), MIDI control including Line 6 M9 and M13 Stompbox Modelers (MIDI in and out/thru), and L6 LINK for total seamless integration (L6 LINK jack). (Foot switch not included.)


Line 6 DT50 112 Combo Amplifier Features


  • Advanced HD modeling technology
  • Reinhold Bognerâ??s most flexible tube design
  • (2) 12AX7 preamp, (2) EL34 power amp (25W/50W)
  • Simple and straightforward 2-channel design
  • Each channel: Drive, Bass, Mid, Treble, Presence, Reverb, Channel Volume
  • Master volume
  • High and Low inputs
  • Reconfigurable analog components (Class A/Class AB; Pentode/Triode)
  • Complete, one-touch analog reconfiguration (via Channel select switch)
  • Low-power mode
  • 1x12" Celestion® custom G12H90 speaker
  • L6 LINKâ"˘ in/thru connection for POD® HD integration
  • MIDI in and out
  • Serial effect loop with level control
  • Footswitch jack for channel switching
  • XLR direct out with cabinet simulation and ground lift switch
  • 4, 8 and 16-ohm speaker outs
  • DT50/DT25 v2.0 firmware expands the HD preamp count from four to 30, lets you configure your own custom voicings, and more

Line 6 DT50 112 Combo Amplifier Specifications


  • Manufacturer: Line 6
  • Product: DT50 112 Combo Amplifier
  • Part No: 99-011-0505
  • Type: Hybrid
  • Channels: 2
  • Total Power: 50W/25W; Switchable Class A/Class AB
  • Speaker: 1 x 12" Celestion Custom G12H90
  • EQ: Ch 1: Bass, Mid, Treble; Ch 2: Bass, Mid, Treble
  • Preamp Tubes: 2 x 12AX7
  • Power Tubes: 2 x EL34
  • Inputs: 2 X Instrument
  • Outputs: 6 x Speaker
  • Dimensions: 21.75" x 26" x 10.75" (h x W x D)
  • Weight: 63.1 lbs

Line 6 DT50 112 Combo Amplifier Downloads



Click here to view all Line 6 Products