Home > Accessories > Stands > Microphone >

  K&M 211/1 Boom Arm, 21110.500.55 (Black)

K&M KM211/1
K & M KM211/1
 
List Price: $44.99
Our Price: $35.99


Availability: Usually Ships in 24 Hours
Product Code: 8455

 

K&M KM211/1 Telescoping Boom Arm

K&M KM211/1 Telescoping Boom Arm is the classic 18 1/4" to 30 3/4" two-piece telescopic boom arm with 3/8" thread.

K&M KM211/1 Telescoping 18 1/4" to 30 3/4" Boom Arm Details

The K&M KM211/1 Telescoping 18 1/4" to 30 3/4" Boom Arm is the classic two-piece telescopic boom arm with 3/8" thread. Silent, scratchless swivel joint for adjustment of angle, easy tightening with T-bar locking screw.

K&M KM211/1 Telescoping 18 1/4" to 30 3/4" Boom Arm Features

  • THE classic telescoping boom all others copy the look of, but miss the mark on when it comes to quality
  • T-bar locking screw design
  • Made in Germany using Swiss Steel

K&M KM211/1 Telescoping 18 1/4" to 30 3/4" Boom Arm Specifications

  • Boom arm: 2-piece telescopic design
  • Boom arm length: from 470 to 770 mm
  • Clamping: T-bar locking screw
  • Material: Swiss steel
  • Threaded connector: 3/8"
  • Type: black
  • Weight: 0.64 kg

What We Think

"For over 60 years, König & Meyer (K&M) has blazed a trail with long-lasting, professional-grade products that serious users have come to rely on and love. If you've been doing audio for a while, then you've probably recoiled at the price of a K&M stand and bought a cheap stand instead... only to have it fall apart on you, and FAST! It's pretty clear that not all stands are the same - even if the copies might look pretty similar to the original.

You know the symptoms of having bought a cheap mic stand: bent tubing, stripped-out fasteners, broken clutches, knobs that don't tighten... and the list goes on.

If there is one thing that I've come to know about gear, it's that there is a BALANCE of cost - and the currency can be either money invested OR frustration and lackluster (or even disastrous) results. Trust me - when you buy a cheap stand, you're PAYING for it with clumps of hair that you're ripping out of your head out of sheer frustration. This is why folks who buy König & Meyer the first time, ultimately have more hair... and have more money in their wallets over the long haul. They're still using the same stands that they bought to begin with.

Believe it or not, you're also paying for buying cheap stands via the sonic results. Mic stands transfer vibrational energy. If the metal tubing is thin, flimsy, porous metal as is present in the cheap stands, then they transfer more energy to the microphone. Heavy duty stands transfer far less energy to the microphone and as a result, less potential frequency masking and cancellation will occur.

If you're a professional and must rely on your gear to work without exception, then there is no other choice. K&M stands always deliver on demand. Case in point - a large moose of a man can stand on the legs of a tripod K&M stand and not break it. In fact, the legs don't even BEND. The extend outward and then retract back to their original position after the offending human steps off of the stand. The clutches and gears all work smoothly and tighten securely time after time. Metal on metal contact of these moving parts is reduced by design, and high density nylon barriers put in place where other brands will just push metal into metal and pretty much hope for the best. And should any of these parts wear out, König & Meyer maintains a stock of replacement parts for 10 years after the discontinuation of a product. The tubing will all stay good, and you can make your König & Meyer stand function like-new again with some new parts.

As a company, König & Meyer's reputation and commitment to quality and green manufacturing practices should be the envy of any manufacturer. Their unlimited commitment to quality and environment in the production process translates into the most effective use of raw materials, conservation of energy, greater use of renewable energies, recycling of parts and products at the end of their life, avoidance of pollutants in production, reduction of CO2 emissions, reduction of water consumption and treatment of waste water used in the production process to produce potable quality. Since 1979 König & Meyer has reduced their water consumption in the manufacturing process by 94 percent.

In an industry where all other such products' production has shifted to China where environmental impact is barely regarded, König & Meyer are made in Germany and their products offer the conscientious buyer a clear choice that will save them money over the long haul without having to replace stands every couple of months. Reducing unnecessary manufacturing is also green! Build it right the first time!

Save up your pennies and go for the good stuff. König & Meyer (K&M) stands will be an investment that you'll be glad that you made. It's peace of mind that reduces your frustration, saves you from potential damage to or losses of expensive microphones, and even prevents the loss of future work or conflict with a client (imagine the joint of your cheap-stand failing during a live taping in front of an audience - that's a pretty indefensible position to be in). When it absolutely must work right the first time, choose König & Meyer (K&M) stands.

Alan Moon - Front End Audio

Click here to view all K&M products