| JK Audio Daptor Two Details
Simply plug Daptor Two into the 2.5 mm headset jack of any wireless cell phone that accepts a third party headset or earpiece. You can now send and receive audio from your mixer or tape recorder through the cell phone.
Your cell phone will recognize Daptor Two as a headset which will disable the mic and speaker in the cell phone.
Audio Connections - You may use either the XLR input or 1/4" input, not both. The XLR input jack is disconnected when a cable is plugged into the 1/4" input jack. The same is true for the XLR and 1/4"output jacks.
Daptor Two was designed to take advantage of the increasing number of wireless phones that accept third party headsets and earpiece headsets. We've designed a circuit which emulates the electrical characteristics of these headsets. While some wireless phones have the 2.5 mm jack directly on the phone, others require a headset adapter which converts their proprietary connector into the 2.5mm jack. We do not provide this adapter.
JK Audio Daptor Two Features
- XLR and ¼" in and out
- Passive, no AC or battery power needed.
- Rugged diecast aluminum construction.
JK Audio Daptor Two Specifications
|
Inputs: |
XLR 600 ohms balanced, line level, 0 dBm max input.
1/4" mono, unbalanced, line level, 0 dBm max input. |
|
Outputs: |
XLR 600 ohms balanced, mic level, -25 dBm avg output.
1/4" mono, unbalanced, mic level, -25 dBm avg output.
Passive, no AC or battery power needed. |
|
Size: |
4.4" x 2.7" x 1.2" (11.2 x 6.9 x 3.5 cm) |
|
Weight: |
7 ounces | |
