 |
 |
 |
 |
IK Multimedia Amplitube 3 Pedal Details
Amplitube 3 Pedal is a bundle of IK Multimedia's Amplitube 3 software and StealPedal Interface
Amplitube 3 A massive upgrade of IK Multimedia's popular guitar and bass tone gear
modeling software, AmpliTube 3 provides even more sound variety,
realism, and creative power than earlier versions. If your recording or
playing "rig" is lacking in that rich, lush expressive analog warmth,
then you need to check it out. With over 160 precisely modeled pieces
of vintage and modern gear available in one package, AmpliTube 3 is an
incredible tone gear collection for the player/producer/engineer
suffering from tone angst.
More Gear - Infinite Combinations
AmpliTube 3 contains over 160 pieces of gear, more than double the
amount of most other packages, including models from the most
sought-after vintage collections and modern-day workhorses. You'll get
51 individual stompboxes and effects, 31 amplifier preamp & power
sections, 46 speaker cabinet models, 15 high-end stage and studio mics,
and 17 post amp rack effects. Plus, with the new AmpliTube 3 open
architecture, you can add more packages as you need them, like
AmpliTube Fender and Ampeg SVX.
More Feel - True Dynamic Response
AmpliTube 3 gear models give you ultra-realistic playing feel—not just
the tones—but the actual dynamic response of their hardware
counterparts. Plus, with IK's proprietary VRM (Volumetric Response
Modeling) technology, you can add totally accurate rotating speaker
effects and free dual mic placement with room ambience and response to
custom craft your tone.
More Power - Creative Inspiration
AmpliTube 3 unleashes more creative power than previous versions,
helping you to easily carve new, truly unique voicings for your guitar,
bass, keyboard, drum, and vocals. Our new creative effects let you
create sounds you never heard before, and the new "drag & drop"
effects configuration feature lets you quickly experiment with effects
in the signal chain to get that totally unique sound.
More Tone - More Than You Can Imagine
AmpliTube 3 is the voice for your soul. With this insanely large
collection of super-realistc modeled gear, creative effects, and
flexible routing features, you'll never run out of sonic possibilities.
The sound you want, the sound you need, is in here.
StealthPedal
The StealthPedal is a USB-powered guitar audio interface and software
controller in a compact wah-style pedal, allowing you to record, play,
and control the included "Powered by AmpliTube" software, or any other
MIDI controllable software, with the same feel and ease of use as a
traditional guitar pedal. StealthPedal lets you record guitar or bass
with your Mac or PC at 24-bit A/D and D/A conversion and CD-quality
44.1/48kHz operation. It has two separate inputs for Hi-Z or line-level
instruments, two separate outputs, plus a convenient headphone output.
StealthPedal
from IK Multimedia also works as a software floor controller. The
built-in expression pedal and switch can be associated with any
parameter of "Powered by Amplitube" software, or any other amp and FX
modeling software with MIDI control capabilities. The StealthPedal
controls can also be expanded with an additional expression pedal and
two extra switches for building a mini-pedalboard rig with preset and
single effects control capabilities for full live/recording usage.
You're not limited to controlling amp-simulator software with
StealthPedal, as it can control any effects plug-in, virtual
instrument, or DAW with MIDI control capabilities.
StealthPedal
sports a rugged, metal, classic wah-style, compact enclosure with a
volume knob and 3 LED indicators that operate as a status display,
tuner, or level indicator when used with any "Powered by AmpliTube"
software. Its circuit design has been derived from IK's StompIO
high-end stage controller, ensuring high-fidelity in the recording of
your guitar and bass with software configurable input gain level,
109dBA low-noise input stage, and optimal audio quality throughout.
StealthPedal
also comes with a must-have assortment of software, including AmpliTube
2 Live guitar and bass amp and FX modeling software, standalone and
plug-in, AmpliTube X-GEAR for further expandability with all "Powered
by Amplitube" software, and Sonoma Riffworks T4 for immediate
recording/composing/online sharing with your Mac or PC. The
StealthPedal and the included plug-in is also compatible with all
popular DAW software supporting ASIO and Core Audio drivers on PC and
Mac.
The smartest solution to plug into and control your Mac/PC
The StealthPedal is both an audio interface and a software controller
in one compact device. It is the smartest solution for plugging your
guitar and bass into your computer and immediately controlling the
included software or any of your preferred MIDI-controllable effects,
instruments, or DAWs.
The
built-in expression pedal and switch can be quickly associated with
Wah, Volume, or any effects parameter and effects on/off. The
additional inputs on the StealthPedal allow the connection of an
external expression pedal and a double switch, allowing you to extend
your software control capabilities and build a complete mini-rig with
preset-switching capabilities.
When used with any "Powered by AmpliTube" software, the 3 LED indicators also operate both as a Tuner or a level control.
A USB-powered interface with a big sound
The StealthPedal sounds amazingly good, especially when compared to
other USB powered interfaces. This has been achieved by implementing
various high-end electronic design techniques not commonly found in
other USB bus-powered interfaces. This includes a sophisticated
multiple power supply section that allows the StealthPedal to run at
internal higher voltages than what are usually found in other bus
powered devices.
This
device is a handy, USB powered audio interface, with a serious sound.
It's clean, punchy, detailed, quiet, and provides the sort of solid
sound quality that you can expect from interfaces costing three or four
times its price.
IK Multimedia Amplitube 3 Pedal Features AmpliTube 3
- Windows and Mac OS X Plug-in and Standalone application
- Supported Plug-in formats: Audio Units, VST, RTAS (Mac OS X) - VST, RTAS (Windows)
- 5 separate modules: Tuner, Stomp effects Pedalboard, Amp Head, Cabinet + Microphones, post Rack effects
- Over 160 included gear models
- 51 Stompbox effects
- 31 Amp models
- 46 Cabinet emulations
- 15 Studio Microphone models
- 17 Rack effects
- High-precision Tuner
- Cabinet module with two freely movable microphones and cabinet size control
- Room ambience with microphones' stereo width control
- Ultra accurate analog modeling with DSM technology
- Ultra realistic cabinet emulation with VRM technology
- 2 series/parallel rigs with 8 configurations, selectable mono/stereo input and true stereo processing
- Drag & Drop functionality in the Stomp and Rack modules for quick effects re-arrangement
- Advanced preset browser with guitar/bass dedicated keywords plus user keywords and smart search function
- Global and single gear presets
- Easy to set, one click best quality/performance settings
- Host/DAW BPM synchronization
- Freely assignable DAW automation
- Up to 96kHz supported sampling rate
- Can be directly expanded with more "Powered by AmpliTube" software like AmpliTube Fender and Ampeg SVX
- One click MIDI CTL assignment, compatible with any standard MIDI controller
- Direct integration with IK's range of interfaces/controllers like StompIO, StealthPedal, StealthBoard with zero setup needed
- 4-track recorder/player with independent time stretch/pitch shift (Standalone version)
- Non destructive recording allows post effect processing of the recorded audio (Standalone version)
- 2 simultaneous instruments can be processed with independent audio settings (Standalone version)
- Imports any WAV, AIFF, MP3, and WMA audio file (Standalone version)
- Metronome with selectable sounds (Standalone version)
Stealth Pedal- USB-powered audio interface and pedal controller
- 2 balanced/unbalanced audio inputs (Hi-Z or line level)
- 24-bit A/D and D/A conversion
- 64-bit drivers include a 32-bit compatibility, allowing you to work with 64-bit or 32-bit audio software applications
- 44.1/48kHz operation
- 2 balanced audio outputs
- Headphones output
- Volume control
- Built-in expression pedal and MIDI footswitch
- Multiple LEDs can operate as Tuner or Level indicators with AmpliTube
- External double switch and expression pedal inputs
- Classic, rugged metal Wah-style construction
- High-quality, low-noise input stage (109dBA /104dB RMS S/N ratio)
- Control all "Powered by AmpliTube" software/plug-ins
- Control any MIDI controllable software/plug-ins
- Includes AmpliTube 2 Live standalone and plug-in, AmpliTube X-GEAR and Sonoma Riffworks T4
- Compatible with all the most popular DAW software supporting ASIO and Core Audio drivers on PC and Mac
- Endless software expandability with AmpliTube modules
|
|
 |
 |
|
 |
|
 |

| Accessories for this product... |
|
|
|

|